A plant population calculator tells you how many plants or trees fit in a plot when you know the spacing between rows and between plants in a row. Enter the size of the plot and the two spacings, and it gives the number of plants, the density per acre or hectare, and the number to buy if some will not survive. It works for vegetable rows, orchards, tree plantings and flower beds.
How to use the plant population calculator
- Choose US or metric units.
- Enter the length and width of the plot, or its area.
- Enter the row spacing and the spacing within the row. Add an expected loss if you want to plant extra.
- Press Calculate.
The formula
Each plant needs a rectangle of ground equal to the row spacing times the spacing within the row. The number of plants is the area of the plot divided by that rectangle, rounded down. With rows 2 feet apart and plants 1 foot apart, each plant has 2 square feet, so a plot of 1,000 square feet holds 500 plants. The density follows from the size of an acre or a hectare. An acre is 43,560 square feet [1], so the same spacing gives 43,560 divided by 2, which is 21,780 plants per acre. A hectare is 10,000 square metres [2], so rows 0.5 metres apart with plants 0.25 metres apart give 80,000 plants per hectare. The plant counts themselves are our own arithmetic, since the pages we read give the sizes of the acre and hectare but no planting densities.
Trees and orchards
For trees planted on a square grid, give the same number for both spacings. At 20 feet by 20 feet each tree has 400 square feet, so an acre holds 43,560 divided by 400, which is 108.9 trees, and the calculator shows 108 whole trees on a plot of exactly one acre. For scale, a square acre is about 208.71 feet on each side [1]. That plot at 20 by 20 feet fits a grid of 10 trees by 10 trees, with a little ground to spare.
Row crops and gardens
Gardeners usually give spacing in inches, so convert to feet first: 6 inches is 0.5 feet and 18 inches is 1.5 feet. Carrots in rows 1 foot apart with plants 0.25 feet apart need 4 square feet for 16 plants in a single square foot of row, which this calculator handles as 1 by 0.25. Remember to subtract paths. A bed 4 feet wide with a 2 foot path beside it uses 6 feet of width for 4 feet of planting, so enter the planted area only.
Allowing for losses
Seedlings die, seeds fail to come up and some trees are lost to weather. Enter the percentage you expect to lose and the calculator divides the number you want to keep by what remains, rounding up. To keep 500 plants with 10 percent loss, buy 556, because 500 divided by 0.9 is 555.6. The loss figure is your own estimate and is not taken from the pages we read.
Square and offset layouts
The calculator uses rectangular spacing, where plants line up in both directions. Some growers stagger the rows so that each plant sits between two plants of the next row, which fits more plants into the same ground. That layout needs a different formula and is not included here, so treat the result as a safe lower figure for staggered plantings.
Units
Choose metric to enter metres and square metres. The results then show plants per hectare. The conversion between the units rests on the figures that one hectare is about 2.47105 acres [2] and that an international acre is 4,046.8564224 square metres [1]. If you mix feet and metres by mistake the answer will be wrong by a factor of about 10, so keep the unit choice in mind.
Worked examples
A plot of 100 by 50 feet is 5,000 square feet. With rows 3 feet apart and plants 1.5 feet apart, each plant has 4.5 square feet, giving 1,111 plants. A hedge of 60 metres with plants every 0.5 metres in two staggered lines is outside the calculator, but a single line is 120 plants. A field of 2 hectares at 0.75 by 0.2 metres holds 133,333 plants. These are our own calculations.
Choosing spacing
Spacing depends on the crop, the variety and how big the plant grows. Seed packets and nursery labels give the spacing that suits each plant, and extension services publish tables for vegetables and trees. Closer spacing gives more plants per acre but more competition for light, water and nutrients, and wider spacing gives bigger individual plants. Try several spacings in the calculator to see how the number of plants and the density change, then choose the one that fits your crop and your equipment.
Seed and seedling orders
Once you have the number of plants, you can plan purchases. Seedlings are bought one for one, so use the loss box to add extras. Seeds are different, because several seeds are sown for each plant and thinned later, so multiply by the seeds per hole and by a germination allowance from the packet. Nurseries often sell trees in lots, so round up to the lot size.
Common mistakes
- Forgetting the paths. Enter only the ground that is planted, not the whole garden.
- Mixing inches and feet. Convert both spacings to the same unit before you type them.
- Using the packet density for a different layout. A density quoted per acre assumes that spacing and no paths.
- Ignoring losses. Add a loss percentage if you expect plants to fail.
What next
Use this often? Add Plant Popula to your Home screen.
Frequently asked questions
What is a plant population calculator?
A tool that finds how many plants or trees fit in a plot from the area and the spacing between rows and between plants in a row.
How do I calculate plants per acre?
Divide 43,560 square feet by the area each plant needs, which is the row spacing times the plant spacing in feet. Rows 2 feet apart and plants 1 foot apart give 21,780.
How many trees fit in an acre at 20 by 20 feet?
About 108, because 43,560 divided by 400 is 108.9.
How do I allow for plants that die?
Divide the plants you want by one minus the loss rate and round up. For 500 plants at 10 percent loss, buy 556.
Does it work in metric units?
Yes. Choose metric, enter metres, and the density is shown per hectare of 10,000 square metres.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.