Saved

Press the star next to a tool's name to save it.

All my tools

RMS to Watts Converter

Use this RMS to watts calculator to find average power from RMS voltage, current and resistance, or from the peak value of a sine wave.

Restored your last values ·

Choose the two values you know. RMS values give average power directly. If you know a sine wave's peak or peak-to-peak value, pick that option and it is converted to RMS first.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter a value and press Calculate.

See full result

This RMS to watts calculator turns RMS voltage or current into average power. Choose the two values you know, such as voltage and resistance, current and resistance, or voltage and current. If you only have the peak or peak-to-peak value of a sine wave, pick that option and the calculator converts it to RMS first, then shows power in watts and kilowatts.

What RMS means

RMS stands for root mean square. It is a way of describing an alternating voltage or current with a single steady number. Wikipedia explains that the RMS of an alternating current equals the value of constant direct current that would dissipate the same power in a resistive load. That is why a 120 V RMS supply heats a heater element exactly as much as 120 V of direct current would.

RMS to watts formulas

P = V_RMS² ÷ R
P = I_RMS² × R
P = V_RMS × I_RMS

For time-varying waveforms, Wikipedia gives the average power in a resistive load as the square of the RMS voltage divided by resistance, the square of the RMS current times resistance, or the product of the RMS voltage and RMS current. It notes that these depend on voltage and current being proportional, which means the load is purely resistive.

How to use the RMS to watts calculator

  1. Choose what you know: voltage and resistance, current and resistance, or voltage and current.
  2. Enter the two values. The labels change to match your choice.
  3. Say what kind of value you entered: RMS, peak or peak-to-peak. Use RMS unless you read the value from a scope or a waveform.
  4. Press Calculate to see average power, and the voltage, current and resistance behind it.

Converting peak and peak-to-peak to RMS

For a sine wave with no offset, the RMS value is the peak value divided by the square root of two, which is about 0.707 times the peak. Equivalently, the peak is the RMS value times the square root of two. Wikipedia gives the peak-to-peak value of a sine wave as 2√2 times the RMS value, about 2.8 times. Triangle and sawtooth waves have different ratios, so this calculator applies the conversion only to a sine wave.

Worked examples

  • 120 V RMS across 10 Ω: P = 120² ÷ 10 = 1,440 W.
  • 20 V RMS into an 8 Ω speaker: P = 20² ÷ 8 = 50 W.
  • 10 A RMS through 12 Ω: P = 10² × 12 = 1,200 W.
  • 120 V RMS and 5 A RMS: P = 120 × 5 = 600 W.
  • A 170 V peak sine wave across 10 Ω: the RMS value is 170 ÷ 1.4142 = 120.2 V, so P = 120.2² ÷ 10 = 1,445 W.

Why “RMS power” is not quite right

You will often see amplifiers rated in “RMS watts”. Wikipedia points out that the term RMS power is sometimes erroneously used, for example in the audio industry, as a synonym for mean or average power. Power itself is not an RMS quantity: it is proportional to the square of the RMS voltage or current in a resistive load. In this calculator, the result is the average power for the RMS values you enter.

Using the result

Knowing the average power lets you check whether a resistor, heater or speaker is within its rating, estimate heat output or compare it with a supply's capacity. If you need to convert the answer to other power units, try the power converter. To size cable for the current, see the wire size calculator and the voltage drop calculator.

Heating, lamps and speakers

The same formulas apply to any device that behaves like a resistor. A heater rated at 1,500 W on a 120 V supply draws 12.5 A, and its resistance is about 9.6 Ω, because 120 squared divided by 1,500 is 9.6. A speaker rated at 8 Ω that receives 28.3 V RMS is dissipating about 100 W. Working backwards from a power rating to the voltage or current involved is just as easy: rearrange the formulas, or try values in the calculator until the power matches.

Why a sine wave has an RMS value

An alternating voltage swings between positive and negative peaks, so its simple average over a full cycle is zero, which tells you nothing about the heat it produces. Squaring the voltage makes every part of the cycle positive, averaging the squares gives the mean power, and taking the square root brings the result back to volts. That is the root mean square. For a sine wave the answer works out to the peak divided by the square root of two. The calculation is the reason the household supply in many countries is quoted as an RMS figure rather than a peak.

Using an oscilloscope reading

An oscilloscope shows the shape of the signal, so it is natural to read the peak or the peak-to-peak height from the screen. If the trace is a clean sine wave, choose the matching option in the calculator and it will convert the reading to RMS before working out the power. If the waveform is distorted, a square wave or a mix of frequencies, the factor is different, and a true-RMS meter gives a more reliable reading than a conversion from the peak.

Common mistakes

  • Using the peak value as if it were RMS. This overstates power by a factor of two for a sine wave.
  • Ignoring the load type. For a motor or a transformer the true power also depends on the power factor.
  • Mixing units. Use volts, amps and ohms, not millivolts or kiloohms, unless you convert first.
  • Applying the sine-wave factor to other waveforms. Square, triangle and sawtooth waves have different ratios.

What next

Use this often? Add RMS to Watts to your Home screen.

Frequently asked questions

How do you use an RMS to watts calculator?

Choose the two values you know, such as RMS voltage and resistance, and enter them. The calculator uses P = V² ÷ R, P = I² × R or P = V × I to give average power in watts.

How do you convert RMS voltage to watts?

Square the RMS voltage and divide by the resistance. For example, 120 V RMS across 10 Ω gives 14,400 ÷ 10 = 1,440 W.

How do you convert peak voltage to RMS?

For a sine wave, divide the peak voltage by the square root of two, about 1.414. A peak of 170 V is about 120.2 V RMS.

Is RMS power the same as average power?

Wikipedia notes that RMS power is sometimes erroneously used as a synonym for mean or average power. Power is proportional to the square of the RMS voltage or current in a resistive load.

Does the calculator include power factor?

No. It assumes a resistive load where voltage and current are in phase. Reactive loads also have a power factor.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools