A topsoil calculator turns the size of a bed, lawn or fill area into the amount of topsoil to buy. Topsoil is usually sold by the cubic yard, or by the cubic metre outside the US, while you measure your yard in feet and inches. This page does the conversion for you, adds an allowance for settling, estimates the weight for trucks and deliveries, and counts bags if you are buying bagged soil.
How to use the topsoil calculator
- Choose US (feet and inches) or Metric.
- Enter the length and width of the area, or type its area if you already know it. The area box overrides the other two.
- Enter the depth of topsoil you want to spread.
- Leave the extra at 10% or change it. Add the weight of a cubic yard from your supplier if you have it, and the size of a bag if you buy bagged soil.
- Press Calculate to see the volume to order, the weight and the bags.
The topsoil formula
The volume is area times depth. In US units, multiply the area in square feet by the depth in inches, then divide by 12 to get cubic feet. One cubic yard is 27 cubic feet, so a cubic yard of material covers 324 square feet to a depth of 1 inch. [1] [2] That gives the quick rule used by gardening guides: area in square feet times depth in inches, divided by 324, equals cubic yards. [2]
In metric units the volume in cubic metres is the area in square metres times the depth in metres, which is the depth in centimetres divided by 100.
Worked example
A raised bed and lawn patch measures 20 ft by 10 ft and needs 4 inches of topsoil. The area is 200 square feet. The volume is 200 times 4 divided by 12, which is 66.7 cubic feet, or 2.469 cubic yards. Adding the default 10% extra for settling gives 2.716 cubic yards to order. At 1.3 tons per cubic yard, that load weighs about 3.5 tons. If the soil comes in 1 cubic foot bags, you need 74 bags, because 2.716 cubic yards is 73.3 cubic feet.
| Depth | Area one cubic yard covers |
|---|---|
| 1/2 inch | 648 sq ft |
| 1 inch | 324 sq ft |
| 2 inches | 162 sq ft |
| 3 inches | 108 sq ft |
| 4 inches | 81 sq ft |
These coverage figures come from the USDA conversion table. [1] The calculator uses the same relationship.
How deep should topsoil be?
The right depth depends on the job. Our own working figures are about 1 inch or less to level small low spots, 2 to 4 inches when you improve an existing lawn, 4 to 6 inches for a new lawn, and 6 to 12 inches for new garden beds. These are common rules of thumb rather than figures from a single source, so follow the advice on your seed, sod or plant label if it differs.
Estimating the weight of topsoil
Weight depends on the soil type and how wet it is. As a common planning figure, a cubic yard of topsoil weighs about 1.2 to 1.35 tons when it is dry or loose and more when it is wet or compacted. This is our own rule of thumb, not a figure from the sources below. The calculator uses 1.3 tons per cubic yard (about 1.5 tonnes per cubic metre) unless you type your supplier’s figure. Delivery trucks have weight limits, so ask the supplier how much one load carries.
Extra for settling and waste
Freshly spread soil settles as it is watered and walked on, and some is lost at the edges. Adding about 10% is a common allowance. Use 0 if you are sure of your measurements and plan to rake the pile level, or raise it to 15 or 20% for rough ground.
Tips for ordering topsoil
- Measure irregular areas by splitting them into rectangles, calculate each, and add the results, or type the total area.
- Ask whether the price is per cubic yard or per ton, and whether delivery is included.
- Look at a sample before you order. Good topsoil is dark, crumbly and free of stones and large lumps of clay.
- Spread it in thin layers on bare ground and mix the top inch with the soil below so that water drains evenly.
- Round up when buying bags, because you cannot buy part of a bag.
Bagged soil or bulk delivery
Bagged topsoil is handy for small jobs, because you can carry it in a car and buy exactly what you need. For anything over a few cubic yards, bulk delivery is usually cheaper per unit of volume, but you need a place to tip the pile and a way to move it. Compare the price per cubic foot of a bag with the price per cubic yard of a load. Remember that one cubic yard holds 27 cubic feet, so a load equals 27 one-cubic-foot bags.
Measuring awkward shapes
For a circular bed, multiply the radius by itself and by 3.14 to get the area. For a triangle, multiply the base by the height and halve it. Add the pieces together and type the total into the area box. Measure twice before you order, because returning a pile of soil is rarely possible.
Common mistakes
- Mixing units, for example entering depth in feet when the box expects inches.
- Forgetting that 12 inches is one foot, which leads to volumes 12 times too large or small.
- Ignoring settling, which leaves the final level lower than planned.
- Using the weight of dry soil for a wet delivery.
Limits of this calculator
The calculator assumes a flat area with an even depth. Slopes, raised beds with sloped sides, and holes to fill need extra thought. It also assumes the soil is spread over the whole area, so subtract paths and paved parts first. Weight is only an estimate. Treat the result as a planning guide, then confirm quantities with your supplier before you pay for a delivery.
What next
Use this often? Add Topsoil to your Home screen.
Frequently asked questions
How do I use a topsoil calculator?
Enter the length, width and depth of the area, then press Calculate. The result shows the cubic yards or cubic metres to order, including an allowance for settling.
How many square feet does a cubic yard of topsoil cover?
A cubic yard covers 324 square feet at 1 inch deep, 162 square feet at 2 inches, 108 square feet at 3 inches and 81 square feet at 4 inches.
How much does a cubic yard of topsoil weigh?
It varies with moisture and soil type. A common planning figure is about 1.2 to 1.35 tons for dry or loose topsoil, and more when it is wet. Ask your supplier for their exact figure.
How much extra topsoil should I order?
About 10% extra is a common allowance for settling and waste. Use less for a precise job and more for uneven ground.
Can I use metric units?
Yes. Switch to Metric to enter metres and centimetres. The result shows cubic metres and the cubic yards to compare with US suppliers.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.