Saved

Press the star next to a tool's name to save it.

All my tools

Lumber / Board Foot Calculator

This lumber / board foot calculator works out the board feet in one board or a whole stack from thickness, width and length, with cubic feet, cubic meters, waste and cost.

Restored your last values ·

For dimensional lumber such as 2×4s, enter the nominal size (2 and 4), as lumberyards do. For rough hardwood, measure the actual size.

Everything is worked out in your browser. Nothing you type is sent anywhere.

Total lumber

–

Enter the thickness, width and length.

See full result

A lumber / board foot calculator works out how many board feet are in a piece of lumber or a whole stack of boards, and what they'll cost. Enter the thickness and width in inches and the length in feet, add the number of boards and, if you like, the price per board foot and a waste allowance, and this board foot calculator gives the total board footage, the volume in cubic feet and cubic meters, and the cost. US units are the default, with millimeters and meters as an option.

What a board foot is

The board foot is the unit used to measure the volume of lumber in the United States and Canada. One board foot is the volume of a board one foot long, one foot wide and one inch thick: 144 cubic inches, or one twelfth of a cubic foot, which is exactly 2.359737216 liters. You'll see it written as BF, BDFT or FBM (foot, board measure), and a thousand board feet as MBF.

The board foot formula

With the thickness and width in inches and the length in feet:

Board feet = thickness × width × length ÷ 12

If all three are in inches, divide by 144 instead. Multiply by the number of boards for the total, and multiply the total by the price per board foot for the cost.

Worked example: a stack of 2×4s

You need ten 2×4 studs, 8 feet long, at $3.50 per board foot.

  1. One board: 2 × 4 × 8 ÷ 12 = 5.333 board feet.
  2. Ten boards: 53.33 board feet.
  3. Cost: 53.33 × $3.50 = $186.67.

Add a 10% waste allowance for offcuts and mistakes, and the total becomes 58.67 board feet, or $205.33.

Nominal and actual sizes

Planed softwood lumber, like the standard 2×4 sold at home centers, is sold by its nominal size even though it's smaller after drying and planing: a 2×4 actually measures about 1½ × 3½ inches. Board footage for surfaced softwood is still calculated from the nominal width and thickness and the actual length, which keeps pricing simple. So for dimensional lumber, enter the nominal 2 and 4, not 1.5 and 3.5.

Rough lumber, such as unprocessed hardwood from a sawmill, is measured before drying and planing using its full sawn dimensions. For rough boards, measure the actual thickness, width and length.

Hardwood thickness in quarters

Hardwood is often sold by thickness in quarters of an inch: 4/4 is 1 inch, 5/4 is 1¼ inches, 6/4 is 1½ inches and 8/4 is 2 inches. Enter the decimal value, such as 1.25 for 5/4, as the thickness.

How to use the board foot calculator

  1. Choose US or metric units.
  2. Enter the thickness and width in inches (or millimeters) and the length in feet (or meters).
  3. Enter how many boards of that size you need.
  4. Add the price per board foot to get a cost, and a waste percentage if you want spare.
  5. Press Calculate.

Metric lumber

In metric mode, enter the thickness and width in millimeters and the length in meters. The calculator converts them and gives board feet, which many suppliers still quote, along with cubic meters. A 50 × 100 mm board 2.4 m long is about 5.08 board feet, or 0.012 cubic meters.

Planning a project

Work out each different size separately, such as the legs, rails and top of a table, then add the totals. Buy a little extra, because knots, splits and cutting waste reduce the usable wood. Many woodworkers add 10 to 20% for hardwood projects, and less for simple framing.

Buying lumber by the board foot

Hardwood dealers and sawmills usually price their wood per board foot, while home centers often price dimensional lumber per piece. If a store lists a price per piece, you can still compare it with a board-foot price: divide the piece price by the board feet in one board. That makes it easy to see whether a bundle, a single board or rough stock from a mill is the better deal for your project.

When you shop, write down the thickness, width and length of every piece in your cut list, group the pieces of the same size, and run each group through the calculator. Adding the groups gives the board footage to ask for at the counter.

Board feet and weight

Board footage is a measure of volume, not weight. How heavy the wood is depends on the species and how dry it is, so two stacks with the same board footage can weigh very different amounts. If you need to know the weight, for example to plan delivery or a trailer load, multiply the volume in cubic feet by the wood's density from the supplier.

The cubic feet and cubic meters shown with each result make that step easy, and they also help when you compare prices quoted in different units by suppliers in other countries.

Common mistakes

  • Mixing inches and feet. In the formula, the length is in feet.
  • Using actual sizes for dimensional lumber. Lumberyards price by nominal size.
  • Forgetting waste. Allow for offcuts and defects.
  • Confusing board feet with linear feet. A linear foot is just length; a board foot is volume.

What next

Use this often? Add Lumber / Boa to your Home screen.

Frequently asked questions

How does the lumber / board foot calculator work?

It multiplies thickness (in) × width (in) × length (ft) and divides by 12 for each board, then multiplies by the number of boards and the price per board foot.

How many board feet are in a 2×4×8?

2 × 4 × 8 ÷ 12 = 5.33 board feet, using the nominal size.

Do I use nominal or actual size?

Nominal for planed softwood lumber such as 2×4s; actual sawn size for rough lumber.

What is 5/4 lumber?

Hardwood sold as 5/4 is 1¼ inches thick. Enter 1.25 as the thickness.

How do I convert board feet to cubic feet?

Divide by 12. One board foot is one twelfth of a cubic foot, or 144 cubic inches.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools