Saved

Press the star next to a tool's name to save it.

All my tools

Resuspension Calculator

Use this resuspension calculator to find the volume of diluent to add to an oligo, from its amount in nmol and the concentration you want in µM, or solve for the other two.

Restored your last values ·

nmol
µM
µL

Choose which quantity to find. Enter the other two: the amount of oligo in nmol, the concentration you want in µM, or the volume of diluent in µL. The default finds the volume to add.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what to find, fill in the other two values, then press Calculate.

See full result

A resuspension calculator tells you how much diluent to add to a dry oligonucleotide to reach the concentration you want. Enter the amount in nanomoles and the target concentration in micromolar, and it gives the volume in microlitres. It can also find the concentration or the amount instead.

How to use the resuspension calculator

  1. Choose what to find.
  2. Enter the other two values: amount in nmol, concentration in µM, volume in µL.
  3. Press Calculate.

What resuspension means

Oligonucleotides, short stretches of DNA or RNA, are often supplied dry in a tube. Before use they are resuspended, which means dissolved in a diluent to a stock of known concentration. Suppliers such as Biosearch Technologies advise resuspending the product in a solution such as TE buffer (10 mM Tris, 1 mM EDTA, pH 8) [1]. The calculator tells you the volume of diluent that gives the concentration you want, given the amount of oligo in the tube.

The formula

Wikipedia defines molar concentration as the amount of a substance divided by the volume of the mixture [2]. With the amount in nanomoles and the concentration in micromolar, the volume in microlitres is the amount multiplied by 1,000 and divided by the concentration. In symbols, V = n × 1000 ÷ C. Biosearch's rule for a 100 µM stock, multiply the nanomoles on the certificate of analysis by 10 to get the microlitres of diluent, is the same formula with C = 100 [1]. Any two of the three quantities give the third. The calculator rearranges the formula for the other two cases, which is our own algebra: the amount is V × C ÷ 1000 and the concentration is n × 1000 ÷ V.

Why 1000 appears

Our own reading of the factor of 1000 is that one nanomole in one micromolar solution fills one millilitre, and a millilitre is 1,000 microlitres. So the factor only converts units. This is also why the calculator shows the volume in millilitres as well as microlitres: a result of 1,500 µL is the same as 1.5 mL, which is easier to picture when you choose a pipette.

First worked example

Take 60 nmol of oligo and a wanted concentration of 40 µM. The volume is 60 × 1000 ÷ 40 = 1,500 µL, or 1.5 mL. Adding 1,500 µL of diluent to the tube gives a stock of 40 µM. This example is our own, and you can use it to check the tool.

Two more examples

Two more cases: 10 nmol at 100 µM needs 100 µL, which matches Biosearch's multiply-by-10 rule [1], and 100 nmol at 1,600 µM needs 62.5 µL. The calculator gives both. The last case shows that a high concentration needs only a small volume, and why the result may have a decimal: 62.5 µL is a volume that a normal pipette can measure.

Finding the other quantities

Choose the concentration mode when you already know the volume you will add and want to know what you get. With 60 nmol in 1,500 µL, the answer is 40 µM. Choose the amount mode to find how much oligo a volume at a given concentration holds. With 1,500 µL at 40 µM, the answer is 60 nmol. These two modes are our own rearrangements of the formula above.

Reading the amount on the tube

Suppliers usually give the yield of a tube in nanomoles on the label or data sheet. Use that figure in the first box. If your tube lists micrograms or optical density units instead, the amount in nanomoles depends on the molecular weight or extinction coefficient of the oligo. Converting from mass needs the molecular weight of the oligo, so this calculator does not convert from mass.

Choosing the diluent

Biosearch names TE buffer as an example of the diluent [1]. The calculator does not depend on which you choose, because the formula uses only the volume. Which diluent suits your work depends on what you do next with the oligo, so follow the supplier's instructions for your product. After you add it, mix the tube as the supplier advises before you use the stock.

What this calculator is not

This calculator is for oligonucleotides in nanomoles. It does not cover proteins or freeze-dried peptides that are dissolved by mass, for example in milligrams per millilitre. A mass version of the same idea, volume equals mass divided by concentration in matching units, would be our own working and is not built here. Keep each calculation to the units that the tool states.

Using the calculator

Pick what you want to find, type the other two values with the units shown beside the boxes, and press the button. The result line says what to add or what you will get, and the working line shows the numbers in the formula. If the volume is very small or very large, check the amount and the concentration for a slip of a factor of ten or a thousand.

Checking your result

A quick check helps to catch a slipped decimal. Because the volume is the amount times 1,000 divided by the concentration, doubling the volume of diluent halves the concentration, and halving the concentration doubles the volume. If you want a stock ten times stronger, you need one tenth of the volume. These are our own observations from the formula, and they hold for every case that the calculator accepts.

Common mistakes

  • Entering the amount in micrograms. The box expects nanomoles.
  • Mixing up micromolar and millimolar. The box expects micromolar, µM.
  • Reading the result in mL as µL. The result gives both; check which you pipette.
  • Forgetting to mix after adding the diluent. Follow the supplier's instructions.

What next

Use this often? Add Resuspension to your Home screen.

Frequently asked questions

What is a resuspension calculator?

A tool that finds the diluent volume to add to a dry oligo to reach a wanted concentration.

What is the resuspension formula?

Volume in µL equals the amount in nmol times 1,000, divided by the concentration in µM.

How much diluent do 60 nmol of oligo need for 40 µM?

1,500 µL, which is 1.5 mL.

Can it convert micrograms or OD to nanomoles?

No. That needs the oligo's molecular weight or extinction coefficient.

Which diluent should I use?

TE buffer is a common choice. Follow your supplier's instructions.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools