A bath vs shower footprint calculator compares the water used by your shower with the water used by your bath. Enter how long you shower, your showerhead's flow if you know it, and how many gallons your bath holds, and the calculator shows which uses less, the difference each time and over a year, and how long a shower would use as much as your bath.
How much water does a shower use?
The EPA's WaterSense programme says that standard showerheads use 2.5 gallons of water per minute, and that showerheads carrying the WaterSense label must use no more than 2.0 gallons per minute. A shower's water use is therefore its length multiplied by the flow rate: an 8-minute shower with a standard head uses 20 gallons, while the same shower with a WaterSense head uses 16 gallons. The EPA adds that showering accounts for nearly 17 percent of residential indoor water use, which for the average family adds up to nearly 40 gallons per day.
The bath vs shower formula
Shower water = minutes × gallons per minute
Difference = bath water − shower water
Break-even shower = bath water ÷ gallons per minute
The calculator also multiplies the difference by the number of showers or baths a week and by 52 weeks to show the yearly difference, and shows the figures in litres as well as US gallons.
How to use the bath vs shower footprint calculator
- Enter the length of your usual shower in minutes.
- Enter your shower's flow in gallons per minute, or leave it blank for 2.5.
- Enter how much water your bath holds when you fill it to your usual level.
- Optionally enter how many times a week you shower or bathe.
- Press Calculate.
Worked examples
- An 8-minute shower at 2.5 gpm vs a 36-gallon bath: the shower uses 20 gallons, so it uses 16 gallons less. Daily, that is 5,824 gallons a year.
- A 20-minute shower at 2.5 gpm vs the same bath: the shower uses 50 gallons, so the bath uses 14 gallons less.
- Break-even: at 2.5 gpm, a 36-gallon bath equals a 14.4-minute shower. At 2.0 gpm it equals 18 minutes.
Measuring your own figures
Your showerhead may use less or more than the standard figure. To measure it, hold a bucket of known size under the shower and time how long it takes to fill, then divide the gallons by the minutes. For the bath, measure the depth you usually fill to, and multiply the length, width and depth in inches to get cubic inches, then divide by 231 to get US gallons, or use the volume converter. Your own numbers give a more honest comparison than any average.
Saving water and energy
The EPA says that by installing WaterSense labelled showerheads, the average family could save 2,700 gallons per year, and that because these savings reduce demand on water heaters, they also save energy: more than 330 kilowatt hours of electricity a year, enough to power a house for 11 days. Shorter showers save in the same way. Since most of the water in a shower or bath is heated, cutting water use also cuts the energy used to heat it.
Beyond water
The word footprint often refers to the energy and carbon behind an activity. This calculator measures water, which is the main driver: the more hot water you use, the more energy your heater uses. To estimate the cost of the electricity, use the electricity bill calculator. For the rest of your household water, the EPA notes that each American uses an average of 82 gallons of water a day at home.
Comparing a family's water use
If several people in your home shower or bathe, run the calculator for each person's habits, or enter the total number of showers or baths a week. The yearly difference shows how much water the household could save by switching or by shortening showers. Even a few minutes off each shower adds up over a year, and the effect grows with every person in the home.
Small changes that help
Turning off the water while you lather, fixing a dripping showerhead and choosing a lower-flow head all reduce the water used by a shower. For a bath, filling it a little less deep saves water and the energy needed to heat it. Use the calculator before and after a change to see the difference in gallons and litres. For the effect on your energy bill, you can estimate the energy used to heat the water with the help of the household energy tools on this site.
Why the shower usually wins
A typical short shower uses less water than a full bath because the flow stops when you finish, while a bath must be filled to cover you. But the advantage disappears with long showers or powerful showerheads, which is why it pays to check your own numbers rather than rely on a rule of thumb.
Common mistakes
- Assuming a shower always uses less. A long shower can use more than a bath.
- Using the full capacity of the tub. Use the amount you actually fill.
- Forgetting the flow rate. Older showerheads may use more than 2.5 gpm.
What next
Use this often? Add Bath vs Show to your Home screen.
Frequently asked questions
How does a bath vs shower footprint calculator work?
It multiplies your shower length by its flow rate to get the shower's water, then compares that with the water in your bath.
How much water does a shower use per minute?
The EPA says standard showerheads use 2.5 gallons per minute, and WaterSense labelled showerheads use no more than 2.0.
Does a shower use less water than a bath?
Usually, but not always. At 2.5 gallons a minute, a shower longer than your bath's gallons divided by 2.5 uses more water.
How much can a WaterSense showerhead save?
The EPA says the average family could save 2,700 gallons per year and more than 330 kilowatt hours of electricity.
How do I find my bath's water?
Measure the length, width and depth you fill to in inches, multiply them and divide by 231 for US gallons.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.