Saved

Press the star next to a tool's name to save it.

All my tools

Angular Velocity Calculator

Use this angular velocity calculator to find how fast something turns, from revolutions per minute, a tangential speed and radius, or an angle and a time, in rad/s, degrees per second and rpm.

Restored your last values ·

Choose revolutions per minute, a tangential speed with a radius, or an angle turned in a time. The result is in radians per second, degrees per second and revolutions per minute, with the frequency and the period.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you know and fill in the boxes, then press Calculate.

See full result

An angular velocity calculator converts between the ways of describing how fast something turns. Enter revolutions per minute, a speed along a circle with its radius, or an angle turned in a time, and it gives the angular velocity in radians per second, degrees per second and revolutions per minute, with the frequency and the period.

How to use the angular velocity calculator

  1. Choose what you know.
  2. Enter the value, and the radius or time if it is needed.
  3. Press Calculate.

Definition

Angular velocity is the rate at which the angle changes with time, ω = dθ ÷ dt, and its unit is the radian per second [1]. For a steady turn, divide the angle turned by the time taken. A wheel that turns through 90 degrees in 2 seconds has an angular velocity of 0.7854 radians per second, which is 45 degrees per second.

Linear and angular speed

A point at a distance r from the axis moves at a speed v = r ω, so that ω = v ÷ r [1]. The angular velocity is the same for every point on a rigid turning body, but the speed grows with the distance from the axis. A rim speed of 10 metres per second at a radius of 0.5 metres gives ω = 20 radians per second.

Revolutions per minute

Engines, motors and disks are rated in revolutions per minute. One revolution is 2π radians, and a minute is 60 seconds, so ω = rpm × 2π ÷ 60. This relation is our own statement of the unit conversion, since the page that we read does not give it. A shaft at 3,000 rpm turns at 314.159 radians per second, which is 18,000 degrees per second.

Frequency and period

The frequency in hertz is the number of turns per second, which is ω ÷ 2π, and the period is the time for one turn, 2π ÷ ω. For 3,000 rpm the frequency is 50 hertz, and one turn takes 0.02 seconds. The calculator shows both, since they are often needed with the angular velocity, for example for the supply frequency of a motor.

Tangential speed

Add the radius of a point on the body, in the first or the third mode, and the calculator gives the speed of that point as well. A point at 0.1 metres on a shaft at 3,000 rpm moves at 31.4159 metres per second, or 113.1 kilometres per hour. This is the speed that matters for the edge of a grinding wheel or a saw blade.

Radians and degrees

Radians measure an angle as the ratio of the arc to the radius, and one radian is about 57.2958 degrees. Formulas such as v = r ω work only when the angle is in radians. The calculator shows both units so you can use whichever your problem needs, and converts internally to radians.

Direction

Angular velocity is a vector, which points along the axis of rotation by the right-hand rule. The calculator treats it as a number, with a negative value for a turn in the opposite direction. The frequency and the period are shown for the size of the turn. For a turning body in a plane, the sign is just the sense of the turn.

Limits

The calculator is for steady turning, so that the angle grows at the same rate. If the speed changes, the result is the average angular velocity over the time that you enter. The angular acceleration, the rate at which the angular velocity changes, is not computed here. For a turning body that is not rigid, different parts may turn at different rates.

Using the calculator

Choose the mode that fits the data you have, enter the value and press the button. In the rpm mode, add a radius to get the speed of a point. In the angle mode, enter the angle in degrees and the time in seconds. The working line shows the formula that was used, so you can check the conversion by hand.

Everyday examples

A record at 33⅓ rpm turns at 3.4907 radians per second, and one at 45 rpm at 4.7124. The second hand of a clock turns at 6 degrees per second, which is 0.10472 radians per second, and the minute hand at 0.1 degrees per second, or 0.001745 radians per second. The tip of a 10 centimetre second hand therefore moves at about 10.5 millimetres per second. These are our own calculations from the definitions above.

Angular frequency

In physics, the angular velocity of a steady circular motion is also called the angular frequency when the motion is an oscillation. It equals 2π times the frequency in hertz. A mains supply at 50 hertz has an angular frequency of 314.16 radians per second, the same figure as a shaft at 3,000 rpm.

Checking your units

Most mistakes come from the units. Make sure that a speed is in metres per second and a radius in metres before you use the speed and radius mode, and that an angle is in degrees and a time in seconds in the angle mode. If you have a speed in kilometres per hour, divide it by 3.6 first. A wheel of radius 0.3 metres on a car at 90 kilometres per hour, which is 25 metres per second, turns at 83.33 radians per second, about 796 revolutions per minute.

Common mistakes

  • Using degrees in v = r ω. Use radians.
  • Confusing rpm with rad/s. One rpm is 0.1047 rad/s.
  • Using the diameter as the radius. Halve it.
  • Forgetting the time unit. Time is in seconds.

What next

Use this often? Add Angular Velo to your Home screen.

Frequently asked questions

What is an angular velocity calculator?

A tool that finds the rate of turning in rad/s, degrees per second and rpm.

What is the formula for angular velocity?

ω = θ ÷ t for a steady turn, or ω = v ÷ r from a tangential speed.

How do I convert rpm to rad/s?

Multiply by 2π and divide by 60.

How is angular velocity related to linear speed?

v = r ω, where r is the distance from the axis.

What unit is angular velocity measured in?

Radians per second.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools