Saved

Press the star next to a tool's name to save it.

All my tools

Cycling Wattage Calculator

Use this cycling wattage calculator to estimate the power in watts needed to ride at a steady speed, from your speed, weight, grade, drag area and rolling resistance.

Restored your last values ·

%
%

Enter your speed, the weight of you and the bike together, the road grade, and your drag area (CdA) and rolling resistance (Crr). Add a headwind if there is one. The calculator works out the power you need at a steady speed.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Fill in the boxes and press Calculate watts.

See full result

A cycling wattage calculator estimates the power you need to ride at a steady speed, in watts, from your speed, your weight, the slope of the road and the drag of you and your bike. It shows how much of the power goes against the air, the tyres and gravity. It runs in your browser and nothing you enter is sent anywhere.

The physics of cycling power

Wikipedia's article on bicycle performance sets out the power a rider needs. It is the sum of the power spent against air drag, against rolling resistance and against gravity when climbing, and then divided by the efficiency of the drivetrain, because some power is lost between the pedals and the wheel. At a steady speed there is no power for acceleration, so this calculator leaves it out.

How to use the cycling wattage calculator

  1. Choose US or Metric units.
  2. Enter your speed and the weight of you and the bike together.
  3. Enter the road grade as a percent. Use a negative number for a descent.
  4. Enter your drag area (CdA) and rolling resistance (Crr).
  5. Optionally enter a headwind, the drivetrain efficiency and the air density, then press Calculate watts.

The three forces

The article gives the air drag power as half the air density times the cube of the speed times the drag area, CdA, which is the drag coefficient times the frontal area. With a headwind it uses the apparent wind speed, which is your speed plus the headwind, squared, times your road speed. Rolling resistance power is the speed times the weight times gravity times the rolling resistance coefficient, Crr. Climbing power is the speed times the weight times gravity times the sine of the slope angle. The article uses 9.8 for gravity and an air density of about 1.225 kilograms per cubic metre at sea level and 15 °C.

Choosing CdA and Crr

The article says that, for typical upright riding, the drag coefficient is about 1, with the area being the cross-sectional area of the rider and bike, and it gives no ready figure for riders in different positions. Your CdA is the figure to enter, and it is largest sitting upright and smaller in a tuck or on aero bars. For rolling resistance, the article quotes roller-test coefficients of 0.003 to 0.006 at low speed for tyres at their maximum recommended pressure, rising by about half at 10 metres per second. The example values in the boxes are only examples, so use your own figures.

Drivetrain efficiency

The article says that up to 99 percent of the rider's power can reach the wheel with a clean chain at 400 watts, and gives gearing losses of 1 to 7 percent for clean, lubricated derailleurs with a straight chainline. The calculator uses 97 percent if you leave the box blank. Enter 100 if you want the power at the wheel instead of at the pedals.

Worked example

A rider and bike together weigh 90 kilograms and ride at 32.4 kilometres per hour, which is 9 metres per second, on the flat, with a CdA of 0.4 square metres, a Crr of 0.005 and no wind or drivetrain loss. The drag power is 0.5 times 1.225 times 9 cubed times 0.4, which is 178.6 watts. The rolling power is 9 times 90 times 9.8 times 0.005, which is 39.7 watts. The total is 218.3 watts, of which 82 percent goes against the air. On a 7 percent climb at 15 miles per hour with a total weight of 190 pounds, the climbing power is about 395 watts, and the drag only about 15 percent of the total.

Why speed costs so much on the flat

Because the drag power depends on the cube of the speed, going faster takes much more power. Doubling the speed takes eight times the drag power. That is why most of the power goes against the air on the flat, and why the Wikipedia article's worked examples show drag taking more than three quarters of the power at 9 metres per second on the flat but only a few percent on a steep climb at a low speed.

Downhill and tailwinds

On a descent the gravity term is negative, because gravity helps. If the total comes out at zero or below, the calculator says you could coast, and it shows the pedal power as zero. A tailwind lowers the apparent wind and so the drag. Use a negative number for the wind to model it.

Power and weight

Climbing power depends directly on the total weight of the rider and bike, and the drag power does not. That is why lighter riders climb faster for the same power, while on the flat the shape of the rider matters more. The calculator shows all three components, so you can see how much the weight matters on a hill. Enter the same speed and grade with a different weight to see the effect.

Power at your threshold

The Wikipedia article refers to the power a rider can hold for about an hour, which it links to their functional threshold power. It quotes power per kilogram of body mass of about 1.0 watt per kilogram for a novice woman, 2.2 for an average untrained man, 3.0 for a person in good fitness and 6.6 for top-class men. Use the calculator to see the speed that your own sustained power gives on a hill of a given grade, by trying speeds until the power matches your figure.

Common mistakes

  • Using the rider's weight only. Add the bike and your kit.
  • Using a guessed CdA. The result is only as good as the figure you enter.
  • Mixing units. Choose US or Metric first.
  • Expecting it to match a power meter exactly. It is a model of steady riding.

What next

Use this often? Add Cycling Watt to your Home screen.

Frequently asked questions

What is a cycling wattage calculator?

A tool that estimates the power in watts needed to ride at a steady speed, from the physics of drag, rolling resistance and climbing.

How do you calculate the power needed to cycle?

Add the power against air drag, rolling resistance and gravity, then divide by the drivetrain efficiency, as set out in Wikipedia's article on bicycle performance.

Why does going faster take so much more power?

Air drag power depends on the cube of the speed, so doubling your speed takes eight times as much power against the air.

What is CdA?

The drag coefficient times the frontal area. It is the main figure for air drag and depends on your position.

Can I coast downhill?

Yes. If gravity supplies more power than drag and rolling resistance take, the calculator says you can coast.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters