The plywood calculator works out how many sheets of plywood or OSB you need to sheathe a wall, a floor or a roof. Enter the surface’s size, subtract any windows and doors, choose the sheet size, and it adds a waste allowance and rounds up to whole sheets. For a roof, it also accounts for the pitch, because a sloped roof has more surface than its footprint. For example, a 48 ft run of 8 ft wall with 60 sq ft of windows and doors needs 12 sheets of 4 × 8 plywood with 10% waste.
How the plywood calculator works
- Area = length × height (or width).
- Roof pitch: a roof’s sloped area = its plan area × √(1 + (rise ÷ 12)²). A 4/12 roof has 1.054 times its footprint, and a 6/12 roof 1.118 times.
- Net area = area − windows and doors.
- Sheets = net area × (1 + waste) ÷ sheet area, rounded up. A 4 × 8 ft sheet covers 32 sq ft, a 4 × 9 ft sheet 36 sq ft and a 4 × 10 ft sheet 40 sq ft.
How to use the plywood calculator
- Choose the surface: wall, floor or roof.
- Choose US or metric units.
- Enter the length and height for a wall, the length and width for a floor, or the length and width of the roof’s footprint for one roof plane, plus its pitch.
- Enter windows and doors as a total area to subtract.
- Choose the sheet size, the waste allowance (10% if blank) and the price per sheet.
Worked examples
Wall sheathing: four walls totaling 48 ft long and 8 ft high are 384 sq ft. Less 60 sq ft of windows and doors leaves 324 sq ft; with 10% waste that’s 356.4 sq ft, or 12 sheets of 4 × 8. At $25 a sheet, that’s $300.
Roof: a roof 30 ft long whose two sides together cover a 12 ft wide footprint at a 6/12 pitch: 30 × 12 × 1.118 = 402.5 sq ft. With 10% waste, 442.7 sq ft, or 14 sheets of 4 × 8.
Subfloor: a 12 × 16 ft room is 192 sq ft; with 10% waste that’s 211.2 sq ft, or 7 sheets.
Choosing the sheet size
The 4 × 8 ft sheet is the standard size, and it lines up with framing at 16 or 24 inches on center. APA, The Engineered Wood Association, notes that manufacturers also make extended-length panels for wall sheathing. A 9 or 10 ft sheet can cover a tall wall in one piece, from the bottom plate to the top plate and over the rim joist, which saves cutting and leaves fewer horizontal joints. Choose 4 × 9 or 4 × 10 in the calculator to see how many you’d need.
Plywood or OSB?
Both plywood and oriented strand board (OSB) are used to sheathe walls, floors and roofs, and both come in the same sheet sizes, so the sheet count is the same. OSB is usually cheaper; plywood holds up a little better if it gets wet during construction. For subfloors, tongue-and-groove sheets are common because the edges lock together between joists. Follow your plans or local code for the panel type and thickness.
How much waste to allow
Walls with many windows, roofs with hips and valleys, and floors with odd shapes all create offcuts that can’t be reused. A simple rectangular floor needs little extra, while a cut-up roof may need much more. Offcuts can often fill small areas such as above doors and below windows, so plan your cuts to make the most of each sheet.
Planning tips
- Stagger the joints so the ends of sheets don’t all fall on the same stud, joist or rafter.
- Leave a small gap between sheets for expansion, as the panel maker recommends.
- Run floor and roof sheets with the long side across the joists or rafters.
- Order a sheet or two extra for mistakes and damaged corners.
Roof sheathing tips
For a gable roof, enter the roof’s total footprint, both sides together, and its pitch; the calculator works out the sloped area of both planes. Include the overhangs at the eaves and gable ends in the length and width, as they are sheathed too. For a hip roof or a roof with dormers, work out each plane separately and add the sheets together, and allow more waste for the angled cuts.
Metric units
In metric mode, enter the sizes in meters and the openings in square meters. The sheet sizes stay the same, since panels are made in feet: a 4 × 8 ft sheet is about 1.22 × 2.44 m and covers about 2.97 square meters. The result shows areas in square meters and the price without a currency sign, so you can use any currency.
Buying and storing sheets
Plywood and OSB are heavy and awkward, so check whether your store delivers, and stack sheets flat on a few evenly spaced supports so they don’t bow. Keep them covered and off the ground until you install them, especially OSB, whose edges can swell if they get soaked. Check each sheet for damaged corners before you load it.
For a whole shed, the DIY shed cost calculator estimates sheathing along with framing and shingles. Measure an irregular area with the square footage calculator, and price lumber with the board foot calculator.
What next
Use this often? Add Plywood to your Home screen.
Frequently asked questions
How does the plywood calculator work out sheets?
It multiplies length by height (adjusting a roof for its pitch), subtracts openings, adds waste and divides by the sheet’s area, rounding up.
How many square feet does a sheet of plywood cover?
A 4 × 8 ft sheet covers 32 sq ft, a 4 × 9 ft sheet 36 sq ft and a 4 × 10 ft sheet 40 sq ft.
How many sheets of plywood do I need for a roof?
Multiply the roof’s footprint by the pitch factor, add waste and divide by 32 for 4 × 8 sheets. A 30 × 12 ft footprint at 6/12 pitch needs 14 sheets with 10% waste.
Do OSB and plywood need the same number of sheets?
Yes. They come in the same sheet sizes, so the count is the same.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.