Saved

Press the star next to a tool's name to save it.

All my tools

Basal Area Calculator

Use this basal area calculator to find the cross-sectional area of a tree at breast height and the basal area of a stand per acre or hectare from DBH values or a prism count.

Restored your last values ·

Choose one tree, a plot of trees or a prism count. For a tree, enter its diameter at breast height. For a plot, list the diameters and the plot area. For a prism count, enter the basal area factor and the number of trees counted.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what to work out, fill in the boxes, then press Calculate.

A basal area calculator finds the cross-sectional area of a tree trunk at breast height and the total basal area of a stand per acre or hectare. Enter the diameter at breast height (DBH) of one tree, the diameters of all trees in a plot with the plot area, or a prism count with its basal area factor.

How to use the basal area calculator

  1. Choose US or metric units, and choose one tree, stand from diameters or stand from a prism count.
  2. Enter the DBH, the list of DBH values with the plot area, or the BAF and number of trees counted.
  3. Press Calculate.

What basal area is

The Wikipedia article on basal area defines it as the cross-sectional area of trees at breast height, which it gives as 1.3 m or 4.5 ft above the ground.[1] The diameter at breast height, DBH, is the diameter of the trunk measured at that height.[1] Foresters use the stand total as a measure of how densely a stand is stocked.

Basal area of one tree

The page gives BA = π × (DBH ÷ 2) squared, and writes the unit conversions: dividing by 10,000 for centimetres to square metres, and by 144 for inches to square feet.[1] It also gives the simplified forms BA in square feet = 0.005454 × DBH in inches squared, and BA in square metres = 0.00007854 × DBH in centimetres squared.[1] A 12 inch tree has a basal area of 0.005454 × 144 = 0.785 square feet. A 30 centimetre tree has 0.00007854 × 900 = 0.0707 square metres. The calculator shows both the simplified constant and the exact formula.

Stand basal area from a plot

The page describes finding the basal area of a stand by adding the basal areas of all of the trees in an area and dividing by the area of the land, and expresses it in square metres per hectare or square feet per acre.[1] List the DBH of every tree on the plot and enter the plot area. For trees of 10, 12 and 14 inches on 0.1 acre, the total is 0.005454 × (100 + 144 + 196) = 2.39976 square feet, which on 0.1 acre is 23.9976 square feet per acre, with 30 trees per acre. The tree count per area is our own addition.

Stand basal area from a prism

The page says a wedge prism can be used to quickly estimate basal area per hectare, and that all trees that appear in line with the standing tree on the outside of the prism, viewed from the plot centre, are counted as in.[1] It says to multiply the basal area factor by the number of in trees in the variable radius plot, and lists 5, 8 and 10 as common basal area factors.[1] The page marks that sentence as needing a citation, so check the rules for your own prism and country. The calculator gives BAF × count: 12 trees with a BAF of 10 is 120 square feet per acre in US units. We did not use the worked example on the page, because its units look inconsistent with its own formula.

Why breast height

Measuring at a fixed height gives comparable diameters from tree to tree and avoids the swelling at the base of the trunk. The two heights on the page, 1.3 m and 4.5 ft, are not identical, since 4.5 ft is 1.37 m. The page itself uses the two numbers in different places, with a rounded alternative of 1.4 m in its introduction, so follow the convention of your own survey method.[1]

Reading the result

The calculator gives the total basal area in square feet per acre or square metres per hectare. A higher value means more wood cross-section per unit of land and a more crowded stand. The page gives no typical stand values, so compare your figure with guidance for your forest type and region.[1]

Worked examples

An 18 inch tree has a basal area of 0.005454 × 324 = 1.767 square feet. A plot of 0.25 acre with tree diameters of 8, 10, 12 and 16 inches has a total of 0.005454 × (64 + 100 + 144 + 256) = 3.0761 square feet, or 12.3 square feet per acre. A metric plot of 0.05 ha with 30 and 40 cm trees has 0.00007854 × (900 + 1,600) = 0.19635 square metres, or 3.93 square metres per ha. These are our own examples from the formulas.

Using basal area in practice

Foresters compare the basal area of a stand with a target for its species and age to decide whether it needs thinning. A stand that is too dense can grow slowly because the trees compete for light, water and nutrients. The calculator only reports the number, and the target depends on local guidance. Check that you are comparing the same units, since a value in square feet per acre is not the same as one in square metres per hectare.

Converting between the two systems

One square foot per acre is about 0.2296 square metres per hectare, so 100 square feet per acre is about 23 square metres per hectare. This conversion is our own arithmetic from the definitions of the foot, the acre and the hectare. The calculator does not convert one into the other; switch the units selector and enter the diameters in centimetres to see the metric answer.

Common mistakes

  • Using the radius as the diameter. The formula expects the full DBH.
  • Mixing units. Use inches with acres and centimetres with hectares.
  • Forgetting to divide by the plot area. The total of a plot is not the stand value per acre.

What next

Use this often? Add Basal Area to your Home screen.

Frequently asked questions

What is a basal area calculator?

A tool for foresters that finds the cross-sectional area of a tree trunk at breast height and the total basal area of a stand per acre or hectare.

What is the formula for basal area?

BA = π × (DBH ÷ 2) squared. In US units BA in square feet is 0.005454 × DBH in inches squared, and in metric BA in square metres is 0.00007854 × DBH in centimetres squared.

How do I find the basal area per acre?

Add the basal areas of all the trees on a plot and divide by the plot area in acres.

What is breast height?

1.3 m or 4.5 ft above the ground, where DBH is measured.

How does a prism count work?

Multiply the basal area factor of the prism by the number of trees counted as in from the plot centre.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters