Saved

Press the star next to a tool's name to save it.

All my tools

Shower Cost Calculator

Use this shower cost calculator to find the cost of each shower in water and energy, and the cost per week, month and year, for electric or gas water heaters.

Restored your last values ·

min
per week
%

Prices are in your own currency. The temperature rise is the shower temperature minus the temperature of the cold water coming into your home. Gas in US mode is priced per therm; in metric mode every energy price is per kWh.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Fill in the boxes and press Calculate.

See full result

A shower cost calculator works out what each shower costs you in water and in the energy used to heat it. Enter how long you shower, the flow rate of your showerhead, your water and energy prices, how much the water is warmed and how efficient your water heater is. The calculator shows the cost of one shower and the cost per week, month and year, split into heating and water, with the gallons or litres and the energy used.

How the shower cost calculator works

Every shower has two costs. The first is the water itself, which most homes pay for with a combined water and sewer charge. The second is the energy needed to heat that water, from electricity or gas. The calculator works out the volume of water from the length of the shower and the flow rate, then the energy from the weight of the water and the temperature rise, and finally the cost of both.

Water used = minutes × flow rate
Heat needed (Btu) = gallons × 8.3454 lb × temperature rise (°F)
Energy bought = heat needed ÷ heater efficiency
Electricity (kWh) = Btu ÷ 3,412  ·  Gas (therms) = Btu ÷ 100,000
Cost per shower = energy × energy price + water × water price

The figures come from three Wikipedia articles. The British thermal unit article defines one Btu as the heat needed to raise one pound of water by one degree Fahrenheit, and lists electricity as 3,412 Btu per kilowatt-hour. The Gallon article says a US gallon is 3.785411784 litres and holds 8.3454 pounds of water. The Therm article defines the therm as 100,000 Btu. In metric mode the calculator converts litres and degrees Celsius to the same units first, so both modes give the same answer for the same shower.

How to use it

  1. Choose US or metric units and whether your water heater runs on electricity or gas.
  2. Enter the length of a typical shower in minutes.
  3. Enter the flow rate. It is often printed on the showerhead or its packaging, or you can measure it with a bucket and a timer.
  4. Enter how many showers are taken per week in your home.
  5. Enter your water and sewer price per 1,000 gallons or per cubic metre, from your water bill.
  6. Enter your energy price per kWh, or per therm for gas in US mode.
  7. Enter the temperature rise and the heater efficiency, then press Calculate.

Worked example

An 8-minute shower with a 2.5 gallon-per-minute showerhead uses 20 gallons of water. Heating it by 55 °F takes 20 × 8.3454 × 55 = 9,180 Btu. With an electric heater that is 90 percent efficient, the energy bought is 9,180 ÷ 0.9 = 10,200 Btu, which is 10,200 ÷ 3,412 = 2.99 kWh. At 0.17 per kWh, heating costs about 0.51. The water at 12 per 1,000 gallons costs 0.24, so the shower costs about 0.75 in all. Seven showers a week come to about 5.24 a week and about 272 a year.

Where the flow rate comes from

The EPA's WaterSense programme says that standard showerheads use 2.5 gallons of water per minute, and that showerheads with the WaterSense label use no more than 2.0 gallons per minute. If you do not know your showerhead's rating, a simple check is to hold a bucket under the shower for a set time, measure the water and divide by the minutes. Older showerheads can use more than the standard figure, while some low-flow models use much less.

What the temperature rise means

The temperature rise is how much warmer the water at your shower is than the cold water entering your home. The cold supply is usually cooler in winter than in summer, so the rise changes with the seasons. Use a kitchen thermometer under the shower and the cold tap if you want your own figures. If the cold water is 50 °F and you shower at 105 °F, the rise is 55 °F. In Celsius, water entering at 10 °C and leaving the showerhead at 40 °C is a rise of 30 °C. Heating all the shower water by this amount needs the same energy as heating part of it more in a tank and mixing it with cold water, which is why the calculator uses the shower temperature rather than the tank setting.

Water heater efficiency

No water heater turns all of the energy it buys into hot water. Some heat escapes up a flue or from the tank and pipes. Wikipedia's Water heating article notes that high-efficiency condensing units can turn up to 98 percent of the energy in the fuel into heat for the water, and that electric heat pump water heaters are much more efficient than electric resistance heaters. Look for the efficiency or energy factor on your heater's label or specification sheet and enter it as a percentage. A heat pump heater moves heat from the surrounding air, so it can deliver more heat than the electricity it uses. This calculator accepts up to 100 percent, so for a heat pump enter 100 and treat the heating cost as an upper estimate.

Ways to cut the cost of a shower

  • Shorten the shower. Cost rises in step with time, so cutting two minutes from an eight-minute shower saves a quarter.
  • Fit a lower-flow showerhead. Moving from 2.5 to 2.0 gallons per minute cuts both the water and the energy by a fifth.
  • Turn the temperature down slightly. A smaller rise needs less energy.
  • Compare tariffs. A cheaper energy rate or time-of-use tariff lowers the heating share.

To see how a shower compares with a bath, use the bath vs shower footprint calculator. For a full household energy bill, try the electricity bill calculator.

Common mistakes

  • Using the tank temperature as the rise. Use the shower temperature minus the cold water temperature.
  • Leaving out sewer charges. Many bills charge for the water that leaves your home too, so add both rates together.
  • Mixing therms and kWh. In US mode gas is priced per therm; if your bill gives gas per kWh, choose metric mode.
  • Forgetting efficiency. Entering 100 percent for an older tank makes the shower look cheaper than it is.

What next

Use this often? Add Shower Cost to your Home screen.

Frequently asked questions

How does a shower cost calculator work?

It multiplies the minutes by the flow rate to get the water, works out the energy to heat it from the weight of the water and the temperature rise, divides by heater efficiency, then adds the water and energy costs.

How much water does a shower use?

A standard showerhead uses 2.5 gallons per minute, according to the EPA's WaterSense programme, so an 8-minute shower uses 20 gallons. WaterSense models use no more than 2.0 gallons per minute.

How much energy does it take to heat shower water?

One Btu heats one pound of water by 1 °F. Twenty gallons weigh about 167 pounds, so a 55 °F rise needs about 9,180 Btu, or about 2.7 kWh before heater losses.

Is a gas or electric shower cheaper?

It depends on your prices and heater efficiency. Run the calculator with your own gas price per therm and electricity price per kWh to compare.

How can I lower my shower cost?

Take shorter showers, fit a lower-flow showerhead, turn the temperature down slightly or switch to a cheaper energy tariff.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools