Saved

Press the star next to a tool's name to save it.

All my tools

Ft/s to Mach Converter

Enter a speed in feet per second, and this ft/s to Mach converter divides it by the speed of sound. Add the air temperature for a more accurate answer, or swap to go the other way.

Restored your last values ·

If you leave the temperature blank, the standard sea-level value of 59 °F (15 °C) is used.

–

Enter a speed to convert.

To convert ft/s to Mach, divide the speed in feet per second by the local speed of sound. Enter your speed, and this ft/s to Mach converter does that for you, using the speed of sound at standard sea-level conditions of 59 °F, or at any air temperature you choose. A speed of 1,000 ft/s at 59 °F is about Mach 0.896. Press Swap direction to turn a Mach number back into feet per second. Unlike most unit conversions, this one isn't a fixed factor, because Mach depends on the air around the object.

Ft/s to Mach formula

Mach = speed ÷ speed of sound

The speed of sound in dry air can be found from its absolute temperature:

c = √(1.4 × 287.05 × T)

Here, c is the speed of sound in meters per second and T is the temperature in kelvins. The calculator then converts the result to feet per second, using the exact definition that one foot is 0.3048 meters.

How to use the ft/s to Mach converter

  1. Enter the speed in feet per second.
  2. Add the air temperature if you know it, or leave it blank for standard conditions.
  3. Choose °F or °C.
  4. Press Convert.
  5. Press Swap direction to convert a Mach number to ft/s.

What is the Mach number?

The Mach number is a dimensionless quantity in fluid dynamics. It is the ratio of the speed of a flow past a boundary to the local speed of sound, and it's named after the Austrian physicist and philosopher Ernst Mach. At Mach 1, the speed is equal to the speed of sound. At Mach 0.65, it's 65% of the speed of sound. Since it's a ratio, Mach has no units of its own.

Why temperature changes the answer

The speed of sound in air varies with the square root of the absolute temperature. At 20 °C, or 68 °F, it's about 343 meters per second, or 1,125 ft/s. At 0 °C, it falls to around 331 meters per second, or 1,086 ft/s. So the same speed in ft/s gives a higher Mach number in cold air. That's why an aircraft at high altitude, where the air is much colder, reaches a given Mach number at a lower true speed than one near the ground.

Worked examples

At the standard 59 °F, the speed of sound is about 1,116.4 ft/s. A speed of 1,000 ft/s is therefore 1,000 ÷ 1,116.4, or about Mach 0.896. At Mach 2, the speed would be about 2,233 ft/s. If the air is colder, at 0 °F, the speed of sound falls to around 1,051 ft/s, and the same 1,000 ft/s becomes about Mach 0.95.

Speed ranges

RangeMach number
SubsonicBelow 0.8
Transonic0.8 to 1.2
Supersonic1.2 to 5
HypersonicAbove 5

In the transonic range, airflow over some parts of an aircraft is moving faster than sound while it's slower over other parts, and that makes this range difficult from a design point of view. These boundaries are approximate conventions and aren't sharp lines.

Who uses this conversion?

Feet per second is a common unit in aviation, ballistics and American engineering, so it often needs to be compared to the speed of sound. Pilots and aerospace students deal with Mach numbers every day. Shooters and ballistics enthusiasts sometimes want to know if a projectile is subsonic or supersonic, since crossing the speed of sound can affect both accuracy and noise. Physics students also use the formula when they are working on sound and compressible flow.

Limits of the calculation

The formula assumes dry air that behaves as an ideal gas. Humidity has a small effect on the speed of sound, and it isn't included here. For real flight planning, use your aircraft's instruments and official atmospheric data. Remember, too, that this tool needs the temperature of the air at the object's altitude, which is often much lower than at the ground.

Why isn't there a fixed factor?

A conversion such as feet to meters never changes, since both units are defined exactly. Mach is different, because one of the two values in the ratio is the speed of sound where the object happens to be. That speed changes with temperature, so the same reading in feet per second can correspond to several Mach numbers. It's why a converter that offers a single fixed factor can only be correct at one temperature. Entering the local air temperature here removes that assumption and gives a figure that fits your conditions much better.

Rough mental math

At ordinary temperatures, the speed of sound is a little over 1,100 feet per second. So for a quick estimate, divide your speed by 1,100. A speed of 2,200 ft/s is close to Mach 2, while 550 ft/s is about Mach 0.5. On a cold day or at altitude, the true Mach number will be a little higher than this.

Common mistakes

  • Treating Mach as a fixed speed. It depends on temperature.
  • Using ground temperature at altitude. Use the local air temperature.
  • Confusing ft/s with fps as frames. Here, fps means feet per second.

Change other speed units with the speed converter, work through motion problems with the velocity calculator, and convert your temperature with the temperature converter.

What next

Use this often? Add Ft/s to Mach to your Home screen.

Frequently asked questions

How does the ft/s to Mach converter work?

It divides your speed in feet per second by the local speed of sound. At 59 °F, that is about 1,116.4 ft/s.

Why does the temperature matter?

The speed of sound in air varies with the square root of absolute temperature.

How many ft/s is Mach 1?

About 1,116.4 ft/s at 59 °F, and less in colder air.

Does Mach have units?

No. It is a ratio of two speeds.

Can I convert Mach to ft/s?

Yes. Press Swap direction and enter the Mach number.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters