Saved

Press the star next to a tool's name to save it.

All my tools

Frustum Volume Calculator

This frustum volume calculator finds the volume of a cone or pyramid with its top cut off from the two end sizes and the height, with capacity in gallons and liters and the surface areas.

Restored your last values ·

The height is measured straight up between the two flat ends, not along the slope. Enter 0 for the small end to get a full cone or pyramid.

Everything is worked out in your browser. Nothing you type is sent anywhere.

Volume of the frustum

–

Enter both end sizes and the height.

See full result

A frustum volume calculator works out the volume of a cone or pyramid with its top cut off, the shape of a bucket, a flower pot, a lampshade, a funnel or a tapered planter. Enter the sizes of the two flat ends and the height between them, and this frustum volume calculator gives the volume in cubic units, how much it holds in gallons and liters, and the slant height and surface areas. Choose a round frustum for cones or a square one for pyramids. US units are the default, with a metric option.

What a frustum is

A frustum is the part of a solid left between two parallel planes that cut it. Slice the point off a cone, parallel to its base, and you get a conical frustum with two circular ends of different sizes. Do the same to a square pyramid and you get a square frustum with two square ends. The ends are parallel, and the height is the straight distance between them.

The frustum volume formula

For any frustum with end areas A₁ and A₂ and height h:

V = h ÷ 3 × (A₁ + A₂ + √(A₁ × A₂))

For a round frustum with end radii R and r, the end areas are πR² and πr², and the formula becomes V = π × h ÷ 3 × (R² + R × r + r²). For a square frustum with end sides a and b, it's V = h ÷ 3 × (a² + a × b + b²). If the small end is 0, the formulas reduce to the usual cone and pyramid volumes, one third of the base area times the height.

Slant height and surface area

The slant height runs along the side from one rim to the other. For a round frustum it's √(h² + (R − r)²), and the side surface area is π × (R + r) × slant height. For a square frustum, the calculator uses the slant height up the middle of each face, √(h² + ((a − b) ÷ 2)²), and the four trapezoid faces have an area of 2 × (a + b) × that slant height. The total surface area adds both flat ends.

Worked example: a bucket

A bucket is 12 inches across the top, 8 inches across the bottom and 9 inches deep. Choose Round and Diameters, and enter 12, 8 and 9. The radii are 6 and 4 inches.

  1. R² + R × r + r² = 36 + 24 + 16 = 76.
  2. V = π × 9 ÷ 3 × 76 = 228π ≈ 716.28 cubic inches.
  3. In US gallons: 716.28 ÷ 231 ≈ 3.10 gallons.
  4. Slant height: √(9² + 2²) ≈ 9.22 inches.
  5. Side surface: π × (6 + 4) × 9.22 ≈ 289.64 square inches.

So the bucket holds a little over 3 gallons when full to the brim.

Worked example: a square planter

A tapered planter has a 10 inch square top, a 4 inch square base and is 6 inches tall. V = 6 ÷ 3 × (100 + 40 + 16) = 312 cubic inches, or about 1.35 gallons of potting mix. The slant height up each face is √(6² + 3²) ≈ 6.71 inches, and the four sides together have an area of about 187.83 square inches.

How to use the frustum volume calculator

  1. Choose your units and the unit of length.
  2. Choose the shape: round for cone-like objects, square for pyramid-like ones.
  3. For a round frustum, say whether you measured radii or diameters.
  4. Enter the large end, the small end and the height. It doesn't matter which end is on top.
  5. Press Calculate.

Where frustums show up

Buckets, cups, flower pots, lampshades, funnels, hoppers, chimney caps, concrete footings with sloped sides and many food containers are frustums or close to them. Engineers use the same formula for tapered tanks, and gardeners use it to work out how much soil a pot needs.

Where the formula comes from

Imagine the frustum as a full cone with a smaller cone removed from its tip. Its volume is the big cone's volume minus the small cone's. Working that out with the two radii and the height between the cuts gives the frustum formula directly. Another way to see it: slice the frustum into thin discs, each with a radius that changes evenly from R at the bottom to r at the top, and add up their volumes. Both routes lead to π × h ÷ 3 × (R² + R × r + r²).

The middle term, R × r, is what makes the frustum formula different from simply averaging the two ends. For a bucket whose ends are very different in size, averaging the two areas and multiplying by the height overestimates the volume, sometimes by quite a lot.

Measuring a real object

Measure inside diameters for capacity: across the top rim and across the bottom. For the height, stand a ruler straight up from the bottom, or lay a straight edge across the rim and measure down to the floor of the container. If a container has a rounded bottom or a lip, treat the result as an estimate. For volumes in liters, choose Metric and centimeters, and the calculator divides the cubic centimeters by 1,000.

Units

The volume is in the cube of the unit you chose, so inches give cubic inches and centimeters give cubic centimeters. The calculator also converts the volume to US gallons, using 231 cubic inches to the gallon, and to liters, so you can compare it with the size printed on a container or the bag of soil you're buying.

Common mistakes

  • Using the slant height as the height. The height is measured straight between the ends.
  • Mixing radius and diameter. A diameter is twice the radius.
  • Averaging the two ends. The average of the areas times the height overestimates the volume; use the frustum formula.
  • Measuring the outside. For capacity, use inside sizes.

What next

Use this often? Add Frustum Volu to your Home screen.

Frequently asked questions

How does the frustum volume calculator work?

It uses V = h ÷ 3 × (A₁ + A₂ + √(A₁A₂)), where A₁ and A₂ are the areas of the two ends and h is the height between them.

What is the formula for the volume of a conical frustum?

V = π × h ÷ 3 × (R² + R × r + r²), where R and r are the radii of the two ends.

How many gallons does a bucket hold?

Measure the top and bottom diameters and the depth. A bucket 12 in across the top, 8 in at the bottom and 9 in deep holds about 3.1 US gallons.

Is the height the same as the slant height?

No. The height is the straight distance between the two ends; the slant height runs along the sloping side.

Can it do a square frustum?

Yes. Choose Square and enter the side lengths of the two square ends.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Math Tools