A circle calculator finds all the measures of a circle from one of them. Enter the radius, the diameter, the circumference or the area, and the calculator gives the other three. If you add a central angle, it also gives the arc length, the area of the sector, the length of the chord, the area of the segment and the perimeter of the sector. It uses the formulas on Wikipedia's pages on the circle and the circular sector, and it works in your browser. It covers the circumference, the diameter and the radius conversions, the arc length and the chord length.
How to use the circle calculator
- Choose what you know: the radius, the diameter, the circumference or the area.
- Enter its value.
- If you want the arc, the sector and the chord, enter a central angle in degrees.
- Press Work out the circle.
Radius, diameter, circumference and area
The Wikipedia page on the circle gives the circumference as 2 times pi times the radius and the area as pi times the radius squared. The diameter is twice the radius. From these relations you can go in any direction. The radius is half the diameter, the circumference divided by 2 pi, or the square root of the area divided by pi. The circumference divided by the diameter is always pi, which is the reason why the conversions from circumference to diameter and from circumference to radius are so simple. For a circle with a radius of 5, the diameter is 10, the circumference is about 31.416 and the area is about 78.540.
Arc length
An arc is a part of the circumference. The Wikipedia page on the circular sector gives the arc length as the radius times the central angle in radians, and in degrees as 2 pi times the radius times the angle divided by 360. For a radius of 5 and an angle of 60 degrees, which is pi over 3 radians, the arc length is 5 times pi over 3, which is about 5.236. The calculator converts the angle for you.
Sector area and sector perimeter
A sector is the slice that is cut by two radii, like a slice of a pie. Its area is half the radius squared times the angle in radians, or pi times the radius squared times the angle in degrees divided by 360. In the example it is about 13.090. The perimeter of the sector is the arc plus the two radii, which the page gives as the radius times the sum of the angle and 2, and which is about 15.236 here.
Chord length
A chord is a straight line that joins two points on the circle. The page gives its length as 2 times the radius times the sine of half the central angle. For an angle of 60 degrees the chord is equal to the radius, so with a radius of 5 the chord is 5, since the two radii and the chord make an equilateral triangle. A chord through the center, with an angle of 180 degrees, is the diameter.
Segment area
The segment is the part of the circle between a chord and its arc. The area of the segment is the area of the sector minus the area of the triangle that is made by the two radii and the chord. In terms of the angle in radians, it is half the radius squared times the angle minus the sine of the angle. The Wikipedia page does not state this formula, so it is a standard relation that the calculator uses. For the example it gives about 2.265.
Circle formulas and units
All lengths use the same unit, and the areas use that unit squared. The value of pi is built in. If you need the equation of a circle in coordinates, use the circle equation calculator on this site, and if you need an oval shape, use the ellipse calculator. For the area of a ring, the area of the outer circle minus the area of the inner circle gives the answer.
Worked examples
Suppose a pizza has a diameter of 14 inches. The radius is 7 inches, the circumference is about 43.98 inches and the area is about 153.94 square inches. A slice that is one eighth of the pizza has a central angle of 45 degrees, an arc length of about 5.50 inches, and a sector area of about 19.24 square inches. Now start from the circumference instead: a round table with a circumference of 6 meters has a radius of about 0.955 meters and a diameter of about 1.91 meters. The calculator gives these values at once, in whichever order you know them.
Where circle measures are used
Circle measures appear in daily life and in work. A carpenter needs the circumference to length a strip for a round table, a gardener needs the area for a round bed, and an engineer needs the arc length of a curved pipe. In schools, the topic comes with the study of pi and the unit circle, and the calculator can be used to check the work.
Common mistakes
- Mixing up the radius and the diameter. The diameter is twice the radius.
- Using radians for the angle. Enter degrees.
- Forgetting the units of area. They are squared.
- Rounding pi too early. Use the full value until the end.
What next
Use this often? Add Circle to your Home screen.
Frequently asked questions
What is a circle calculator?
A tool that finds the radius, diameter, circumference and area of a circle from any one of them, and the arc, sector and chord from an angle.
How do you find the circumference from the diameter?
Multiply the diameter by pi. The circumference is also 2 × pi × radius.
What is the arc length formula?
Arc length = radius × central angle in radians, or 2πr × angle ÷ 360 for an angle in degrees.
How is the chord length found?
Chord = 2 × radius × sin(angle ÷ 2). For 60 degrees the chord equals the radius.
What is the area of a sector?
Half the radius squared times the angle in radians, or πr² × angle ÷ 360 for degrees.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.