A gas vs electric dryer calculator compares the running cost of the two kinds of clothes dryer. Enter how many loads you dry each week and the prices on your electricity and gas bills, and the calculator works out the energy each dryer uses per load, the cost per load and the cost per year, so you can see which is cheaper where you live.
How dryer efficiency is measured
ENERGY STAR rates clothes dryers by their Combined Energy Factor, or CEF, in pounds of laundry dried per kilowatt-hour of energy. A higher CEF means a more efficient dryer. The ENERGY STAR criteria list minimum CEF values, including 3.93 for standard vented or ventless electric dryers of 4.4 cubic feet or more, and 3.48 for vented gas dryers. The test uses a load of 8.45 pounds for standard dryers. The calculator uses these values unless you enter the CEF of the dryers you are comparing.
The gas vs electric dryer formulas
Energy per load (kWh) = load weight ÷ CEF
Gas per load (therms) = energy ÷ 29.3 kWh per therm
Cost per load = energy × price
The gas dryer's energy is converted from kilowatt-hours to therms because that is how many gas bills are written. Wikipedia defines the therm as 100,000 British thermal units, approximately 29.3 kilowatt-hours, and notes that in the United States natural gas is commonly billed in CCFs (hundreds of cubic feet) or therms. If your bill uses CCF, check it for the conversion your utility uses.
How to use the gas vs electric dryer calculator
- Enter how many loads you dry in a typical week.
- Enter your electricity price per kWh and your gas price per therm from your bills.
- Optionally enter a load weight and the CEF of the dryers you are considering.
- Press Calculate to see the cost per load and per year.
Worked example
With the ENERGY STAR minimum ratings and an 8.45 lb load, the electric dryer uses 8.45 ÷ 3.93 = 2.15 kWh per load, and the gas dryer uses 8.45 ÷ 3.48 = 2.43 kWh of energy, which is about 0.083 therms. At 17 cents a kWh and $1.50 a therm, that is about 37 cents per load for electric and 12 cents for gas. At five loads a week, the electric dryer costs about $95 a year and the gas dryer about $32. Where electricity is cheap and gas is expensive, the result can reverse, which is why it pays to use your own prices.
Why the answer depends on where you live
Gas dryers usually have a lower rated efficiency than electric dryers, because some heat goes up the vent with the combustion gases. But a unit of energy from gas often costs less than the same energy from electricity, so gas can still be cheaper to run. The balance depends entirely on your local prices. Try the calculator with your current bills, then with a price change, to see how sensitive the answer is.
Beyond running costs
Running cost is only part of the decision. Gas dryers need a gas line and a vent, and they usually cost more to buy. Electric dryers need a suitable electrical circuit. ENERGY STAR says that a full-size electric clothes dryer that has earned the ENERGY STAR saves approximately $210 in energy bills over the life of the product, and that heat pump dryers use around 70 percent less energy than conventional dryers. If you are buying a new dryer, compare the purchase price, installation and the running cost over several years.
Ways to cut drying costs
Spin clothes well in the washer so they hold less water, dry full loads rather than several small ones, clean the lint filter every time, and use a moisture sensor setting instead of a fixed time. Drying on a line when the weather allows costs nothing. For other household energy costs, see the electricity bill calculator, and for energy units the energy converter.
Comparing specific models
If you are choosing between two dryers, look up the Combined Energy Factor on each model's ENERGY STAR listing or specification sheet and enter both values. A more efficient electric model narrows the gap with gas, and a heat pump model can change the answer altogether. Entering real model figures gives a fairer comparison than the minimum ratings, because many certified dryers beat the minimum by a wide margin.
Reading your bills
Your electricity bill shows the price per kWh, sometimes split into an energy charge and delivery charges. Add the parts that change with use to get the price to enter. Your gas bill may show a price per therm or per CCF, again with supply and delivery parts. If your bill uses CCF, ask your utility or check the bill for its therm factor, then convert before entering the price, so that the comparison is like for like.
Common mistakes
- Mixing up therms and CCF. Check which unit your gas bill uses.
- Comparing different dryer sizes. Compare dryers of the same capacity.
- Ignoring installation. Running cost is only one part of the total.
- Using an average price. Use the prices on your own bills.
What next
Use this often? Add Gas vs Elect to your Home screen.
Frequently asked questions
How does a gas vs electric dryer calculator work?
It divides the load weight by each dryer's Combined Energy Factor to get the energy per load, converts the gas dryer's energy to therms, and multiplies by your prices.
What is CEF for a dryer?
The Combined Energy Factor, in pounds of laundry per kWh. ENERGY STAR minimums include 3.93 for standard electric dryers and 3.48 for vented gas dryers.
How many kWh is a therm?
Wikipedia says a therm is 100,000 BTU, approximately 29.3 kilowatt-hours.
Is a gas dryer cheaper to run?
Often, where gas is cheap relative to electricity, but it depends on your local prices. The calculator uses your own bills.
How much can an ENERGY STAR dryer save?
ENERGY STAR says a full-size certified electric dryer saves approximately $210 in energy bills over the life of the product.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.