A water soluble fertilizer calculator tells you how many grams of a soluble fertilizer to dissolve to reach a target concentration of nitrogen, phosphorus or potassium. Enter the label percentages, the target in ppm and the volume of solution. It also shows the ppm of all three nutrients that you will get.
How to use the water soluble fertilizer calculator
- Choose US or metric units and the element to reach.
- Enter the N, P₂O₅ and K₂O percentages from the label.
- Enter the target ppm and the volume.
- Press Calculate and weigh the grams shown.
ppm and mg/L
Wikipedia says that 1 ppm corresponds to 1 mg/L in dilute water solutions [2]. That is accurate enough for the dilute solutions of a nutrient feed, though it is an approximation. A target of 200 ppm of nitrogen therefore means 200 milligrams of nitrogen in each litre of solution. The calculator uses that equivalence throughout.
The formula
The tool divides the concentration of the nutrient by its percentage by weight, written as a decimal, to get the concentration of the fertilizer in mg/L. It then multiplies the fertilizer concentration in grams per litre by the volume in litres to get the grams. These steps are our own working. Combined, the grams are the target in ppm times the litres, divided by 10 times the percentage. The combined form is also our own working.
A worked example
For a target of 200 ppm of nitrogen from a 20-8-20 fertilizer and 100 litres, divide 200 by 0.20 to get 1,000 mg/L, which is 1 gram per litre, and multiply by 100 litres to get 100 grams. Check: 100 grams times 0.20 is 20 grams of nitrogen in 100 litres, which is 200 mg/L. The calculator gives the same 100 grams in metric mode.
Phosphorus and potassium
Labels give phosphate, P₂O₅, and potash, K₂O, not the elements. On a label the first number is nitrogen, the second is P₂O₅ and the third is K₂O, and fertilizers do not actually contain those oxides [1]. The tool converts the phosphorus by dividing the P₂O₅ by 2.29133 and the potassium by dividing the K₂O by 1.20460. These factors follow from the molar masses of 141.943 g/mol for P₂O₅ [3] and 94.196 g/mol for K₂O [4], each of which holds two atoms of the element. In the example, the 8 percent of P₂O₅ is 3.49 percent of phosphorus and the 20 percent of K₂O is 16.6 percent of potassium. The 100 grams then give 34.91 ppm of P and 166.03 ppm of K, our own working.
Choosing the element
The target is for one element, which you select. The others come with it in the proportion of the label. If you aim for 50 ppm of phosphorus with the same fertilizer, you need 143.2 grams per 100 litres, and the nitrogen reaches 286.4 ppm. The calculator shows all three, so you can see whether the other nutrients are too high before you mix.
US gallons
In US mode, enter the volume in US gallons. We convert with 1 US gallon equal to 3.785411784 litres, the standard definition. For the 200 ppm example in 25 gallons, which is 94.635 litres, you weigh 94.635 grams. The result also lists the grams per litre and per gallon, and the ounces, using 28.349523125 grams per ounce.
Checking the label
The nutrients in a fertilizer cannot add up to more than 100 percent of its weight. The calculator adds the nitrogen, the phosphorus and the potassium, after converting the last two to elements, and shows an error when the sum exceeds 100 percent. A 20-20-20 fertilizer adds up to 45.33 percent after the conversion. For the 20-8-20 of the example, the sum is 40.09 percent.
Calcium and other salts
Some feeds are planned in mmol/L, for example for calcium. In a worked example, 5.4 mmol/L of calcium from a 19 percent source is 5.4 times 40.078, or 216.4 mg/L, divided by 0.19, or 1,139 mg/L, which is 1.139 grams per litre. This calculator does not have that mode. To use it by hand, multiply the mmol/L by the molar mass to get mg/L, then divide by the percentage.
Water and storage
Estimating by the tablespoon or by volume is inaccurate, so weigh the fertilizer. Salts and calcium already in tap water add to what the plant receives, so subtract them from the target if you know them. It is usual practice to keep a calcium stock apart from phosphates and sulfates.
Limits
The atomic weights behind the conversion factors are standard values, and no extension service page was used for this tool. The tool gives no pH, EC or crop advice: crops differ in the targets that suit them, so use the target from your own feeding plan or the fertilizer label. Treat the result as the arithmetic of mixing, and check it with a meter if you can.
Scaling the recipe
The grams scale in a straight line with both the volume and the target. A recipe of 1 gram per litre needs 10 grams for 10 litres, and doubling the target of the same element doubles the grams. If you mix a small batch first, you can multiply the weight to make a larger one. The calculator shows the grams per litre so that you can do this by hand.
Common mistakes
- Entering P₂O₅ as if it were P. The label figure is the oxide.
- Mixing gallons and litres. Choose the unit first.
- Measuring by spoon. Weigh the grams instead.
- Ignoring the salts in tap water. They add to the target.
What next
Use this often? Add Water Solubl to your Home screen.
Frequently asked questions
What is a water soluble fertilizer calculator?
A tool that finds how much soluble fertilizer to dissolve in water to reach a target ppm of N, P or K.
How many grams of fertilizer give 200 ppm of nitrogen?
With a 20 percent nitrogen fertilizer, 1 gram per litre, so 100 grams in 100 litres.
How do I convert P2O5 and K2O to P and K?
Divide the P2O5 by 2.29133 for phosphorus and the K2O by 1.20460 for potassium.
Is ppm the same as mg/L?
Wikipedia says that 1 ppm corresponds to 1 mg/L in dilute water solutions, which is a good approximation.
Why weigh the fertilizer instead of using a spoon?
Estimates by volume, such as tablespoons, are inaccurate, so weighing gives a more reliable dose.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.