Saved

Press the star next to a tool's name to save it.

All my tools

Water Softener Size Calculator

Use this water softener size calculator to work out the grains of capacity you need from your water hardness, the number of people in the home and the days between regenerations.

Restored your last values ·

days

Get the hardness from a water test or your water supplier’s report. Leave the water use box blank to use 82 gallons per person per day, and the days box blank for a 7 day cycle.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter your water hardness and the number of people, then press Calculate.

See full result

A water softener size calculator turns your water hardness and household size into the capacity you need, in grains. Enter the hardness from a water test, the number of people and how often you want the softener to regenerate, and it returns the grains removed each day and the capacity to look for.

How to use the water softener size calculator

  1. Choose the hardness unit. Grains per gallon (gpg) or milligrams per litre (mg/L) both work.
  2. Enter your water hardness from a test or from your supplier’s report.
  3. Enter the number of people in the home.
  4. Leave the water use and days boxes blank to use the defaults, or type your own, then press Calculate.

The water softener sizing formula

The calculation has three steps. This method is our own working from the definition of the grain, not a published standard.

  • Grains per day = hardness in gpg × people × gallons per person per day.
  • Capacity needed = grains per day × days between regenerations.
  • If your hardness is in mg/L, divide by 17.12 to get grains per gallon.

A grain per gallon is defined as 1 grain, which is 64.8 milligrams, of calcium carbonate dissolved in 1 US gallon of water. One gpg equals 17.12 mg/L, and one mg/L equals 0.05842 gpg. [1]

Hardness classes

The Water Quality Association bands, as listed on Wikipedia, put soft water at up to 3.5 gpg, moderate at 3.5 to 7.0, hard at 7.0 to 10.5 and very hard above 10.5. [1] The calculator shows the class for your number. The mg/L equivalents in the table are our own conversion at 17.12.

ClassGrains per gallonAbout mg/L
Soft0 to 3.50 to 60
Moderate3.5 to 7.060 to 120
Hard7.0 to 10.5120 to 180
Very hardOver 10.5Over 180

How much water does a person use?

The EPA WaterSense program says each American uses an average of 82 gallons of water a day at home. [2] That is the default here, about 310 litres. Households with a lot of laundry, long showers or a garden connected to softened water use more. If you know your real figure from a water bill, type it in the water use box.

Worked example

Suppose the water is 15 gpg and four people live in the home. Water use is 4 × 82 = 328 gallons a day. Hardness removed each day is 15 × 328 = 4,920 grains. With a 7 day cycle the softener should have at least 4,920 × 7 = 34,440 grains of capacity, about 34 kilograins.

The same water reported as 257 mg/L is 257 ÷ 17.12, which is about 15.0 gpg, so it gives almost the same answer. In metric mode the household use appears in litres, about 1,242 L a day for four people.

Reading your water report

Hardness is the amount of dissolved calcium and magnesium in the water, reported as if it were all calcium carbonate. A lab test, a home test kit or your water supplier’s yearly quality report will give a number in mg/L, ppm or grains per gallon. Treat mg/L and ppm as the same thing here. If you have a private well, test it, because the hardness can change with the season and with how much the well is pumped. Use the highest reading you trust, so the softener is not undersized in the hardest part of the year.

How the regeneration cycle changes the size

A softener holds a fixed amount of hardness before it has to regenerate. A larger tank lets you wait longer between cycles, and a smaller tank regenerates more often. The days box lets you test both. A 7 day cycle is the default in this calculator and is our own choice. Try 3 or 4 days to see a smaller unit, or 10 to 14 days to see a larger one. Choose the cycle that suits how you want to run the unit, and always compare the capacity with the maker’s rating.

Hardness drives the answer almost one for one. Halve the hardness to 7 gpg for the same four people and the daily load falls to 7 × 328 = 2,296 grains, which is 16,072 grains over seven days. Add a fifth person at 15 gpg and the daily load rises to 6,150 grains. Try a few combinations to see how much margin you want.

Choosing a softener from the result

  • Look for a softener whose rated capacity is at least the capacity shown, at the salt dose you plan to use.
  • A shorter cycle needs a smaller capacity but regenerates more often. A longer cycle needs a bigger unit.
  • If your water is already soft, a softener may not be needed. The class line tells you.
  • Iron, manganese and chlorine can affect a softener, so check the water report.

Common mistakes

  • Mixing up mg/L and gpg. A reading of 150 mg/L is only about 8.8 gpg.
  • Counting a guest room or an empty room as a person. Count the people who live there.
  • Forgetting water used outdoors. Many homes soften only indoor water.
  • Buying exactly the capacity from the result. Leave some room for guests and hard water changes.

This is an estimate to help compare sizes, not a promise of performance. Salt use, flow rate, water pressure and the age of the resin all change how a softener works in practice. Ask a water treatment professional or the maker for a recommendation for your home.

What next

Use this often? Add Water Soften to your Home screen.

Frequently asked questions

How does a water softener size calculator work?

It multiplies your hardness in grains per gallon by the people in the home and the gallons each person uses per day. That gives grains per day, and multiplying by the days between regenerations gives the capacity.

How do I convert mg/L to grains per gallon?

Divide the mg/L reading by 17.12. One grain per gallon equals 17.12 mg/L.

How many gallons per person should I use?

The EPA WaterSense program gives an average of 82 gallons per person per day at home, which is the default. Use your own figure if you know it.

What water hardness needs a softener?

The Water Quality Association bands call water hard above 7.0 gpg and very hard above 10.5 gpg. Many people consider a softener at those levels, but the choice is yours.

Is the result the exact softener size I must buy?

No. It is an estimate of the capacity to look for. Compare it with the maker rating at your salt setting and ask a water treatment professional.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools