A vegetable seed calculator tells you how many seeds or seedlings a garden row will hold. Enter the row length, the number of rows and the crop. It divides the row by that crop's spacing, rounding down, and with a germination rate it also shows how many seeds to sow.
How to use the vegetable seed calculator
- Choose US or metric units, and whether you count seeds or seedlings.
- Pick the vegetable, or choose Other and type your own distance.
- Enter the row length and the number of rows.
- Add a germination rate if you want the seeds to sow, then press Calculate.
How the count works
The number of seeds in a row is the row length divided by the distance between seeds, rounded down. The number of planting positions is the seeds in one row times the number of rows. Rounding down is deliberate, so that leftover space in one row is never added to the next. These steps are our own working. A 100 inch row of Brussels sprouts at 12 inches holds 8 seeds, because 100 divided by 12 is 8.33. The last 4 inches stay empty.
The spacing table
The tool lists two distances for each of 33 vegetables, one for seeds and one for seedlings, in inches. Beans are 4 and 4, carrots are 2 and 4, lettuce is 6 and 8, peas are 1 and 1, and tomatoes are 0.5 and 24. For a listed crop you only choose its name. These are the tool's own typical planning values, not rules, and extension guides give ranges that can differ: Virginia Cooperative Extension lists bush beans 1 to 3 inches apart, garden peas 2 to 3 inches, head lettuce 6 to 10 inches and tomato transplants 18 to 36 inches [3].
Seeds or seedlings
Choose what you are counting. For seedlings, take peppers: a 1,000 inch row at 12 inches holds 83 plants, because 1,000 divided by 12 is 83.3. Virginia Cooperative Extension gives pepper transplants an in-row spacing of 12 to 24 inches [3]. The seedling distance is usually wider than the seed distance, since a transplant already has leaves and needs room, while seeds are sown closer together and thinned later. The calculator therefore uses the right column of the table when you pick seedlings.
Crops grown from transplants
In the table, celery, eggplant and peppers have a seed distance of 0 inches, which marks them as crops that are grown from transplants. Virginia Cooperative Extension also lists eggplant and peppers as started from transplants [3]. A division by zero is meaningless, so the calculator does not attempt it. It asks you to choose seedlings instead, and then counts the plants at the transplant distance of 8, 18 and 12 inches. This handling is our own, but it follows the table.
Allowing for germination
The seed counts above do not include germination, so this part is our own addition. Illinois Extension says that seed with a germination rate of 70 to 90 percent should be sown a little heavier than normal, and that below 50 to 60 percent it is better to buy new seed [1]. The page gives no formula, so we use a simple one: the seeds to sow are the positions divided by the rate, rounded up. For 20 positions at 80 percent that gives 25 seeds.
Testing your seed
To find the rate, divide the number of viable seeds by the total number tested and multiply by 100. The Maine extension bulletin gives the example of 23 viable seeds out of 25, which is 92 percent [2]. Illinois Extension describes a test with ten seeds, which is a quick check before the season [1]. At 92 percent, the 20 positions of the earlier example need 22 seeds, since 20 divided by 0.92 is 21.7, and we round up.
Your own spacing
For a vegetable that is not in the list, or a spacing you prefer, choose Other and type the distance. The calculator then divides the row by that number, in inches in US mode and in centimetres in metric mode. A row of 120 inches at 12 inches in 2 rows holds 10 per row and 20 in all. The distance you type is used for both seeds and seedlings.
US and metric units
US mode is the default and works in inches. Metric mode works in centimetres: the row length and your own distance are entered in centimetres, and the table distances are converted by multiplying inches by 2.54, which is our own conversion and not part of the page. A 250 centimetre row of Brussels sprouts, at 30.48 centimetres, holds 8 seeds with 6.16 centimetres left over. The counts are the same either way.
Sowing distance and thinning
The seed distances for some crops are very small, such as 0.5 inches for tomatoes and 0.25 inches for artichokes, because they are sowing distances used before the plants are thinned or transplanted. The calculator therefore adds a note giving the transplant distance for the crop. Neither source gives a rule for how many extra seeds to sow, so the allowance for germination remains a simple estimate.
Limits of the estimate
The result counts positions along a row only. It does not give the area of the bed, the sowing depth, the dates or the weight of seed in a packet, and it does not allow for pests, weather or gaps. Seed packets often give a spacing for a specific variety, which should win over a table. Use the count to decide how many seeds to buy, and keep a few spare.
Common mistakes
- Forgetting that the count rounds down. A part of a space never holds a seed.
- Mixing seed and seedling distances. Choose the right count first.
- Entering the row length in the wrong unit. Check inches or centimetres.
- Ignoring germination. Old seed may need much more.
What next
Use this often? Add Vegetable Se to your Home screen.
Frequently asked questions
What is a vegetable seed calculator?
A tool that divides a row by the spacing of a crop to find how many seeds or seedlings fit, and with a germination rate, how many seeds to sow.
How many seeds fit in a row?
Divide the row length by the distance between seeds and round down. A 100 inch row at 12 inches holds 8.
Why does the count round down?
A part of a space cannot hold a seed, and the leftover is not carried over to the next row.
How do I allow for germination?
Divide the number of positions by the germination rate as a decimal and round up. 20 positions at 80 percent need 25 seeds.
Why can I not count celery seeds?
Celery, eggplant and peppers are listed with a seed distance of 0 because they are grown from transplants, so count seedlings.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.