Saved

Press the star next to a tool's name to save it.

All my tools

Wheel Offset Calculator

Use this wheel offset calculator to compare a new wheel with your current one and see the change in clearance and in position, from the width and offset of both.

Restored your last values ·

mm
mm

Enter the width and the offset of the wheel you have now and of the new wheel. The calculator gives the change in clearance and the change in position of the wheel, in millimetres.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the current and the new wheel width and offset, then press Compare the wheels.

See full result

A wheel offset calculator compares the position of a new wheel with the wheel you have, so that you can see how much its width and offset change the clearance. Enter the width and the offset of the current wheel and of the new one, and the calculator gives the change in clearance and the change in position, in millimetres. It uses simple geometry, which is our own working, with offset defined as in a tire retailer's guide.[1] It runs in your browser and nothing you enter is sent anywhere.

How to use the wheel offset calculator

  1. Choose whether the wheel widths are in inches or millimetres.
  2. Enter the width and offset of the current wheel.
  3. Enter the width and offset of the new wheel.
  4. Press Compare the wheels. The offsets are always in millimetres.

What offset is

The offset says where the surface that is bolted to the hub sits compared with the centre line of the wheel, and it is given in millimetres. A positive offset puts the mounting surface toward the street side of the centre line, and a negative offset puts it behind the centre line.[1] As a result, a positive offset sits the wheel further inward, toward the suspension, and a negative offset sits it further outward (our own reasoning from the geometry). Enter the offsets with the signs your wheel maker prints on the wheel, and compare the result with the clearance you can measure on your car.

The formulas

Two formulas follow from the geometry. The clearance change is half of the difference between the current width and the new width, plus the difference between the current offset and the new offset. The position change is half of the difference of the widths, minus the difference of the offsets. All the quantities are in millimetres, so wheel widths in inches are changed to millimetres first, using 25.4 millimetres to the inch.

Worked example

The worked example changes a wheel of 7 inches, which is 177.8 millimetres, with an offset of 42 millimetres, to a wheel of 8 inches, which is 203.2 millimetres, with an offset of 32 millimetres. Half the difference of the widths is minus 12.7 millimetres, and the difference of the offsets is 10 millimetres. The clearance change is minus 12.7 plus 10, which is minus 2.7 millimetres, and the position change is minus 12.7 minus 10, which is minus 22.7 millimetres. Read as geometry, the inner edge of the new wheel moves 2.7 millimetres toward the suspension, and the outer edge moves 22.7 millimetres outward toward the fender. In another example, a difference of 2 millimetres in both width and offset gives a clearance change of 3 millimetres.

Reading the two results

A negative clearance change means less room on the inner side of the wheel, and a negative position change means that the outer edge has moved outward (our own working from the formulas). Use the numbers to compare the new wheel with the old one, and measure the space around the old wheel on your car to see how much room you have. A wider wheel with the same offset grows on both sides, so half of the extra width goes toward the fender and half toward the suspension.

Backspacing

Backspacing is the distance from the mounting surface to the inner lip of the wheel, and it changes with the width. The calculator does not need it, since the offset and the width contain the same information.

What else to check

The fender, the brakes and the speedometer can be affected by a change of wheels and tyres. The offset should leave enough room so that the tire does not rub on the suspension, the brakes or the body, and the retailer advises keeping the new offset within 5 millimetres of the original and asking a tire professional to confirm the fit.[1] Check the clearance by turning the steering lock to lock, and by compressing the suspension, with the new wheels fitted loosely. If you change the diameter of the tyre, our speedometer and RPM tools can show the effect.

Reading the result

The calculator shows two numbers in millimetres, the change in clearance and the change in position. The clearance change tells you how the space between the new wheel and the parts around it compares with the old wheel, and the position change tells you how far the wheel as a whole has moved. If both are small, the new wheels should fit like the old ones. If either is large, check the fit by measuring and, if possible, by trying the wheel on the car.

Width and offset together

A wider wheel takes more room on both sides, and changing the offset moves the whole wheel in or out. The formulas combine the two: half of the change of width goes to each side, and the difference of the offsets shifts the wheel. This means that a wider wheel with a suitable change of offset can keep the outer edge, or the inner edge, in the same place. Work out which side of the wheel you want to keep, and choose the offset to match.

Checking the fit

Before you buy, measure the distance from the inside of the wheel to the suspension parts and the distance from the outside to the fender. Compare these with the results of the calculator. Check the clearance with the steering turned fully each way, with the suspension compressed and with the tyre fitted, because the tyre is wider than the rim.

Common mistakes

  • Mixing up the signs. Enter the offsets with the signs printed on the wheels.
  • Entering the width in the wrong unit. Choose inches or millimetres first.
  • Ignoring the tyre. A wider tyre needs more room.
  • Forgetting the brakes. Check the caliper clearance.

What next

Use this often? Add Wheel Offset to your Home screen.

Frequently asked questions

What is a wheel offset calculator?

A tool that compares the width and offset of a new wheel with the current one, and gives the change in clearance and position.

How do you calculate the clearance change?

(Current width − new width) ÷ 2 + (current offset − new offset), in millimetres.

How do you calculate the position change?

(Current width − new width) ÷ 2 − (current offset − new offset).

What is the result for a 7 in, +42 wheel changed to an 8 in, +32 wheel?

A clearance change of −2.7 mm and a position change of −22.7 mm, as in the worked example above.

What is backspacing?

The distance from the mounting surface to the inner lip of the wheel.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools