A bike pace calculator works out your average speed, your pace per mile or kilometre, the time a ride will take or the distance you can cover. Enter any two of the distance, the speed and the time, and the calculator gives the third, along with your pace. It works in miles or kilometres and runs in your browser, so nothing you enter is sent anywhere.
Speed, distance and time
Wikipedia explains that speed is the distance covered per unit of time, which in equation form is speed equals distance divided by time. For average speed, divide the total distance by the time interval: 80 kilometres in one hour is 80 kilometres per hour, and so is 320 kilometres in four hours. Distance is then the average speed times the time. This calculator uses these relationships, and it adds the pace, which is the time taken for one mile or one kilometre.
How to use the bike pace calculator
- Choose US (miles) or Metric (kilometres).
- Choose what to find: the speed and pace, the time, or the distance.
- Enter the other two values. Enter the time in hours, minutes and seconds.
- Press Calculate.
Pace on a bike
Runners usually think in pace, which is minutes per mile or kilometre, and cyclists in speed. The two are linked: the pace in minutes per mile is 60 divided by the speed in miles per hour. At 15 miles per hour the pace is 4 minutes a mile. At 24 kilometres per hour it is 2 minutes 30 seconds a kilometre. The calculator shows both, which helps if you also run or swim and like to compare efforts.
Worked examples
You ride 20 miles in 1 hour 30 minutes. The time is 1.5 hours, so the average speed is 20 divided by 1.5, which is 13.3 miles per hour. The pace is 60 divided by 13.33, which is 4 minutes 30 seconds per mile, and the distance is 32.2 kilometres. To plan a ride, if you want to cover 40 kilometres at 25 kilometres per hour, the time is 40 divided by 25, which is 1.6 hours, or 1 hour 36 minutes. And if you ride at 15 miles per hour for 2 hours 30 minutes, you cover 15 times 2.5, which is 37.5 miles.
Miles and kilometres
The calculator converts between units for you, using 1 mile as 1.609344 kilometres. A speed of 20 miles per hour is 32.2 kilometres per hour, and a distance of 40 kilometres is 24.9 miles. The result is shown in the unit you chose, and the other unit is shown as well so that you can compare your rides with a friend who uses different units.
Moving time and elapsed time
For an honest average speed, decide which time to use. The moving time is the time the wheels were turning. The elapsed time includes stops for traffic lights, food or photographs. A cycling computer usually shows the moving time. Your speed on the road is the distance over the moving time, but the speed of the whole trip is the distance over the elapsed time, and that is what matters when you plan your day.
Planning a ride
To plan a long ride, work out the speed you can hold for the whole distance, not your best short-effort speed. Hills, wind and traffic make the average lower than the speed on a flat road. Use your speed from similar rides to find the time, add time for stops, and leave a margin so that you finish before dark.
Speed to pace table
It helps to know a few pairs by heart. At 10 miles per hour the pace is 6 minutes a mile, at 12 miles per hour it is 5 minutes, at 15 it is 4 minutes, at 20 it is 3 minutes and at 24 it is 2 minutes 30 seconds. In kilometres, 20 kilometres per hour is 3 minutes a kilometre, 25 is 2 minutes 24 seconds and 30 is 2 minutes. The calculator does these for any speed.
Finishing time for common distances
The time for a ride is the distance divided by the speed. At 15 miles per hour, a 25 mile ride takes 25 divided by 15, which is 1.67 hours, or 1 hour 40 minutes. A 100 mile ride at the same speed takes 6 hours 40 minutes of moving time. At 25 kilometres per hour, a 100 kilometre ride takes 4 hours. Use the calculator to try your own speed, then add the time you expect to spend stopped.
Negative splits and even pacing
Pace is not always even. A ride into the wind will be slower than the ride home, and hills lower the average speed. To compare the two halves of a ride, enter the distance and time of each half and compare the paces. Riding the first half a little slower than the second, which is called a negative split, is one way to avoid running out of energy, and the calculator shows how much difference you are making.
Common mistakes
- Mixing minutes and hours. Enter the time as hours, minutes and seconds.
- Mixing units. Choose miles or kilometres and keep to it.
- Using the top speed. Use the average speed.
- Ignoring stops. Use the elapsed time if you want the pace of the whole trip.
What next
Use this often? Add Bike Pace to your Home screen.
Frequently asked questions
What is a bike pace calculator?
A tool that works out cycling speed, pace, time or distance from any two of the distance, the speed and the time.
How do I calculate my average cycling speed?
Divide the distance by the time. 20 miles in 1.5 hours is about 13.3 miles per hour.
How do I convert speed to pace?
Pace in minutes per mile is 60 divided by the speed in miles per hour. At 15 miles per hour it is 4 minutes per mile.
How long will a 40 km ride take at 25 km/h?
40 divided by 25 is 1.6 hours, or 1 hour 36 minutes.
Should I use moving time or elapsed time?
Use moving time for your speed on the road and elapsed time for the pace of the whole trip.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.