A marathon pace calculator turns a goal finish time into the pace you need to run, or a pace into the time you'll finish. Choose the marathon, half marathon, 10K, 5K or any distance, enter your target time or pace, and this marathon pace calculator gives your pace per mile and per kilometer, your average speed and a full table of even-pace splits for every mile or kilometer. Pace per mile is the default, with kilometers one tap away.
How the marathon pace calculator works
Pace is time divided by distance, and finish time is pace multiplied by distance:
- Pace = finish time ÷ distance
- Finish time = pace × distance
The marathon is 42.195 kilometers, about 26.22 miles, so a marathon pace is your finish time divided by 26.22 miles or 42.195 kilometers. A half marathon is half that, 21.0975 kilometers or about 13.1 miles. The calculator uses 1.609344 kilometers per mile.
Worked example: a 4-hour marathon
- 4:00:00 is 240 minutes.
- Per mile: 240 ÷ 26.22 ≈ 9.15 minutes, or 9:09 per mile.
- Per kilometer: 240 ÷ 42.195 ≈ 5.69 minutes, or 5:41 per km.
- Average speed: about 6.55 mph.
Going the other way, a steady 9:00 per mile carries you to the marathon finish in about 3:55:58.
Even-pace splits
The splits table shows where you should be at every mile or kilometer if you run at exactly the same pace from start to finish, ending with your finish time. Many runners print it or copy a few key splits, such as halfway, onto a pace band. If you're slightly behind at a checkpoint, small changes over the next few miles bring you back on track without a sudden surge.
Common goal paces
| Marathon finish | Per mile | Per km |
|---|---|---|
| 3:00:00 | 6:52 | 4:16 |
| 3:30:00 | 8:01 | 4:59 |
| 4:00:00 | 9:09 | 5:41 |
| 4:30:00 | 10:18 | 6:24 |
| 5:00:00 | 11:27 | 7:07 |
How to use the marathon pace calculator
- Choose whether to find your pace or your finish time.
- Pick the race, or choose Custom and type a distance.
- Choose miles or kilometers.
- Type the finish time or the pace, using colons.
- Press Calculate and read the pace, speed and splits.
Run, walk or both
A marathon can be finished by running or with a run/walk strategy, and many races also have wheelchair divisions. If you plan to walk for part of each mile, your average pace still has to match the result here, so the running parts will be faster. Enter your overall goal and use the average as your target across each full mile.
Training for the distance
Long-distance training builds up gradually over many weeks. The CDC says adults need 150 minutes of moderate or 75 minutes of vigorous activity a week, plus muscle-strengthening activity on two or more days; marathon training goes well beyond that, so increase your weekly mileage slowly, include rest days and talk to a doctor if you have a health condition.
Choosing a realistic goal
The best guide to a marathon goal is a recent race over a shorter distance, run at a hard but steady effort. A half marathon or 10K from the last couple of months shows what pace you can hold today. Your marathon pace will be slower than your half marathon pace, because the distance is twice as long, so be honest with yourself about how your long training runs have felt. A goal that you can hold comfortably for the first half is usually a goal you can finish.
If this is your first marathon, consider making the finish line the goal and using the calculator to plan a comfortable, even pace rather than a target time. You can always run faster next time, once you know how your body handles the last six miles.
Pacing on race day
The first few miles often feel easy because you're rested and excited, which tempts many runners to go out too fast. Check your watch against the splits table at each mile marker, and aim to be within a few seconds of your planned pace. Hills, wind, heat and crowded water stations all slow you down a little, so judge your pace by effort on the climbs and let it come back on the downhills rather than chasing every second.
Using the splits on a pace band
A pace band is a strip of paper or a wristband with your target time at each mile or kilometer. Copy the most useful splits from the table, such as every five miles and the halfway point, so you can check your progress at a glance without doing sums while you run. If you're ahead or behind at a checkpoint, spread the difference over the next few miles instead of changing pace suddenly.
Treadmill and track pacing
Treadmills usually show speed rather than pace. Use the average speed in mph or km/h from the result to set the treadmill for your goal pace. On a standard 400 meter track, about four laps make one mile, so divide your pace per mile by four for a rough lap time.
Common mistakes
- Using 26 miles instead of 26.2. The last 0.2 miles adds about two minutes at a 9:00 pace.
- Starting too fast. Even pacing is usually faster overall than a quick start and a slow finish.
- Typing 4.5 for 4:30:00. Use colons; a single number is read as minutes.
What next
Use this often? Add Marathon Pac to your Home screen.
Frequently asked questions
How does the marathon pace calculator work?
It divides your finish time by the distance to get pace, or multiplies pace by distance to get the finish time, using 42.195 km (about 26.22 miles) for the marathon.
What pace is a 4-hour marathon?
About 9:09 per mile, or 5:41 per kilometer.
How far is a marathon?
42.195 kilometers, about 26.22 miles. A half marathon is half that, about 13.1 miles.
What finish time does a 9-minute mile give?
A steady 9:00 per mile finishes a marathon in about 3:55:58.
Can I use it for other distances?
Yes. Choose half marathon, 10K, 5K, or Custom and type any distance in miles or kilometers.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.