Saved

Press the star next to a tool's name to save it.

All my tools

Annulus (Ring) Area Calculator

This annulus area calculator finds the area of a flat ring from two radii, two diameters, or the outer radius and width, in US or metric units, with circumferences too.

Restored your last values ·

An annulus is the flat ring between two circles with the same center, like a washer. Enter both sizes in the same unit.

Everything is worked out in your browser. Nothing you type is sent anywhere.

Area of the ring

–

Enter the outer and inner sizes.

See full result

An annulus area calculator finds the area of a flat ring: the space between two circles that share the same center, like a washer, a round frame or a path around a pond. Enter the outer and inner radius, the two diameters, or the outer radius and the width of the ring. This annulus area calculator uses A = π(R² − r²) to give the area in square inches, feet or yards, or in metric units, along with the circumferences, the ring width and the longest straight line that fits inside it.

How to use the annulus area calculator

  1. Choose US or Metric units. US is the default, with inches selected.
  2. Choose what you know: two radii, two diameters, or the outer radius and the ring's width.
  3. Enter the two values in the same unit and pick that unit.
  4. Press Calculate. The ring's area appears with the other figures below it.
  5. Press Reset to start again.

The annulus area formula

In mathematics, an annulus is the region between two concentric circles. The word comes from the Latin for little ring. Its area is the area of the big circle minus the area of the hole:

A = πR² − πr² = π(R² − r²) = π(R + r)(R − r)

Here R is the outer radius and r is the inner radius. The last form is handy for a thin ring: R + r is twice the middle radius and R − r is the width, so the area is the middle circumference multiplied by the width.

The chord shortcut

The longest straight line you can draw inside a ring just touches the inner circle. Call half of that line d. Because d and r form a right-angled triangle with R as the hypotenuse, d² = R² − r², and so the area is simply A = πd². That means two rings with the same longest chord have the same area, whatever their actual sizes. The calculator shows this chord, 2d, in the results.

Worked example

A washer has an outer radius of 5 inches and a hole with a radius of 3 inches.

  • Outer circle: π × 5² = 78.54 square inches
  • Hole: π × 3² = 28.274 square inches
  • Ring: π × (25 − 9) = 16π = 50.265 square inches

The ring is 2 inches wide and covers 64% of the outer circle. The longest straight line inside it is 2 × √(25 − 9) = 8 inches, and π × 4² gives the same 50.265 square inches. Entered as diameters of 10 and 6 inches, or as an outer radius of 5 with a width of 2, the answer is the same.

Where ring areas come up

  • Garden paths and borders. A gravel path around a round pond or a tree is an annulus, and its area tells you how much gravel, paving or edging to buy.
  • Pipes and tubes. The cross-section of a pipe wall is a ring, and its area, multiplied by the length, gives the volume of material.
  • Washers, gaskets and seals. The flat face that carries the load is an annulus.
  • Round frames and mats. The border around a circular mirror or picture is a ring.
  • Running tracks and roundabouts are close to rings too, at least in their curved parts.

Radii, diameters or width?

Use whatever is easiest to measure. A diameter is usually easier to measure across an object than a radius from an unknown center, so the diameter option halves both values for you. The width option is useful for paths and borders, where you know the size of the inner circle's outside edge and how wide the ring is. Whatever you enter, the outer size must be larger than the inner one, and the width can't be more than the outer radius.

Units and conversions

The area comes out in square units of the length you entered, so inches give square inches and centimeters give square centimeters. In US mode the results also show the area in square feet, and in metric mode in square meters, which helps when you're buying materials. Remember that areas scale with the square: a ring measured in feet has 144 times fewer square units than the same ring in inches.

Annulus sectors

Only part of a ring, such as a curved strip of a path, is called an annulus sector. Its area is θ ÷ 2 × (R² − r²) with the angle θ in radians, which is the same as the full ring's area multiplied by the fraction of a full turn. For a quarter of a ring, simply divide the result here by 4.

Checking your answer

A quick way to check a result is to compare it with the outer circle. The ring can never be bigger than the outer circle, and the calculator shows what share of it the ring covers. A thin ring covers only a small share, while a ring with a tiny hole covers almost all of it. For the washer above, the hole takes 36% of the outer circle, so the ring takes the other 64%. If your own figure for the ring is larger than the outer circle's area, a radius and a diameter have probably been mixed up.

Common mistakes

  • Mixing radius and diameter. Using a diameter as a radius makes the area four times too big.
  • Subtracting the radii first. π(R − r)² is not the ring's area; square each radius first.
  • Mixing units. Enter both sizes in the same unit.
  • Forgetting the hole. The area of the outer circle alone includes the middle.

What next

Use this often? Add Annulus (Rin to your Home screen.

Frequently asked questions

What formula does the annulus area calculator use?

It uses A = π(R² − r²), where R is the outer radius and r is the inner radius: the area of the big circle minus the area of the hole.

How do I find the area of a ring from diameters?

Halve both diameters to get the radii, then use π(R² − r²). Choose Two diameters and the calculator does this for you.

What is the area of a ring with radii 5 and 3?

π × (25 − 9) = 16π, about 50.265 square units.

Can I work out the area from the chord?

Yes. If the longest straight line inside the ring is 2d, the area is πd², because d² equals R² − r².

Does it work in metric units?

Yes. Switch to Metric to enter millimeters, centimeters or meters. US units are the default.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Math Tools