Saved

Press the star next to a tool's name to save it.

All my tools

Tree Height Calculator

Use this tree height calculator to find the height of a tree from the distance and the angles to its top and base, or with the stick method, and the diameter of its trunk from the circumference.

Restored your last values ·

Choose a method. With a clinometer, enter the distance to the tree and the angles to the top and base. With the stick method, enter the stick length and the two distances. To find the diameter, enter the circumference of the trunk.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose a method and enter the measurements, then press Calculate.

See full result

A tree height calculator works out how tall a tree is from the distance to it and the angles to its top and base, or from a simple stick held at arm's length. It also finds the diameter of the trunk from its circumference, which is how foresters record the size of a standing tree. Choose a method, enter your measurements and press the button.

How to use the tree height calculator

  1. Choose the method: clinometer angles, the stick method or the trunk circumference.
  2. Enter the distance and the angles, or the stick measurements, or the circumference.
  3. Choose US or metric units.
  4. Press Calculate.

Height with a clinometer

The page on tree height measurement describes the tangent method: multiply the horizontal distance from your eye to the tree by the tangent of the angle to the top, and you have the height of the top above eye level [1]. The base is then added if it is below eye level and subtracted if it is above [1]. Standing 50 feet away with an angle of 40 degrees to the top and minus 5 degrees to the base, the part above eye level is 50 times tan 40, which is 41.955 feet, and the part below is 4.374 feet, so the tree is 46.33 feet tall. Leave the base angle blank if your eyes are level with the base.

The stick method

In the stick method you hold a stick at arm's length so that the part above your hand has the same length as the distance from your hand to your eye, walk backwards until the stick masks the tree, and measure the distance to the base. The page gives the general formula as the length of the stick times the distance to the tree, divided by the distance to the eye [1]. A stick of 0.5 metres, held 0.6 metres from the eye, with the tree 40 metres away gives a height of 0.5 times 40 divided by 0.6, which is 33.3 metres. The standard version of the method makes the stick length equal to the distance to the eye, so the height equals the distance to the tree.

Errors to avoid

Distance must be measured level, not along a slope. The page shows how serious an error in distance can be: at 64 degrees, an offset of 8.3 feet makes the height too high by 17 feet [1]. Stand where you can see both the top and the base, and avoid trees that lean toward or away from you. Height is the vertical distance between the base of the tree and the tip of the highest branch [1], so measure to the highest tip, which on a round crown is not always directly above the trunk.

Diameter and circumference

The diameter of a trunk is its circumference divided by pi. For a circumference of 94.25 inches, the diameter is 30 inches. Foresters use a girth tape that is marked in units of pi, so that the tape reads the diameter directly [2]. The calculator also gives the radius and the area of the cross-section, which is pi times the radius squared.

Where to measure

Diameter at breast height is the standard way of recording the size of a standing tree [2]. In many countries it is measured at about 1.3 metres, which is 4.3 feet, above the ground, and in the United States at 4.5 feet, which is 1.37 metres [2]. On a slope, the reference is usually the highest point on the ground that touches the trunk [2], and if the trunk swells at that height you measure below the swelling, where the diameter is smallest [2]. The calculator reminds you of the height that matches your unit choice.

Worked examples

A tree 30 metres away with an angle of 45 degrees to the top and none to the base is 30 metres tall. A hedge of 12 feet viewed from 20 feet away at about 31 degrees fits the tangent method as well. A trunk with a circumference of 100 centimetres has a diameter of 31.8 centimetres. These are our own calculations.

Using the result

Height and diameter are the first two numbers in estimating the volume of timber in a tree, in checking whether a tree is near a building or a line, and in recording the growth of a tree year by year. Repeat the measurement from two places and average the results to reduce the error.

Choosing a method

A clinometer is the most accurate tool for a tall tree, because it measures angles directly, and it works at any distance that gives a clear view of the top. The stick method needs no equipment at all and is handy for a quick estimate or for teaching, but it is less exact because it depends on how still you can hold the stick. A girth tape is the quickest way to record the size of many trees in a stand. Many people use two methods on the same tree to check each other.

Practical tips

Pick a spot at about the height of the tree away from the trunk, so that the angle to the top is not too steep. Very steep angles make the answer sensitive to small errors in the angle. Mark the spot, measure the distance with a tape, and take each angle twice. If the ground rises or falls, measure the angle to the base as well and enter it with its sign. Write down the date and the method so that you can compare the measurement with later ones.

Common mistakes

  • Measuring along the slope. Use the horizontal distance.
  • Forgetting the base. If the base is below eye level, enter a negative angle.
  • Using the wrong height for the trunk. Measure the circumference at breast height.
  • Mixing units. Enter feet with feet and metres with metres.

What next

Use this often? Add Tree Height to your Home screen.

Frequently asked questions

What is a tree height calculator?

A tool that finds the height of a tree from the distance to it and the angles to its top and base, or by the stick method, and the diameter from the circumference.

How do I measure tree height with a clinometer?

Multiply the horizontal distance to the tree by the tangent of the angle to the top, then add the part below eye level or subtract the part above it.

How does the stick method work?

Height equals the stick length times the distance to the tree, divided by the distance from the eye to the stick.

How do I find tree diameter from circumference?

Divide the circumference by pi. A circumference of 94.25 inches is a diameter of 30 inches.

Where is diameter at breast height measured?

About 1.3 metres (4.3 feet) above the ground in many countries, and 4.5 feet (1.37 metres) in the United States.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools