A hemisphere volume calculator works out how much space half a sphere takes up, such as a dome, a mixing bowl, a round planter or a half-ball tank. Enter the radius or the diameter and pick a unit, and this hemisphere volume calculator gives the volume in cubic units, how much it holds in gallons and liters, and the curved, flat and total surface areas. US units (inches, feet and yards) are the default, and you can switch to millimeters, centimeters and meters.
The hemisphere volume formula
A hemisphere is half of a sphere, cut by a flat plane through its center. Its volume is half of a sphere's volume:
V = ⅔ × π × r³
where r is the radius, the distance from the center of the flat face to its edge. If you know the diameter d, the radius is d ÷ 2. Because the radius is cubed, a hemisphere twice as wide holds eight times as much.
Surface area of a hemisphere
- Curved surface: 2 × π × r², half of a sphere's 4πr².
- Flat base: π × r², the area of the circle where it was cut.
- Total surface: 3 × π × r², the curved part plus the base.
- Rim circumference: 2 × π × r.
Use the curved area for paint or fabric on a dome with no floor, and the total area for a closed solid half-ball. The calculator also gives the center of mass of a solid hemisphere, which sits ⅜ of the radius above the flat face.
Worked example: a 12 inch bowl
A round bowl is 12 inches across the top, so its radius is 6 inches. Treating it as a hemisphere:
- r³ = 6 × 6 × 6 = 216.
- V = ⅔ × π × 216 = 144π ≈ 452.39 cubic inches.
- In liters: 452.39 × 0.016387 ≈ 7.41 liters.
- In US gallons: 7.41 ÷ 3.785 ≈ 1.96 gallons.
- Curved surface: 2 × π × 36 ≈ 226.19 square inches.
So the bowl holds just under 2 gallons when filled to the brim. Real bowls have thick walls and are rarely perfect half-spheres, so measure the inside diameter for capacity.
Worked example in metric
A concrete dome planter has an inside radius of 15 cm. Its volume is ⅔ × π × 15³ ≈ 7,068.58 cubic centimeters, which is about 7.07 liters of soil. The total surface area is 3 × π × 15² ≈ 2,120.58 square centimeters.
Working backward from a volume
If you know how much a hemisphere must hold, you can find the radius you need: r = ∛(3V ÷ 2π). For example, a dome that holds 1,000 cubic inches needs a radius of about 7.82 inches, or a diameter of about 15.6 inches.
Where hemispheres show up
Many everyday objects are close to half a sphere: salad and mixing bowls, igloos and domed tents, the tops of tanks and silos, bird baths, half-ball molds for baking or bath bombs, and observatory domes. For a full ball, use a sphere calculator; for a tank with a hemisphere on each end, work out the cylinder and add a full sphere for the two ends together.
Units and conversions
The volume comes out in the cube of the unit you entered: cubic inches for inches, cubic feet for feet and so on. The calculator converts it to US gallons and liters too. One US gallon is exactly 231 cubic inches, and one liter is 1,000 cubic centimeters, so a result in cubic centimeters divided by 1,000 gives liters.
How to use the hemisphere volume calculator
- Choose your units. US is the default, with inches, feet or yards. Switch to Metric for millimeters, centimeters or meters.
- Say what you measured. Pick Radius if you measured from the center of the flat face to the edge, or Diameter if you measured straight across it.
- Type the measurement and pick its unit.
- Press Calculate. The volume appears at the top, with the capacity, the three surface areas, the rim circumference and the center of mass below it.
- Copy or share the result if you need it later.
You can change the unit after calculating and press Calculate again to see the same shape in a different unit. The numbers you type are worked out in your browser and aren't sent anywhere.
Measuring a real dome or bowl
The hardest part is usually getting a good radius. For a bowl, lay a straight edge across the top and measure the inside width from rim to rim, then halve it. For a dome on the ground, measure the distance around its base with a tape and divide by 2π (about 6.283) to get the radius. If the shape is taller or flatter than half a sphere, its height won't match its radius, and the hemisphere formula will only be an estimate. In that case, a spherical cap formula fits better.
Check your answer by comparing the height with the radius. In a true hemisphere they're the same, so a bowl 12 inches across should be about 6 inches deep.
Common mistakes
- Using the diameter as the radius. That makes the volume eight times too big. Choose Diameter if you measured across.
- Forgetting to cube. The radius is multiplied by itself three times.
- Using the full sphere formula. A hemisphere is half of 4/3 πr³.
- Measuring the outside of a bowl. For how much it holds, use the inside size.
What next
Use this often? Add Hemisphere V to your Home screen.
Frequently asked questions
How does the hemisphere volume calculator work?
It uses V = ⅔ × π × r³, where r is the radius. If you enter the diameter, it halves it first, then also gives the surface areas and capacity.
What is the formula for the volume of a hemisphere?
Volume = ⅔ × π × r³, which is half the volume of a sphere with the same radius.
What is the surface area of a hemisphere?
The curved surface is 2πr², the flat base is πr², and the total is 3πr².
How many gallons does a hemisphere hold?
Work out the volume in cubic inches and divide by 231. A hemisphere with a 6 inch radius holds about 1.96 US gallons.
Can I enter the diameter?
Yes. Choose Diameter and the calculator halves it to get the radius.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.