Saved

Press the star next to a tool's name to save it.

All my tools

Post Hole Concrete Calculator

Enter the hole diameter and depth, the post size and the number of holes. The post hole concrete calculator works out the concrete around each post and how many 40, 50, 60 or 80 lb bags to buy.

Restored your last values ·

About three times the post’s width.

Left for soil or a sloped cap.

Bag yields for QUIKRETE Concrete Mix: 40 lb 0.3, 50 lb 0.375, 60 lb 0.45 and 80 lb 0.6 cubic feet.

Concrete needed

–

Enter the hole’s diameter and depth.

See full result

The post hole concrete calculator works out how much concrete you need to set fence posts, deck posts, mailbox posts or swing-set legs in round holes. Enter the hole’s diameter and depth, pick the post size and the number of holes, and it subtracts the post and the gravel at the bottom, works out the concrete around each post, and tells you how many 40, 50, 60 or 80 lb bags to buy. For example, a 12-inch hole 30 inches deep around a 4×4 post, with 4 inches of gravel and the concrete stopping 3 inches below ground, takes about 1.34 cubic feet of concrete: 3 bags of 80 lb or 4 bags of 50 lb.

How the calculator works

  1. Concrete depth = hole depth − gravel − the gap left at the top.
  2. Area of the hole = π × (diameter ÷ 2)².
  3. Area of the post: a 4×4 is actually 3½ inches square and a 6×6 is 5½ inches; a round post uses π × (diameter ÷ 2)².
  4. Concrete per hole = (hole area − post area) × concrete depth, converted to cubic feet.
  5. Bags = total concrete ÷ the yield of one bag, rounded up. QUIKRETE Concrete Mix yields about 0.3 cubic feet per 40 lb bag, 0.375 per 50 lb, 0.45 per 60 lb and 0.6 per 80 lb.

How to use the post hole concrete calculator

  1. Choose US or metric units.
  2. Enter the hole diameter and depth.
  3. Choose the post size, or “no post” for a solid footing.
  4. Enter the number of holes.
  5. Check the gravel and top gap: they start at 4 inches of gravel and 3 inches left at the top, following HGTV’s fence post method.
  6. Add extra for spills and holes dug slightly too big, if you like.

Worked examples

One fence post: a 12-inch hole, 30 inches deep, with a 4×4 post. The concrete fills 30 − 4 − 3 = 23 inches. The hole’s area is 113.1 square inches and the post’s 12.25, leaving 100.85 square inches. 100.85 × 23 ÷ 1,728 = 1.34 cubic feet, so 3 bags of 80 lb (0.6 each) or 4 of 50 lb.

Ten posts: 10-inch holes, 36 inches deep, with 4×4 posts take 1.11 cubic feet each, or 11.13 cubic feet in all: 19 bags of 80 lb or 30 bags of 50 lb.

How big should post holes be?

HGTV’s rule of thumb is to dig the hole three times as wide as the post, so a 4×4 or a 4-inch round post goes in a 12-inch hole, and to make the depth one-third to one-half of the post’s height above ground. If you haven’t dug yet, the fence post depth calculator works out the depth and hole size for your fence height and frost line, and then this calculator can check the concrete for the holes you actually dig.

Gravel at the bottom

HGTV recommends adding three to four inches of gravel to the bottom of each hole and compacting it before setting the post. The gravel lets water drain away from the end of the post instead of sitting in a cup of concrete, which helps wooden posts last longer. Enter 0 in the gravel box if you’re pouring concrete under the post instead.

Fast-setting concrete

Fast-setting concrete is popular for posts because you can pour it dry into the hole and add water, without mixing. HGTV describes filling the hole with dry mix to about 3 inches below the lip and then soaking it with water. Check the bag for its yield: QUIKRETE’s fast-setting mix comes in 50 lb bags. Regular concrete mix is mixed first and poured, and often costs less per cubic foot.

Tips for setting posts

  • Call 811 before you dig so buried lines can be marked.
  • Brace each post plumb on two sides before the concrete sets.
  • Slope the top of the concrete away from the post so water runs off.
  • Buy a spare bag; holes are rarely dug to the exact size.

Why the post is subtracted

A post takes up space in the hole that doesn’t need concrete. In a 12-inch hole, a 4×4 post takes up about 11% of the area, and a 6×6 about 27%. In a narrow hole, the post takes a bigger share, so subtracting it makes a real difference to the bag count. Choose “no post” for a solid concrete footing, such as one a post base or anchor will be bolted to after the concrete cures.

Metric units

In metric mode, enter the hole size, the gravel and the top gap in centimeters. The calculator gives the concrete in liters, and the bag counts stay in pounds because that’s how the concrete is sold in the US. One cubic foot is about 28.3 liters, so an 80 lb bag makes about 17 liters of concrete.

Deck and pergola posts

Posts that carry a deck, porch or pergola hold up a structure rather than a fence, and local codes often set the size and depth of their footings, sometimes with a wider base below the frost line. Use the hole size your plans or building department require, enter it here to count the bags, and choose “no post” if the post will sit on a bracket above a solid footing.

For slabs, footings and columns, use the concrete calculator, and for the whole fence, the fence calculator.

What next

Use this often? Add Post Hole Co to your Home screen.

Frequently asked questions

How does the post hole concrete calculator work?

It takes the hole’s area minus the post’s, multiplies by the depth the concrete fills (less gravel and the top gap), and divides by the yield of a bag.

How many bags of concrete do I need per fence post?

For a 4×4 post in a 12-inch hole 30 inches deep, with 4 inches of gravel and a 3-inch top gap, about 3 bags of 80 lb or 4 bags of 50 lb.

How much concrete does an 80 lb bag make?

About 0.6 cubic feet. A 50 lb bag makes about 0.375 cubic feet.

How wide should a post hole be?

About three times the post’s width: 12 inches for a 4×4 and 18 inches for a 6×6.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools