A water hardness calculator turns the calcium and magnesium in a water analysis into hardness expressed as calcium carbonate, and converts hardness between mg/L, mmol/L, grains per gallon and the German, French and English degrees. It also tells you whether the water is soft, moderately hard, hard or very hard.
How to use the water hardness calculator
- Choose what you know.
- Enter the calcium and magnesium in mg/L, or a hardness value and its unit.
- Press Calculate.
What hardness is
Hard water contains dissolved calcium and magnesium, and its hardness is the sum of the molar concentrations of the two ions [1]. It is usually quoted as the equivalent amount of calcium carbonate, so that a single figure describes the mixture. One millimole per litre corresponds to 100.09 mg/L of calcium carbonate, or 40.08 mg/L of calcium [1].
From calcium and magnesium
To express your minerals as calcium carbonate, multiply calcium by 100.09 ÷ 40.08, about 2.497, and magnesium by 100.09 ÷ 24.305, about 4.118, and add them. The page gives the calcium ratio and, in another part, a rounded factor of 2.5 for calcium [1], but it does not give the magnesium factor, so that one is our own calculation from the molar masses. For 80 mg/L of calcium and 20 mg/L of magnesium, the hardness is 282.12 mg/L as calcium carbonate.
The units
The page defines the units. A part per million is 1 mg/L of calcium carbonate. A grain per US gallon is a grain, 64.8 mg, of calcium carbonate per gallon, which is 17.118 ppm. A German degree, dGH, is 10 mg/L of calcium oxide or 17.848 ppm. An English or Clark degree is a grain per imperial gallon, 14.254 ppm. A French degree is 10 mg/L of calcium carbonate [1]. The calculator uses these values to convert in any direction, and shows all of them.
A worked example
Take 150 mg/L as calcium carbonate. That is 1.4987 mmol/L, 8.7627 grains per gallon, 8.4043 German degrees, 15 French degrees and 10.523 English degrees. These come from dividing by the factors above, and are our own calculations. The same water is classed as hard.
The classification
The page gives the USGS scale in mg/L of calcium carbonate: soft water is 0 to 60, moderately hard 61 to 120, hard 121 to 180 and very hard 181 and above [1]. The same scale in German degrees runs to 3.37, 6.74 and 10.11, and in grains per gallon to about 3.5, 7.0 and 10.5 [1]. The calculator labels your result with these bands. The example with 80 mg/L of calcium and 20 mg/L of magnesium is very hard.
What hardness does
Hard water leaves scale in kettles and pipes and reduces how well soap lathers, because the calcium and magnesium react with the soap. It is not a health hazard in itself. Softening removes or replaces the ions. Knowing the hardness helps you set the dose of a softener, the descaling interval of an appliance and the amount of detergent.
Getting the numbers
Your water supplier's report usually lists calcium, magnesium or total hardness. If it gives only a total in one unit, use the conversion mode. If it gives calcium and magnesium, use the first mode. Check the unit: some reports quote hardness as the calcium alone, and the factor then differs.
Softening and dosing
The hardness figure tells you how much exchange capacity a softener must supply. A household using 200 litres a day of water at 250 mg/L as calcium carbonate takes in 50 grams of hardness each day, which a resin bed of known capacity removes before it must be regenerated. The calculator gives the hardness in grains per gallon, the unit most softeners in the United States are rated in.
Scale and appliances
Scale forms when hard water is heated, because calcium carbonate is less soluble when warm. Manufacturers of kettles, coffee machines and dishwashers give descaling intervals by hardness band, so find your band with the calculator and follow the maker's table. In very hard water, expect to descale more often.
Different countries, different units
The units differ by region. German degrees are common in Europe, French degrees in France and parts of southern Europe, English degrees in older British sources and grains per gallon in the United States. The conversion mode lets you translate a report from one into any other.
Example from a report
A report might list calcium at 45 mg/L and magnesium at 12 mg/L. The hardness is 2.497 × 45 + 4.118 × 12, which is 161.8 mg/L as calcium carbonate, about 9.1 German degrees or 9.5 grains per gallon. That is hard water on the USGS scale, and worth treating if you want to avoid scale.
Choosing a target
The right hardness depends on the use, so decide what you want the water to do before you set a target.
Common mistakes
- Mixing the grain units. US grains per gallon and Clark degrees are different.
- Adding calcium and magnesium without factors. Convert both to calcium carbonate first.
- Reading ppm as the ion alone. ppm here means mg/L as CaCO₃.
- Treating the bands as laws. They are guides that vary by source.
What next
Use this often? Add Water Hardne to your Home screen.
Frequently asked questions
What is a water hardness calculator?
A tool that turns calcium and magnesium into hardness as calcium carbonate and converts between hardness units.
How do I convert ppm to grains per gallon?
Divide the ppm by 17.118. For 150 ppm that is 8.76 gpg.
How do I convert ppm to German degrees?
Divide by 17.848. For 150 ppm that is 8.40 °dH.
What is hard water?
Under the USGS scale, water above 120 mg/L as calcium carbonate is hard, and above 180 mg/L it is very hard.
How do I find hardness from calcium and magnesium?
Hardness = 2.497 × Ca + 4.118 × Mg, in mg/L as calcium carbonate.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.