A punch force calculator tells you how much force a punch must apply to cut a hole through a sheet of metal. You enter the perimeter of the hole, the thickness of the sheet and the shear strength of the material, and it returns the punching force in newtons, kilonewtons, pounds-force and tonnes-force.
How to use the punch force calculator
- Choose US or metric units.
- Say whether you know the perimeter or the diameter of the hole, and enter it.
- Enter the thickness of the sheet.
- Choose a material or enter its shear strength, or its tensile strength.
- Press Calculate.
What punch force means
Punching shears a piece of material, called the slug, out of a sheet. The force needed is the force that shears all around the edge of the hole at once. This calculator is for hole punching in sheet material such as aluminium or steel plate. It is not the force of a boxer's punch, and it is not the tonnage rating of a press brake. Wikipedia's article on punching gives a punch force estimate from the length sheared, the thickness and the tensile strength of the sheet [1].
The formula
The force F is the perimeter of the hole P times the shear strength S of the material times the thickness t of the sheet, so F = P × S × t. This is the shear stress relation τ = F ÷ A, with the cut area A = P × t [2]. With the perimeter and the thickness in millimetres and the strength in megapascals, the answer is in newtons. In our own words, the cut surface is the perimeter times the thickness, and the force is that area times the stress at which the material shears.
A worked example
Take a hole with a perimeter of 15 mm in a sheet 5 mm thick, made of aluminium 7075-T6 with a shear strength of 331 MPa. The force is 15 × 5 × 331 = 24,825 newtons, or 24.825 kilonewtons. The 331 MPa is a figure we use for this alloy and temper, so check it against your supplier's data. In US units the same hole is 0.59 inch round in a sheet 0.197 inch thick, and the force is about 5,581 pounds-force. Enter these values and compare.
Perimeter or diameter
For a circular hole you can give the diameter instead. The perimeter is then P = π d. For a 3 mm round hole in a stainless sheet 5 mm thick, with a shear strength of 400 MPa, the perimeter is 9.4248 mm and the force is 400 × 9.4248 × 5 = 18,849.6 newtons. Rounded, that is 18.85 kilonewtons. For a slot or a square hole, measure the whole outline and enter it as the perimeter.
Shear strength and the 0.7 rule
If you do not know the shear strength, a shortcut is to take 0.7 times the tensile strength, so the combined formula is F = 0.7 × P × T × t, as in Wikipedia's article on punching [1]. Wikipedia's article on shear strength says it is commonly estimated as 60 percent of the ultimate tensile strength, with a ratio of about 0.65 for aluminium alloys and 0.75 for steels [2]. We use 0.7, which is a little above those figures, so the result is on the high side. Choose the option that works the strength out from the tensile strength to use it.
The material presets
We offer two presets: 331 MPa for aluminium 7075-T6 and 400 MPa for stainless steel. These are the tool's own planning figures, not values from a published table. For any other metal, enter the shear strength from your own supplier's data sheet. We do not invent figures for other materials.
US and metric units
In US mode, you enter the perimeter and the thickness in inches and the strength in psi. The calculator converts them to millimetres and megapascals, using 25.4 millimetres to the inch and 145.04 psi to the megapascal, which is our own conversion, and works out the force in newtons. The result then leads with pounds-force in US mode and newtons in metric mode, and always gives the other units in brackets. The same inputs give the same force in either mode.
The other outputs
Besides the force, you see the shear strength that was used, the hole perimeter and sheet thickness in both unit systems, and the full working. The force is also given in tonnes-force, which is the force in newtons divided by 9,806.65, and in US short tons-force, which is the pounds-force divided by 2,000. These conversions are our own working. They are handy when you compare the result with the rating of a press, which is often given in tons.
What the result does not cover
The formula includes no tool clearance, no die or slug detail, no stripping force and no safety factor for the press. It gives the force of the cut and nothing more. In a real shop, the press needs more capacity than the bare shearing force, and the tooling needs to be right for the material. Treat the answer as the minimum cutting force, and let a qualified toolmaker advise you on the margin.
Tips for good results
Measure the sheet itself, not the nominal gauge, and use the strength of the exact alloy and temper. Enter the whole outline of an odd-shaped hole. Remember that a larger hole or a thicker sheet raises the force in direct proportion. Halving the thickness halves the force, and doubling the perimeter doubles it. If the answer is close to the limit of your press, choose a smaller hole, a thinner sheet or a bigger press.
Common mistakes
- Entering the diameter as the perimeter. Pick the right option, since the perimeter is about three times the diameter.
- Mixing units. Use one system for the length, the thickness and the strength.
- Using tensile strength as the shear strength. Use the 0.7 option instead.
- Forgetting the margin. Add capacity for the press and the tooling.
What next
Use this often? Add Punch Force to your Home screen.
Frequently asked questions
What is a punch force calculator?
A tool that finds the force needed to shear a hole through sheet material, from the hole perimeter, the thickness and the shear strength.
What is the punch force formula?
F = P × S × t, the perimeter of the hole times the shear strength times the sheet thickness.
How do I find the shear strength?
Use your supplier's data sheet, or take 0.7 times the tensile strength, a common shortcut.
Does the punch force calculator include a safety factor?
No. It gives the bare shearing force. The press and the tooling need a margin above it.
Is this the same as the force of a boxer's punch?
No. That is a different tool. This one is for punching holes in sheet material.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.