Saved

Press the star next to a tool's name to save it.

All my tools

Thinset Calculator

Enter the area you are tiling and choose the trowel notch. The thinset calculator uses manufacturer coverage per 50 lb bag to work out how many bags of thinset mortar to buy, with a waste allowance.

Restored your last values ·

Bigger tiles usually need bigger notches.

Coverage per 50 lb (22.68 kg) bag from CUSTOM’s VersaBond chart. Bags use the lower coverage figure.

Bags of thinset (50 lb)

–

Enter the area you are tiling.

See full result

The thinset calculator works out how much thinset mortar to buy for a tile job. Enter the area you are tiling and choose the trowel notch you will use, and it divides the area by the coverage of one 50 lb bag for that trowel, adds a waste allowance and rounds up to whole bags. For example, 100 sq ft of tile set with a 1/4 × 1/4 inch square-notch trowel needs about 1.1 to 1.2 bags with 10% extra, so buy 2 bags.

Thinset coverage by trowel size

Coverage depends mostly on the trowel: bigger notches leave thicker ridges of mortar, so each bag covers less floor. CUSTOM Building Products publishes this coverage chart per 50 lb (22.68 kg) bag for its VersaBond mortar:

TrowelCoverage per 50 lb bag
1/4 × 1/4 × 1/4 in square notch90–100 sq ft
1/4 × 3/8 × 1/4 in square notch60–67 sq ft
1/2 × 1/2 × 1/2 in square notch42–47 sq ft
3/4 × 9/16 × 3/8 in U-notch at 45°34–38 sq ft

The calculator uses the lower figure for the bag count, so you don’t run short, and shows the range.

How to use the thinset calculator

  1. Choose US or metric units.
  2. Enter the area you are tiling in square feet or square meters. Measure each room or wall and add them together.
  3. Choose your trowel. Use the trowel recommended for your tile size and the mortar you’ve chosen.
  4. Set the waste allowance (10% if blank) and press Calculate.

Worked examples

Bathroom floor: 100 sq ft with a 1/4 × 1/4 inch square-notch trowel. With 10% waste that’s 110 sq ft. At 90 to 100 sq ft per bag that’s 1.1 to 1.22 bags, so buy 2 bags.

Large tile: 200 sq ft of large-format tile with a 1/2 × 1/2 inch square-notch trowel. With 10% waste, 220 sq ft at 42 to 47 sq ft per bag is 4.68 to 5.24 bags, so buy 6 bags.

Choosing a trowel size

The right trowel gives full mortar contact under the tile. CUSTOM states that mortar coverage between the substrate and the underside of the tile must be at least 80% in dry areas and at least 95% in wet areas and outdoors, with all tile edges supported. Larger tiles, tiles with deep patterns on the back and ungauged natural stone usually need bigger notches, and may need flat or notched back-troweling, which uses extra mortar. CUSTOM also notes that the 1/2 inch spacing of a 1/2 inch square notch can make it harder to bed tiles and get proper coverage. Check the tile and mortar instructions, and lift a tile after setting it to see whether the back is fully covered.

Back-troweling adds mortar

When you back-trowel (also called back-buttering), you spread a thin layer of mortar on the back of each tile as well as on the floor. CUSTOM says to consider the tile’s underside pattern and depth to estimate how much extra this uses and add it to your estimate. If you plan to back-trowel every tile, raise the waste allowance, for example to 25 or 30%, or work out the extra separately.

Tips for mixing thinset

  • Mix the whole bag or measure carefully with the water ratio on the bag.
  • Let it slake (rest) for the time on the bag, then remix before use.
  • Spread only what you can tile before the surface skins over.
  • Comb ridges in one direction for the best coverage, as most mortar makers recommend.

Thinset, grout and tile together

A tile job needs three main materials. Count the tiles and boxes with the tile calculator, the thinset here, and the grout for the joints with the grout calculator. For the floor area of an odd-shaped room, the square footage calculator can help.

Walls vs. floors

Wall tiles are usually smaller and lighter than floor tiles, so they are often set with smaller notches, and mortar coverage per bag goes further. Floors with large tiles take bigger notches and much more mortar per square foot. Work out walls and floors separately if they use different trowels, then add the bags together.

Metric units

In metric mode, enter the area in square meters. The coverage figures are converted from CUSTOM’s chart, for example 90 to 100 sq ft per bag is about 8.4 to 9.3 square meters, and the bag is still the 50 lb (22.68 kg) size. The weight row shows the total in kilograms.

Modified or unmodified thinset?

Thinsets come with or without polymer additives. Modified mortars contain polymers that improve bond and flexibility and are required for many tiles and backer boards, while some membranes and tile types call for unmodified mortar. Coverage per bag is similar for the same trowel, so the calculator works for both, but always choose the type your tile, substrate and membrane makers specify.

Preparing the surface

A flat, clean substrate uses mortar more evenly than a dished or uneven one, where low spots fill with extra thinset. Fix high and low spots before tiling, following your tile and mortar instructions, and you’ll get closer to the coverage on the chart. Dampening a very dry substrate, when the mortar maker allows it, can also help the mortar spread and bond.

Coverage varies with the product, the substrate and how you trowel, so check the chart on your bag and buy an extra bag for larger jobs.

What next

Use this often? Add Thinset to your Home screen.

Frequently asked questions

How does the thinset calculator work out bags?

It divides your area, plus waste, by the square feet one 50 lb bag covers with your trowel, using the lower coverage figure, and rounds up.

How much does a 50 lb bag of thinset cover?

About 90 to 100 sq ft with a 1/4 × 1/4 inch square-notch trowel, 60 to 67 with 1/4 × 3/8, and 42 to 47 with 1/2 × 1/2.

How much thinset do I need for 100 square feet?

With a 1/4 × 1/4 inch square-notch trowel and 10% extra, about 1.1 to 1.2 bags, so buy 2 bags of 50 lb.

Does back-buttering use more thinset?

Yes. Spreading mortar on the back of each tile adds to the amount, so raise the waste allowance if you plan to do it.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools