Saved

Press the star next to a tool's name to save it.

All my tools

Optical Density Calculator

Use this optical density calculator to turn incident and transmitted light into the optical density, absorbance and transmittance, and find the concentration from Beer–Lambert.

Restored your last values ·

Choose what you know: the incident and transmitted light, the optical density, or the transmittance. You get the optical density, the transmittance and the share of light that is blocked. Add the extinction coefficient and the path length to find the concentration.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you know and fill in the boxes, then press Calculate.

See full result

An optical density calculator turns the light that goes into a sample and the light that comes out into the optical density, the absorbance and the transmittance. You can also start from a known optical density or a percent transmittance, and add the extinction coefficient and path length to find the concentration.

How to use the optical density calculator

  1. Choose what you know.
  2. Enter the light in and out, the optical density or the transmittance.
  3. Add ε and the path length for the concentration.
  4. Press Calculate.

Optical density and absorbance

Below, I₀ is the incident light and I the transmitted light. The absorbance is A = log₁₀ of the incident flux divided by the transmitted flux, which equals minus the log₁₀ of the transmittance [1]. The transmittance in percent is I ÷ I₀ × 100, our own restatement of the definition. The article says that the term optical density redirects to the absorbance page [1], so this calculator gives one value for both.

The sign

Some sources write the optical density with the opposite sign, so that a sample that dims the light gives a negative number. We follow Wikipedia, where the absorbance is positive when a sample dims the light [1]. If you compare values from another source, the size of the value is what matters. A negative result here means that more light came out than went in, which can happen when a sample glows or the readings are off.

The worked example

Take an incident intensity of 1.5 and a transmitted intensity of 0.35. The ratio is 4.2857, and the log₁₀ of it is 0.63202. The transmittance is 0.35 ÷ 1.5 = 23.333 percent. The tool gives 0.63202 and 23.333 percent for those numbers.

A second example

A cell culture with an incident reading of 0.80 and a transmitted reading of 0.10 has a ratio of 8, and log₁₀(8) is 0.90309. The transmittance is 12.5 percent. When the two intensities are equal, the optical density is 0 and the transmittance is 100 percent. The tool gives the same.

From the transmittance

If you know the percent transmittance, the optical density is minus the log₁₀ of the transmittance as a fraction, from A = −log₁₀ T [1]. A transmittance of 10 percent gives an optical density of 1, and 1 percent gives 2. Each whole unit therefore cuts the light by a factor of 10, which is our own reading of the formula. Wikipedia's own example is a filter with a transmittance of 0.1 percent, which has an absorbance of 3 [1].

From the optical density

If you know the optical density or absorbance, the transmittance is 10 to the power of minus A, times 100 percent. An optical density of 2 means that 1 percent of the light passes and 99 percent is blocked. The tool shows both numbers, and says how many times weaker the light is. This direction is useful for a filter or a pair of protective glasses, where the optical density of the lens is printed on the label.

Beer–Lambert law

The Beer–Lambert law says that for a sample that does not scatter light, the absorbance is A = ε × ℓ × c, where ε is the molar attenuation coefficient, ℓ the path length and c the concentration [1]. Rearranged, c = A ÷ (ε × ℓ). Enter ε in litres per mole per centimetre and the path length in centimetres, and the tool gives the concentration in moles per litre.

A concentration example

With an absorbance of 0.632, a coefficient of 15,000 litres per mole per centimetre and a path length of 1 centimetre, the concentration is 0.632 ÷ 15,000 = 4.21 × 10⁻⁵ moles per litre. The coefficient of 15,000 is only an example value of ours, not a property of any substance. Use the coefficient for your own compound at your wavelength, from a reference or a measured calibration.

Optical density versus absorbance

In practice, an optical density reading from a spectrophotometer can include light lost to scattering and reflection as well as absorption, which is our own note. For a clear solution, the two are the same. For a turbid culture, the reading includes scattering, and the Beer–Lambert law no longer holds in its simple form: it tends to break down where scattering and turbidity become significant [2]. The concentration result is therefore only valid for a clear sample.

Using the calculator

Select what you know, enter the numbers and press the button. Use the same unit for both intensities: it does not matter which, since only the ratio counts. Read the optical density, the transmittance and the blocked share. Add the coefficient and the path length for a concentration. A reading above 2 or 3 is usually close to the limit of what a spectrophotometer can measure, so dilute the sample if you can.

Reading the result

The first line of the result gives the optical density, the transmittance and the share of light that is blocked. The second line gives the formula used. Because the optical density is logarithmic, a small change in the reading at a high value means a large change in the light that passes. An optical density of 3, for instance, lets through only one part in a thousand [1].

Common mistakes

  • Using different units for the two intensities. Both must be in the same unit.
  • Expecting a negative optical density. Dimmed light gives a positive value here.
  • Applying Beer–Lambert to a cloudy sample. Scattering breaks the law.
  • Entering the path length in metres. Use centimetres.

What next

Use this often? Add Optical Dens to your Home screen.

Frequently asked questions

What is an optical density calculator?

A tool that finds the optical density, absorbance and transmittance of a sample from the light in and out.

What is the optical density formula?

OD = A = log10 of I0 divided by I, which equals minus the log10 of the transmittance.

How do I convert absorbance to transmittance?

Transmittance in percent is 100 times 10 to the power of minus the absorbance.

Why do some sources show negative optical density values?

Some write OD with the opposite sign. We show the usual positive value for dimmed light.

What is the Beer-Lambert law?

For a clear sample, A = ε × ℓ × c, so c = A ÷ (ε × ℓ).

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools