Saved

Press the star next to a tool's name to save it.

All my tools

Siding Calculator

Enter the distance around the house, the wall height and the size of any gables. The siding calculator works out the area to cover, the squares of siding with waste, the boxes of vinyl siding and the cost.

Restored your last values ·

Add up the length of every wall you’re siding.

From the eaves to the peak.

A square is 100 sq ft and a box of vinyl siding holds 2 squares. Gables use width × height × 0.75.

Siding needed

–

Enter the distance around the walls and their height.

See full result

The siding calculator works out how much siding you need to cover a house or a garage. Enter the total length of the walls around the building and their height, add the size of any gables, subtract big windows and doors, and it works out the area in square feet, the number of squares of siding with a waste allowance, and the boxes of vinyl siding to order. Add the price per square to see the cost. For example, a house 140 ft around with 9 ft walls and two 30 ft gables 8 ft tall needs about 15.07 squares with 10% waste, or 8 boxes of vinyl siding.

Squares and boxes

Siding is sold by the square, a construction term for 100 square feet. Hunker explains that a box of vinyl siding holds two squares, so it covers 200 square feet before allowing for waste. Vinyl siding comes in strips about 12 feet long. The calculator gives you the squares for any type of siding and the boxes for vinyl.

How the siding calculator works

  1. Walls = the distance around the building × the wall height.
  2. Gables: Hunker’s rule of thumb is to multiply each gable’s width by its height and by 0.75. A true triangle is half the width times the height; the extra allows for the waste from angled cuts on every strip.
  3. Net area = walls + gables − openings.
  4. Squares = net area × (1 + waste) ÷ 100.
  5. Boxes = squares ÷ 2, rounded up.

How to use the siding calculator

  1. Choose US or metric units.
  2. Enter the distance around the house: add up the length of every wall you’re siding.
  3. Enter the wall height from the foundation to the eaves.
  4. Enter the number of gables and their width and height at the peak.
  5. Enter large openings such as picture windows, patio doors and garage doors.
  6. Set the waste allowance (10% if blank) and the price per square.

Worked example

A ranch house with walls 140 ft around and 9 ft high, two gables 30 ft wide and 8 ft tall, and 250 sq ft of large windows and doors:

  • Walls: 140 × 9 = 1,260 sq ft
  • Gables: 2 × 30 × 8 × 0.75 = 360 sq ft
  • Net: 1,260 + 360 − 250 = 1,370 sq ft
  • With 10% waste: 1,507 sq ft, or 15.07 squares
  • Boxes of vinyl: 15.07 ÷ 2 = 7.5, so 8 boxes

Should you subtract windows and doors?

Hunker advises against subtracting one or two small windows or a standard door: the extra siding gives you leeway for cutting mistakes, and the cuts around openings create waste anyway. Subtract large picture windows, patio doors and garage doors, which take a big area out of the wall. That’s why the openings box is meant for the big ones.

Waste and trim

Gables, corners, and walls broken up by windows all create offcuts, so complex houses need more waste than simple boxes. The calculator starts at 10%; raise it for a house with many corners, dormers or bump-outs. Remember that siding also needs trim pieces that aren’t included in the squares: starter strip along the bottom, J-channel around windows and doors and along the eaves, outside and inside corner posts, and soffit and fascia if you’re replacing them. Measure those in linear feet separately.

Buying tips

Hunker notes that common colors and styles are usually stocked, so you can buy a few extra pieces from an open box. A custom color has to be ordered, and you may not be able to return a partly used box, so order enough the first time. For prominent walls less than 12 feet wide, you might use whole strips to avoid seams, which can mean buying more than the area alone suggests.

Measuring your house

Walk around the house with a long tape and add up the length of each wall you’re siding. Measure the wall height from the bottom of the old siding or the top of the foundation to the underside of the eaves. For gables, measure the width at the base and the height from the eaves to the peak. On a two-story house, measure the height of each story, or use the total height where the walls run straight up. Measure dormers and bump-outs separately and add them in, or raise the waste allowance to cover them.

Other siding materials

Fiber cement, wood lap and engineered wood siding are also estimated in squares, although they are sold by the plank or the board. Once you know the squares, divide the area by the coverage one plank gives at its exposure, which is printed on the product label or data sheet. The waste allowance often needs to be higher for heavy planks that are cut on site.

Before you order

Check the wall sheathing and house wrap while the old siding is off, and repair any rot before the new siding goes on. Confirm the color, style and exposure with your supplier, and ask whether opened boxes can be returned, since that affects how much extra to order.

For wood board siding, work out the lumber with the board foot calculator. Work out paint for wood siding with the paint calculator, and sheathing under the siding with the plywood calculator.

What next

Use this often? Add Siding to your Home screen.

Frequently asked questions

How does the siding calculator work out squares?

It adds the wall area (perimeter × height) and the gables (width × height × 0.75), subtracts large openings, adds waste and divides by 100.

How much does a box of vinyl siding cover?

A box holds two squares, which covers 200 square feet before waste.

How do I measure a gable for siding?

Multiply its width by its height at the peak, then by 0.75. A 30 × 8 ft gable needs about 180 sq ft of siding.

Should I subtract windows when estimating siding?

Only large ones like picture windows, patio doors and garage doors. Small windows and a standard door can be left in for cutting leeway.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools