This natural frequency calculator finds the frequency at which a system vibrates by itself when nothing pushes it. Choose a spring and a mass, a simple pendulum, a structure with a known static deflection, or a beam on two supports with a mass at the centre, and enter the values. It gives the frequency in hertz, the angular frequency and the period.
How to use the natural frequency calculator
- Choose the system.
- Enter the values in the units shown beside each box.
- Press Calculate.
What natural frequency is
The natural frequency is the rate at which an oscillating system vibrates when nothing disturbs it; free vibrations of an elastic body occur at this frequency [2]. If a periodic force acts on the system at about this frequency, the amplitude can grow a lot, which is called resonance [2]. Knowing the natural frequency helps to keep machines, floors and bridges away from the frequencies that they are likely to meet.
Spring and mass
For a mass M on a spring with the constant k, the angular frequency is ω = √(k ÷ M) and the frequency is f = ω ÷ 2π [1]. Wikipedia's article on simple harmonic motion gives the same system, with the period T = 2π √(m ÷ k) and the relations f = 1 ÷ T and ω = 2π f [1]. The mass of the spring itself is ignored. A stiffer spring raises the frequency, and a heavier mass lowers it.
A spring example
Take a spring of 64 newtons per metre with a mass of 0.5 kilogram. Then ω = √(64 ÷ 0.5) = √128 = 11.314 radians per second, and f = 11.314 ÷ 2π = 1.8006 hertz, with a period of 0.5554 second.
Simple pendulum
For a simple pendulum, Wikipedia gives the period for small swings as T = 2π √(L ÷ g) [1]. The angular frequency is then ω = √(g ÷ L), and the mass of the bob does not matter. We take g = 9.81 metres per second squared, a standard rounded value. A pendulum 1 metre long has a period of 2.0061 seconds and a frequency of 0.49849 hertz. The result holds for small angles only.
Structure from its deflection
For a structure that carries a concentrated mass, the frequency can be written f = (1 ÷ 2π) √(g ÷ δ), where δ is the static deflection that the weight causes. This is our own working, from the spring formula with k = M g ÷ δ. For a deflection of 10 millimetres, f = (1 ÷ 2π) √(9.81 ÷ 0.01) = 4.9849 hertz. This is the same as a spring with a stiffness that gives that deflection under the weight, which is why only g and δ appear.
Beam on two supports
For a beam on two supports with a mass in the middle, the beam acts as a spring of stiffness 48 E I ÷ L³, because its central deflection under a load P is P L³ ÷ (48 E I) [3]. So f = (1 ÷ 2π) √(48 E I ÷ (M L³)), where E is Young's modulus, I the second moment of area, L the length and M the mass. As an example, a steel beam with L = 10 metres, E = 178 gigapascals, I = 2.140 × 10⁻⁵ m⁴ and M = 500 kilograms, gives 3.0435 hertz. Enter I as 2,140 cm⁴.
Units
The beam example needs a large and a small number, so the boxes use units that keep the numbers readable: gigapascals for E and cm⁴ for I, where 1 cm⁴ is 10⁻⁸ m⁴. The calculator converts them to metres and pascals. The spring constant is in newtons per metre, the masses in kilograms, the lengths in metres and the deflection in millimetres. These are all SI-based, so there is no US option.
Formulas we left out
Other cases exist, such as a beam with distributed mass or a cantilever, but their constants could not be checked against a primary source, so we did not include them. The four systems here are the ones where the formula follows directly from the spring and pendulum relations.
Limits
All the formulas assume no damping and no outside force. Damping lowers the frequency a little, and a real beam also has mass of its own, which lowers the frequency further, so the beam result is an upper estimate. The pendulum formula needs small angles. Treat these results as estimates for a first design, and have a structure checked by an engineer.
Using the calculator
Select the system, fill in the boxes and press Calculate. Try doubling the mass of a spring system to see the frequency fall by the square root of two, or making the pendulum four times longer to halve the frequency. This is also the simple harmonic motion calculator for a mass on a spring and a pendulum, with the period shown next to the frequency.
Resonance and design
Resonance is the reason why the natural frequency matters in practice. If a periodic force acts on a system near its natural frequency, the amplitude can grow a great deal [2]. For a floor, a machine mount or a small bridge, the aim is to keep the natural frequency well away from the frequencies of the forces that act on it, such as footsteps or a motor. Compare the result with those frequencies, and change the mass or the stiffness if they are close.
Frequency, angular frequency and period
The three quantities describe the same motion. The frequency counts cycles per second, the period is the time of one cycle, and the angular frequency is the frequency times 2π, in radians per second [1]. The calculator shows all three, so that you can use whichever your formula needs.
Common mistakes
- Using the wrong unit for I. The second moment of area is in cm⁴ here, not m⁴.
- Entering the pendulum mass. It does not affect the frequency.
- Using large swings. The pendulum formula is for small angles.
- Mixing the angular frequency and the frequency. Divide ω by 2π to get hertz.
What next
Use this often? Add Natural Freq to your Home screen.
Frequently asked questions
What is a natural frequency calculator?
A tool that finds the frequency at which a system vibrates when left alone.
What is the natural frequency of a spring and mass?
f = (1 ÷ 2π) √(k ÷ M), with k the spring constant and M the mass.
What is the frequency of a simple pendulum?
f = (1 ÷ 2π) √(g ÷ L) for small swings, and it does not depend on the mass.
What is resonance?
A large rise of the amplitude when a periodic force acts at about the natural frequency.
Does this natural frequency calculator include damping?
No. It assumes an undamped system.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.