A tree value calculator puts a dollar figure on an ornamental tree with the trunk formula method. It multiplies the area of the trunk by a base value per square inch and by three ratings for the species, the condition and the location of the tree.
How to use the tree value calculator
- Choose US or metric units.
- Enter the trunk diameter or circumference at 4.5 feet, 1.3 metres.
- Enter the installed cost and caliper of a replacement tree.
- Enter the species, condition and location ratings and press Calculate.
The trunk formula method
The Kansas State University guide, Ornamental Tree Evaluation, gives the formula: the tree value is the base value times the cross-sectional area of the trunk times the species rating times the condition rating times the location rating [1]. A journal paper on formula methods describes the simplified Council of Tree and Landscape Appraisers form in the same way, with each rating between 0.0 and 1.0 [2].
Cross-sectional area
The area of the trunk is the diameter squared times 0.7854, which is pi divided by 4 [1]. If you enter the circumference, the tool divides it by 3.14 to get the diameter first. Metric inputs are divided by 2.54 so the work is done in inches, and the area is also shown in square centimetres. A 23-inch trunk has an area of 415.48 square inches.
The base value
The base value is the price per square inch of trunk, found from a replacement tree: its installed cost divided by the area of its trunk [1]. In the guide's example, a replacement tree with a 2-inch caliper costs $150. Its trunk area in Table 1 is 3 square inches, so the base value is $50 per square inch [1]. The replacement cost should come from a local grower or nursery, since prices vary by region.
Species, condition and location
The species rating reflects how well a species suits the area. The condition rating describes the health and structure of the tree, and the guide gives a range of 1 to 100 percent [1]. The location rating is the average of three scores, site, contribution and placement, with a range of 10 to 100 percent [1]. If you enter all three, the tool averages them. Species ratings are regional, so ask your local extension office.
First worked example
The guide values a sycamore with a trunk 23 inches across. The replacement tree costs $150 with a 2-inch caliper, so the base value is $50. The ratings are species 60 percent, condition 60 percent and location 70 percent. The value is $50 times 415.48 times 0.252, which the guide gives as about $5,235 [1]. The tool shows $5,235.01 because the guide rounds some intermediate figures, which adds a few cents.
Second worked example
The guide also values a sugar maple 10 inches across, with a replacement tree costing $250 and a species rating of 100 percent, a condition of 80 percent and a location of 70 percent. It rounds the base value up to $84 and the trunk area to 79 square inches, and gets $3,716.16 [1]. The option called round up to whole numbers does the same, so you see that exact figure.
Why there are three rounding choices
The guide rounds in two different ways in its two examples, so the tool lets you choose. The page style rounds only the area of the replacement trunk, as in the first example. Round up to whole numbers matches the second. No rounding is exact. For the sugar maple, the page style gives $3,665 and no rounding gives exactly $3,500, so the choice matters by a few percent.
Large trunks
The guide warns that for trunks of more than 30 inches in circumference, which is about 9.5 inches in diameter, the plain formula gives unrealistically high values, and it recommends the adjusted trunk area from the Guide for Plant Appraisal [1]. The page does not give that adjusted formula, so we cannot build it. The tool shows the warning for any large trunk, and the guide's own sycamore example uses 23 inches anyway.
Where the replacement cost comes from
The replacement cost is the installed price of a nursery tree of a common size, from a local grower. Use the caliper, which is the trunk diameter, of the tree that you price. In the guide's first example it is 2 inches. Prices vary with the species and the market, so get two quotes. The base value is only as good as this number.
What this value is for
The tool gives a planning figure, which is useful for comparing trees, for a conversation about replacing a tree or for a first look at what a mature tree is worth. It is not an appraisal for insurance, tax or a court, and the ratings are judgements. A certified arborist uses the full Guide for Plant Appraisal, which we did not read, and may reach a different value.
Using the site, contribution and placement scores
The location rating can be typed directly, or you can fill in the three optional boxes for site, contribution and placement. When all three are present, the tool averages them and uses that figure instead of the location box, and the result says so. If you fill in only one or two, the tool asks for the missing box, because the guide's average needs all three scores [1].
Common mistakes
- Using the nursery price of a mature tree. Use the price of a young replacement tree with its caliper.
- Entering ratings as decimals. Enter 60 for 60 percent.
- Mixing the units. Choose US or metric before you type the sizes.
- Valuing a very large trunk with this method. The guide says the plain formula is too high above about 9.5 inches across.
What next
Use this often? Add Tree Value to your Home screen.
Frequently asked questions
What is a tree value calculator?
A tool that estimates the dollar value of a tree with the trunk formula method, from the trunk area, a base value and three ratings.
What is the trunk formula method?
Value equals the base value times the trunk area times the species, condition and location ratings.
How do I find the base value?
Divide the installed cost of a replacement tree by the area of its trunk in square inches.
Is this a legal appraisal?
No. Insurance, tax and court work needs a certified arborist.
Why is the value too high for a big tree?
For trunks over about 9.5 inches across, the plain formula gives unrealistically high values, according to the Kansas State guide.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.