A cycling breakaway calculator estimates how far a peloton must ride to catch a group of riders that has gone ahead. Enter the number of riders in the breakaway, the time gap, and the speed of the breakaway and of the peloton, and the calculator gives the distance that the peloton needs and the time it takes. It uses the breakaway-catch equation devised by a Belgian professor and reported by Cyclingnews, and it runs in your browser.
How to use the cycling breakaway calculator
- Choose US or metric units.
- Enter the number of riders in the breakaway. The equation is for fewer than 10.
- Enter the time gap between the breakaway and the peloton, in minutes.
- Enter the speed of the breakaway and the speed of the peloton.
- Press Work out the distance.
The equation
The distance that the peloton needs is the time gap, in hours, multiplied by the peloton speed, multiplied by a factor. The factor is six times the peloton speed, divided by three times the speed difference plus the square root of six times the peloton speed times the time gap times ten minus the number of riders, plus nine times the square of the speed difference, and then one is subtracted. The calculator converts your minutes to hours for you. The speeds can be in miles per hour or in kilometers per hour, and the distance comes out in miles or in kilometers to match.
A worked example
The worked example has 8 riders in the breakaway, riding at 20 kilometers per hour, with a gap of 40 minutes to a peloton riding at 30 kilometers per hour. The equation gives a distance of about 36.5 kilometers. At the peloton's speed of 30 kilometers per hour, this takes the peloton about 73 minutes, which the calculator also shows. In miles per hour, the same example is a breakaway at 12.4 miles per hour and a peloton at 18.6, and the distance is about 22.7 miles.
What the numbers mean
The result is the distance from the point where the peloton is a given time behind to the point where it catches the breakaway. If there are fewer kilometers left in the race than this, the breakaway has a chance of staying clear, and if there are more, the peloton should catch them first. The smaller the gap or the greater the speed difference, the sooner the catch. A larger breakaway can work better together, so the catch comes later, and the equation reflects this through the number of riders.
Why fewer than ten riders
Cyclingnews reports that once a breakaway group is larger than nine riders, its size no longer matters for the fatigue estimate, which grows more important below ten riders. This calculator therefore only works for fewer than ten riders and shows a message for larger groups. In a small group, fatigue matters more, since each rider has to take more turns at the front.
Limits of the model
Cyclingnews reports that the professor did not take into account the course profile, the wind or other parameters, and that the calculator proved rather accurate on the first two flat stages of the Tour. In a real race, a headwind can slow a breakaway, a hill can split a group, teams in the peloton may or may not want a catch, and the gap changes with every kilometer. Treat the result as a rough guide, useful for a race fan's intuition, and not as a forecast for a particular stage.
Trying different cases
The calculator is a good way to get a feel for how a race can develop. Keep the speeds the same and change the number of riders, and you will see that a larger breakaway needs a longer chase. Keep the riders the same and widen the gap, and the chase gets longer too. If the speed difference is small, the peloton needs a very long road to close even a small gap, which is why a breakaway that rides almost as fast as the peloton can stay away for a long time. If the peloton is much faster, the catch comes quickly.
Reading the result against the race
To use the result, compare it with the distance that is left in the race. Suppose that the calculator gives 36 kilometers and the finish is 30 kilometers away. In the model, the breakaway reaches the line before it is caught. If the finish is 60 kilometers away, the catch should come with about 24 kilometers to go. Real races are less tidy, since the gap changes with the wind and the road, but the comparison is a handy rule of thumb for fans and commentators.
For riders and teams
Riders in a break can use the idea to judge how hard they need to work to stay clear, and teams in the peloton can judge how hard to chase. Remember that the model assumes that everyone rides at constant speeds, which is not true in a real race. Treat the numbers as a starting point for discussion, and trust the information that you get from the race radio and your team car for real decisions.
Common mistakes
- Entering the gap in hours. The calculator expects minutes.
- Swapping the speeds. The peloton must be the faster group.
- Using a group of ten or more. The equation is for fewer than ten.
- Expecting a forecast. It is a simple model for flat roads.
What next
Use this often? Add Cycling Brea to your Home screen.
Frequently asked questions
What is a cycling breakaway calculator?
A tool that estimates the distance a peloton needs to ride to catch a smaller group of riders ahead of it.
What do I need to enter?
The number of riders in the breakaway, the time gap in minutes, the speed of the breakaway and the speed of the peloton.
Who created the equation?
A Belgian professor devised it, and Cyclingnews reports that it was tried on flat stages of the Tour de France.
Why does it only work for fewer than ten riders?
Above nine riders the group's size no longer changes the fatigue estimate, so this calculator covers fewer than ten.
How accurate is it?
It is a simple model for flat stages and ignores wind, slope and tactics, so treat it as a guide.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.