Saved

Press the star next to a tool's name to save it.

All my tools

Mph to Mach Converter

Enter a speed in miles per hour. The mph to Mach converter divides it by the speed of sound, 761.2 mph at 59 °F, or at the air temperature you enter, and works the other way too.

Restored your last values ·

If you leave the temperature blank, the standard sea-level value of 59 °F (15 °C) is used.

–

Enter a speed to convert.

The mph to Mach converter tells you how a speed in miles per hour compares with the speed of sound. Mach 1 is the speed of sound, Mach 2 is twice that, and Mach 0.8 is 80% of it. At sea level on a standard 59 °F day, sound travels at about 761 mph, so 500 mph is about Mach 0.66. Enter a speed, add the air temperature if you know it, and you get the Mach number, or switch direction to turn a Mach number into miles per hour.

How to convert mph to Mach

Divide the speed by the speed of sound in the same unit:

Mach = speed in mph ÷ speed of sound in mph

At 59 °F, Mach = mph ÷ 761.2. For example, 1,000 mph ÷ 761.2 = Mach 1.31. To go the other way, multiply: Mach 2 × 761.2 = about 1,522 mph.

How to use the mph to Mach converter

  1. Enter a speed in miles per hour.
  2. Add the air temperature if you know it, in °F or °C. Leave it blank to use the standard sea-level value of 59 °F.
  3. Press Convert to see the Mach number, the speed of sound at that temperature, the same speed in km/h and m/s, and whether it’s subsonic, transonic, supersonic or hypersonic.
  4. Press Swap direction to convert Mach to mph instead.

Why the speed of sound changes

Sound travels faster in warm air and slower in cold air. In dry air it depends almost only on temperature, not directly on pressure or altitude. The converter uses c = √(γ × R × T), where γ = 1.4 for air, R = 287.05 J/(kg·K) and T is the absolute temperature. That’s why a jet flying at the same mph has a higher Mach number at cruising altitude, where the air is far colder than on the ground.

Air temperatureSpeed of sound
86 °F780.8 mph
68 °F767.8 mph
59 °F (standard sea level)761.2 mph
32 °F741.1 mph
−40 °F684.7 mph
−69.7 °F (cruise altitude, about 36,000 ft)660.0 mph

Mph to Mach chart (59 °F)

SpeedMach
60 mph0.079
200 mph0.263
500 mph0.657
761 mph1.00
1,000 mph1.31
1,350 mph1.77
2,000 mph2.63
3,806 mph5.00

Speed ranges

  • Subsonic, below Mach 0.8: cars, trains, helicopters and propeller planes.
  • Transonic, Mach 0.8 to 1.2: airliners cruise near the bottom of this range, where shock waves start to form over parts of the wing.
  • Supersonic, Mach 1.2 to 5: fighter jets and the retired Concorde, which cruised at about Mach 2.
  • Hypersonic, above Mach 5: rockets, re-entering spacecraft and experimental aircraft.

Real-world examples

A passenger jet cruising at about 560 mph at 36,000 feet, where the air is around −70 °F, is flying at about Mach 0.85. The same 560 mph at sea level would be only Mach 0.74. Concorde’s Mach 2 cruise high up worked out to about 1,320 mph.

Converting Mach to mph

To turn a Mach number into miles per hour, press Swap direction and enter the Mach number. The converter multiplies it by the speed of sound at your temperature. Remember that the answer depends on the air: a jet that tops out at Mach 2 reaches a higher mph on a warm day near the ground than it does in the thin, freezing air high up.

Ground speed and airspeed

Mach number depends on how fast an aircraft moves through the air around it, its true airspeed, not its speed over the ground. A strong tailwind from the jet stream can push a plane’s ground speed far above its airspeed without changing its Mach number. If you enter a ground speed from a flight tracker, the result is only an estimate.

Is it accurate?

The converter assumes dry air behaving as an ideal gas, the standard method in aviation and physics textbooks. Humidity raises the speed of sound very slightly, by well under 1% in normal weather, so the results are accurate enough for homework, aviation trivia and general use.

Who uses Mach numbers?

Pilots, engineers and aviation fans use Mach numbers because the way air flows around an aircraft changes as it nears the speed of sound. Close to Mach 1, shock waves form and drag rises sharply, so the Mach number tells engineers more about how a plane will behave than its speed in mph does. Airliners show both airspeed and Mach number in the cockpit, and at high altitude pilots usually fly a set Mach number rather than a set speed.

Common mistakes

  • Using one fixed value for Mach 1. The often-quoted 767 mph is the speed of sound at about 68 °F. At 59 °F it’s about 761 mph, and at cruising altitude about 660 mph.
  • Mixing up units. Make sure the speed is in mph and not knots or km/h before you convert. One knot is about 1.15 mph.
  • Forgetting the temperature unit. If you enter a temperature, check that the unit is set to °F or °C to match it.

Mach numbers in the cockpit

At high altitude, airliners are flown at a set Mach number rather than a set speed in miles per hour, because the margin before shock waves form depends on Mach, not mph. That’s why a flight plan may list a cruise of Mach 0.78 or 0.85 instead of a speed.

Convert between other speed units with the speed converter or the mph to kph converter, or use the km/h to Mach converter for kilometers per hour.

What next

Use this often? Add Mph to Mach to your Home screen.

Frequently asked questions

How does the mph to Mach converter work?

It divides your speed in mph by the speed of sound in mph at the air temperature you enter, or at the standard 59 °F if you leave it blank.

How fast is Mach 1 in mph?

About 761 mph at sea level on a 59 °F day. In the cold air at cruising altitude it’s about 660 mph.

How fast is Mach 2 in mph?

About 1,522 mph at sea level, or about 1,320 mph at cruising altitude, where the air is colder.

Is Mach a unit of speed?

Not quite. It’s a ratio: your speed divided by the speed of sound in the air around you, so the same mph can be a different Mach number.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters