Saved

Press the star next to a tool's name to save it.

All my tools

Torus Volume Calculator

This torus volume calculator finds the volume, surface area and capacity of a torus from its major and tube radius, or from its inner and outer radius, in US or metric units.

Restored your last values ·

The major radius runs from the center of the hole to the center of the tube. The tube radius is the radius of the tube itself. The inner radius is the hole's radius and the outer radius reaches the outside edge.

Everything is worked out in your browser. Nothing you type is sent anywhere.

Volume of the torus

–

Enter the two radii.

See full result

A torus volume calculator works out the volume and surface area of a torus, the donut or ring shape. Enter the major radius and the tube radius, or the inner and outer radius if that's what you can measure, and this torus volume calculator gives the volume, the surface area, how much it would hold in gallons and liters, and the hole size and overall width. US units are the default, with metric a click away.

What is a torus?

A torus is the shape of a donut, an inner tube, an O-ring or a bagel. Wolfram MathWorld describes the ordinary torus as a surface with a single hole, and notes that the ring torus was once called an anchor ring. It's made by sweeping a circle around a line in the same plane that doesn't cross the circle. Two measurements describe it:

  • Major radius (R): the distance from the center of the hole to the center of the tube.
  • Tube radius (r): the radius of the circular tube, sometimes called the minor radius.

When R is larger than r you get a ring torus, the usual donut shape. When they're equal, the hole closes to a point, called a horn torus. If r were larger than R, the tube would pass through itself, so this calculator asks for a tube radius no bigger than the major radius.

Torus volume and surface area formulas

MathWorld gives the volume from Pappus's centroid theorem: the area of the tube's circle, πr², multiplied by the distance its center travels, 2πR. That gives:

  • Volume = 2π²Rr²
  • Surface area = 4π²Rr

The surface area works the same way: the circumference of the tube, 2πr, times 2πR. If you know the inner radius (the hole) and the outer radius (to the outside edge), R is their average and r is half their difference:

  • R = (outer + inner) ÷ 2
  • r = (outer − inner) ÷ 2

Worked example

A ring has a major radius of 4 inches and a tube radius of 1.5 inches.

  • Volume = 2 × π² × 4 × 1.5² = about 177.65 cubic inches.
  • Surface area = 4 × π² × 4 × 1.5 = about 236.87 square inches.
  • That volume holds about 0.769 US gallons, or about 2.911 liters.
  • The inner radius is 4 − 1.5 = 2.5 inches, so the hole is 5 inches across, and the outer radius is 5.5 inches, so the ring is 11 inches wide.

Entering an inner radius of 2.5 and an outer radius of 5.5 gives the same result.

How to use the torus volume calculator

  1. Choose US or metric units, then pick the unit you measured in.
  2. Choose what you know: the major and tube radius, or the inner and outer radius.
  3. Enter the two measurements.
  4. Press Calculate to see the volume, surface area, capacity and dimensions.

Measuring a real ring

For an inner tube, a pool float or a ring cake pan, it's usually easiest to measure across the hole and across the outside. Halve each to get the inner and outer radius. For a tube with a round cross-section, the tube radius is half its thickness. Measure in the middle of the tube rather than at a seam or valve.

Where torus calculations are used

  • Estimating how much air or water an inner tube or pool ring holds.
  • Working out the volume of rubber in an O-ring or gasket.
  • Sizing ring-shaped cake pans and molds.
  • Calculating material for toroidal tanks, coils and pipes bent into a ring.
  • Geometry homework on solids of revolution.

Torus volume and capacity

The capacity shown assumes the full volume of the torus is hollow and can be filled. For a real tube with thick walls, measure the inside of the tube for the tube radius to estimate what it holds. For a solid ring, such as a rubber O-ring, the volume is the amount of material.

Ring, horn and spindle tori

MathWorld describes three standard tori, depending on how the tube radius compares with the major radius. With r smaller than R you get the ring torus, the familiar donut with a hole in the middle. With r equal to R the hole shrinks to a single point and the torus touches itself at the center; this is the horn torus. With r larger than R the tube would overlap itself, giving a self-intersecting spindle torus. When no type is specified, a torus means a ring torus, which is what this calculator handles. A horn torus, with r equal to R, also works and shows a hole diameter of 0.

Why the formula works

Pappus's centroid theorem says that when a flat shape is spun around an axis, the volume it sweeps out equals the shape's area times the distance its center travels. For a torus, the shape is the tube's circle, with area πr², and its center travels around a circle of radius R, a distance of 2πR. Multiplying gives 2π²Rr². The same idea for the circle's outline, which has length 2πr, gives the surface area 4π²Rr. This means a torus has the same volume as a cylinder of radius r and length 2πR: imagine cutting the ring and straightening it out.

Units and capacity

The volume is shown in cubic units of whatever length you entered: cubic inches, cubic feet, cubic centimeters and so on. In US mode the capacity is shown in US gallons first, then liters; in metric mode it's liters first. One US gallon is 231 cubic inches, so you can check a result in inches by dividing the volume by 231. The surface area is in square units, which is useful for estimating paint, fabric or coating for a ring-shaped object.

Common mistakes

  • Using diameters as radii. Halve any measurement taken straight across.
  • Mixing up R and r. R is to the center of the tube, not the outside edge.
  • Using the outer radius as R. That overstates the volume.
  • Mixing units. Measure both radii in the same unit.

What next

Use this often? Add Torus Volume to your Home screen.

Frequently asked questions

How does the torus volume calculator work?

It uses Volume = 2π²Rr² and Surface area = 4π²Rr, where R is the major radius and r the tube radius, and also accepts inner and outer radii.

What is the formula for the volume of a torus?

Volume = 2π²Rr², which is the tube's cross-section area πr² times the distance around its center line, 2πR.

What is the surface area of a torus?

Surface area = 4π²Rr, the tube's circumference 2πr times 2πR.

How do I find R and r from the inner and outer radius?

R is the average of the two, (outer + inner) ÷ 2, and r is half the difference, (outer − inner) ÷ 2.

Can the tube radius be bigger than the major radius?

Not for a ring torus. If r is larger than R, the tube passes through itself, so the calculator asks for r no bigger than R.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Math Tools