A sod calculator tells you how many rolls or pallets of sod to buy for a lawn. You enter the size of the area, add an allowance for cuts, and the tool rounds up to whole rolls and shows how many pallets that is. If you enter a price per square foot it also gives the cost of the turf, so it doubles as a simple turf cost calculator.
How to use the sod calculator
- Choose US or Metric units.
- Enter the length and width of the lawn, or its area if you know it.
- Leave the extra at 5% or change it. Enter the roll size and pallet size if your supplier gave them, or keep the common defaults.
- Add a price per square foot to see the cost.
- Press Calculate for the rolls, pallets and cost.
The sod formula
Area to buy equals lawn area times one plus the waste percentage. Rolls equal the area to buy divided by the area of one roll, rounded up. Pallets equal the area to buy divided by the area of one pallet. Cost equals the area you actually buy (rolls times roll area) times the price per square foot.
Why order extra sod
Mississippi State University Extension advises that it is always a good idea to buy approximately 5 percent more sod than you think you will need. [1] Curves, corners, edges and trimmed pieces create waste. The calculator uses 5% by default. Raise it to 10% for a lawn with many curves, flower beds or trees.
Roll and pallet sizes
A pallet of sod may range in size but typically contains 450 to 500 square feet, according to Mississippi State University Extension. [1] The calculator uses 450 square feet for a pallet by default. The extension page does not give a roll size, and sizes differ between farms. Many suppliers sell small rolls of about 10 square feet, for example 2 feet by 5 feet, which is the default here as our own common rule of thumb. Some growers sell much larger rolls, called big rolls, which need special equipment to lay. [1]
Sod is cut into slabs, squares or rolls. Wikipedia notes that it can be sold as rolled rectangular slabs or as 4-foot wide rolls. [2] Always ask your supplier for the exact area per roll and per pallet and type those values into the boxes.
Worked example
A lawn is 40 feet long and 25 feet wide, which is 1,000 square feet. With 5% extra you need to buy 1,050 square feet. At 10 square feet per roll that is 105 rolls. A pallet of 450 square feet means 2.33 pallets, so you would order three pallets if the supplier sells only whole pallets. At 50 cents per square foot, 105 rolls cost $525.00.
| Lawn area | With 5% extra | Rolls of 10 sq ft |
|---|---|---|
| 500 sq ft | 525 sq ft | 53 |
| 1,000 sq ft | 1,050 sq ft | 105 |
| 2,000 sq ft | 2,100 sq ft | 210 |
| 5,000 sq ft | 5,250 sq ft | 525 |
Turf cost calculator
Sod is priced per square foot, per roll or per pallet. Enter the price per square foot to see the cost of the sod itself. Delivery, pallet deposits and surcharges are extra, and the extension page notes that surcharges for pallets and big roll cores are common. [1] Installation labour and soil preparation are not included.
Measuring your lawn
- For a rectangle, multiply length by width.
- For an L-shape or irregular lawn, split it into rectangles, work out each area and add them, or type the total area.
- For a circle, multiply the radius by itself and by 3.1416.
- Subtract paths, patios and planting beds you will not cover.
Tips for laying sod
- Order sod to arrive on the day you plan to lay it, because rolls dry out and heat up on a pallet.
- Prepare the soil first: level it, remove stones and rake it smooth.
- Stagger the joints like bricks and press the edges together without stretching the pieces.
- Water well straight after laying and keep the soil moist while roots form.
How many rolls fit in a pallet
If you know the area of a roll and of a pallet, divide one by the other. A pallet of 450 square feet made of 10 square foot rolls holds 45 rolls. Suppliers usually round the roll count on a pallet to whole rolls, so your order may differ slightly from the arithmetic. This is why the calculator shows the pallets as a decimal and also gives the whole-pallet figure.
Choosing between rolls and pallets
Small jobs are normally sold by the roll or the square foot. Large lawns are cheaper by the pallet, and some farms deliver pallets with a forklift. Check whether the farm charges a deposit on the pallet. Ask how soon the sod must be laid after cutting. Sod that sits in the sun on a pallet heats up and can be damaged, so only order what you can lay the same day.
Preparing the soil before you order
Good sod needs good ground. Remove old turf and weeds, grade the area so water runs away from buildings, and loosen the top few inches. If the soil is poor, spread topsoil first. Our topsoil calculator on this site can tell you how much. Keep the finished soil level about an inch below paths and patios so the new lawn sits flush with them.
Common mistakes
- Forgetting the extra for cuts, which leaves you a few rolls short.
- Assuming every farm sells the same pallet size.
- Mixing feet and metres between boxes.
- Not counting beds and paths you will leave bare.
What next
Use this often? Add Sod to your Home screen.
Frequently asked questions
How do I use a sod calculator?
Enter the length and width of the lawn, then press Calculate. You get the rolls to order with 5% extra, the pallets they make up, and the cost if you add a price.
How many square feet are in a pallet of sod?
Mississippi State University Extension says a pallet typically holds 450 to 500 square feet, but it varies by farm, so ask your supplier.
How much extra sod should I buy?
About 5 percent more than you measure is the advice from Mississippi State University Extension. Use 10% for curved or busy lawns.
How big is a roll of sod?
It depends on the farm. A common small roll is about 10 square feet, while big rolls are far larger and need special equipment. Check with your supplier.
Can this work as a turf cost calculator?
Yes. Enter your price per square foot and it multiplies it by the area you buy. Delivery and installation are not included.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.