To convert hertz to kilohertz, multiply the number of hertz by 0.001. Both are units of frequency, so the relationship between them never changes. One hertz is 0.001 kHz. Enter a value and this frequency converter gives the answer straight away; swap the units to turn kilohertz back into hertz.
Frequency formula
Kilohertz = hertz × 0.001
To go the other way, multiply kilohertz by 1,000 to get hertz. Because the factor is fixed, the answer is the same every time, and you can reverse the conversion without losing accuracy.
How to use the frequency converter
- Enter the amount in hertz. Decimals are fine.
- Check the units. From is hertz and To is kilohertz. Press Swap units to convert kilohertz to hertz.
- Read the result, with the same amount in other frequency units in the table below.
Worked example
A measurement comes to 25,000 hertz. Multiply by 0.001 to get 25 kHz. Going the other way, 4 kilohertz × 1,000 = 4,000 Hz.
Hertz to kilohertz conversion chart
These values cover amounts commonly converted between hertz and kilohertz.
| Hertz (Hz) | Kilohertz (kHz) |
|---|---|
| 1,000 Hz | 1 kHz |
| 2,000 Hz | 2 kHz |
| 3,000 Hz | 3 kHz |
| 5,000 Hz | 5 kHz |
| 10,000 Hz | 10 kHz |
| 20,000 Hz | 20 kHz |
| 50,000 Hz | 50 kHz |
| 100,000 Hz | 100 kHz |
| 500,000 Hz | 500 kHz |
| 1,000,000 Hz | 1,000 kHz |
What is a hertz?
The hertz, symbol Hz, is the unit of frequency in the International System of Units, often described as one event or cycle per second. Formally it's the reciprocal of one second, and it's used only for periodic events. It's named after Heinrich Rudolf Hertz, the first person to give conclusive proof that electromagnetic waves exist. Higher frequencies are written with multiples such as kilohertz, megahertz, gigahertz and terahertz.
What is a kilohertz?
A kilohertz, written kHz, is 1,000 hertz, or a thousand cycles per second. It's a convenient size for sound and for low radio frequencies, such as the AM broadcast band. The same table also includes revolutions per minute for rotating machines: one revolution per minute is equivalent to one sixtieth of a hertz, so a motor turning at 3,000 rpm completes 50 revolutions every second.
Estimating in your head
For a rough answer, divide the number of hertz by about 1,000. Going the other way, multiply the number of kilohertz by about 1,000. Rounded figures are fine for a quick check, but use the converter when the result matters, because small differences add up over large amounts. A useful habit is to write the unit beside every number, so that you can see at a glance which way the conversion should go. It also helps to compare the two units directly: one hertz is 0.001 kHz, and one kilohertz is 1,000 Hz.
Converting hertz to kilohertz in a spreadsheet
To convert a whole column of hertz in Excel or Google Sheets, put the hertz in column A and type =A1/1000.0 in the first cell of column B, then fill the formula down. To go back from kilohertz to hertz, use =A1*1000.0. The rule is the same as on paper: divide the number of hertz by about 1,000. Check one row against this converter before you trust the whole column.
Rounding the answer
The converter shows up to six significant digits so that nothing is lost, but most real measurements don't need that much precision. Quote only as many digits as your original measurement supports. Always convert the full figure first and round only the final answer.
Reading the table of units
Under the main answer, the converter lists the same amount in other frequency units. You don't need a second converter if a form, a label or a teacher asks for a different unit: read it straight from the table. Change the From and To lists to make any of those units the main answer instead, or press Swap units to reverse the direction.
Checking your answer
A quick sense check catches most slips. The number of kilohertz should be about 1,000 times smaller than the number of hertz. If your answer is far away from that, you may have multiplied when you should have divided.
Why exact conversions matter
Small errors in a conversion grow quickly when a figure is multiplied, shared or reused in another calculation. Using the exact definitions of the units, rather than a rounded rule of thumb, keeps results consistent between people, documents and software. This converter uses the defined relationship between hertz and kilohertz for every answer, so the same input always gives the same result, and you can copy it straight into a report, a spreadsheet or a homework answer. When you share a converted figure, give its unit and say how you rounded it, so anyone can check your working.
Quick reference
One hertz is 0.001 kHz. Ten hertz is 0.01 kHz. One kilohertz is 1,000 Hz.
Common mistakes
- Multiplying instead of dividing. Check whether your answer should be larger or smaller.
- Dropping digits. Round only at the end.
- Mixing up similar units. Read the symbols carefully.
Related converters
Try the angle converter, the power converter all units and the time converter.
What next
Use this often? Add Frequency to your Home screen.
Frequently asked questions
How does the frequency converter work?
It uses the fixed relationship between the two units: one hertz is exactly a set fraction or multiple of one kilohertz.
How many kilohertz are in a hertz?
One hertz is about 0.001000 kilohertz.
How many hertz are in a kilohertz?
One kilohertz is about 1,000 hertz.
How do I convert kilohertz to hertz?
Press Swap units, then enter the number of kilohertz.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.