A vegetable yield calculator estimates how much a row of a crop may give. Choose the vegetable, the row length and the number of rows. It scales the published yield per 10 feet of row from two extension guides, and shows the plants per row and the garden area.
How to use the vegetable yield calculator
- Choose US or metric units and the crop.
- Enter the row length and the number of rows.
- Add the space between rows if you know it.
- Press Calculate and compare the two yields.
What the tool does
Each guide gives an expected harvest for 10 feet of row. The calculator scales that figure to your row: the yield for 10 feet, times the row length divided by 10, times the number of rows. That scaling is our own working, because neither guide states a formula [1] [2]. Everything else on the page, the plants per row and the area, is built the same way from the tables.
Virginia Cooperative Extension ranges
Virginia Cooperative Extension publishes a planting guide with a low and a high yield per 10 feet of row, with the in-row and between-row spacings, for the home garden [1]. Tomatoes are 15 to 45 pounds, bush beans 3 to 5 pounds, cabbage 10 to 25 pounds and potatoes 10 to 20 pounds per 10 feet. The calculator shows the scaled range for your row and your number of rows.
Purdue single figures
Purdue Extension publication HO-124 on small plot and intensive gardening gives one figure per 10 feet of row [2]. Tomatoes are 60 pounds, snap beans 6 pounds, pumpkins 40 pounds, sweet corn 13 ears, cabbage 10 heads, radishes 10 bunches and watermelons 7 melons. Some crops are counted in units other than pounds, and the calculator keeps the guide's own unit instead of converting it.
Why there are two columns
The guides do not always agree. Tomatoes show a range of 15 to 45 pounds in one and a single 60 pounds in the other. Both give approximate yields per 10 feet and neither says how soil, climate or variety changes them [1] [2]. Showing both lets you see the spread. A low estimate is a safer plan for a small bed, and the high one shows what a well cared for row can do.
A worked example
Take 3 rows of tomatoes, each 20 feet long. The Virginia range of 15 to 45 pounds per 10 feet becomes 30 to 90 pounds per row and 90 to 270 pounds in total. The Purdue figure of 60 pounds gives 120 pounds per row and 360 pounds in total. The calculator points out that 360 pounds is above the Virginia range, which is a sign of how wide the estimates can be.
Plants per row
The Virginia guide gives an in-row spacing for most crops [1]. The calculator divides the row length by the widest spacing and by the closest one, rounding down, to give a range of plants. For tomatoes at 18 to 36 inches in a 20 foot row, which is 240 inches, that is 6 to 13 plants. This division is our own. A few crops, such as spinach and mustard, are thinned, so no count is shown for them.
Garden area
The area is the row length times the number of rows times the space between rows, which is our own working. The guides give no formula for the area either. If you leave the spacing blank, we use the middle of the Virginia between-row range. For 20 feet, 3 rows and 36 inches, the area is 180 square feet.
Different units
Pounds, ears, heads, melons and bunches cannot be added or compared directly. When the two guides use different units for one crop, such as cabbage in pounds and heads, the calculator says so and does not claim that the figures agree. Where both guides use pounds, it tells you whether the Purdue figure falls below, inside or above the Virginia range.
US and metric units
US mode is the default and uses feet and pounds. Metric mode takes the row length in metres and the spacing in centimetres, and shows kilograms. The conversions are the standard ones, a foot of 0.3048 metres and a pound of 0.45359237 kilograms, and they are our own addition. The ears, heads, melons and bunches are not converted, since they are counts.
Crops with one guide
Parsnips, rhubarb and leaf lettuce are only in the Purdue table, so the Virginia line says there is no figure. Pole beans, Chinese cabbage, collards and kale, leeks, head lettuce, mustard, southern peas and rutabagas are only in the Virginia table. The tool names the missing guide and shows the other. Remember that the yields are potential figures, so allow for pests, weather and the odd failed plant.
Using the estimate to plan a bed
Use the low end of each range to decide how much space you really need, and the high end to see what a well tended row might give. Because every figure is scaled in a straight line, doubling the row length doubles the yield, and the same is true of the number of rows. Compare two crops with the same row length to see which one gives more food for the space, then check the spacing before you plant.
Common mistakes
- Reading the yield as a promise. It is an average planning figure.
- Using the wrong unit. Pounds, ears and heads differ.
- Forgetting that rows need space. Check the between-row spacing.
- Comparing figures from different crops. Choose the exact crop.
What next
Use this often? Add Vegetable Yi to your Home screen.
Frequently asked questions
What is a vegetable yield calculator?
A tool that scales the published yield per 10 feet of row to your row length and number of rows.
How much will 20 feet of tomatoes give?
The Virginia guide gives 30 to 90 pounds for 20 feet of one row, and the Purdue guide gives 120 pounds.
Why do the two guides differ?
They are approximate averages from different sources, and neither states how soil, climate or variety change the yield.
How are plants per row counted?
The row length is divided by the in-row spacing from the Virginia guide, giving a range, and rounded down.
Is the yield guaranteed?
No. It is a planning estimate and real harvests vary with variety, weather, soil and care.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.