A pounds per minute calculator gives a mass flow rate: how many pounds of a substance pass a point each minute. Enter the weight and the time, or the density, the volume and the time, or convert a rate that you already have between pounds per minute, pounds per hour, kilograms per second, kilograms per minute and kilograms per hour.
How to use the pounds per minute calculator
- Choose what you know.
- Choose US or metric units.
- Enter the values. The time is in minutes.
- Press Calculate and read the rate in every unit.
What pounds per minute means
Pounds per minute, often written PPM or lb/min, is a mass flow rate. It says how much mass moves past a point in one minute. It equals the mass divided by the time, PPM = W ÷ t, where the weight W is treated as mass. Wikipedia defines the mass flow rate as the flow of mass through a surface per unit of time, the limit of Δm ÷ Δt, which equals dm ÷ dt [1]. Its SI unit is the kilogram per second [1].
Weight and time
In the first mode, enter the mass that flowed and the time it took in minutes. For example, if the rate is 5 pounds per minute and the flow lasts 0.3 minutes, the mass is 1.5 pounds. The calculator reverses this: 1.5 pounds in 0.3 minutes gives 5 pounds per minute, which is 300 pounds per hour or 0.0378 kilograms per second. The weight is treated as mass.
Density, volume and time
If you know a volume rather than a mass, use the density mode. The mass is the density times the volume, and the rate is that mass divided by the time. Wikipedia gives the same relation in its form m = ρ times the volumetric flow rate [1]. For example, 10 cubic feet of water at 62.4 pounds per cubic foot in 2 minutes is 312 pounds per minute.
Converting a rate
The third mode converts a rate that you have into the others. It uses the exact definition of the pound, 1 lb = 0.45359237 kg [2], together with 60 seconds in a minute and 60 minutes in an hour. To get kilograms, divide by 2.20462, and divide again by 60 for kilograms per second, which is the same as multiplying by about 0.00756. For 100 pounds per minute the result is 0.756 kilograms per second.
The units in the table
Each result shows five units: pounds per minute, pounds per hour, kilograms per minute, kilograms per second and kilograms per hour. The hour figures are the minute figures times 60. Pounds per hour is common in steam and boiler work, kilograms per hour in process plants, and kilograms per second in physics. Having all five in one line saves a second conversion when you compare data sheets from different countries.
US and metric inputs
In US mode, the weight is in pounds, the density in pounds per cubic foot and the volume in cubic feet. In metric mode, they are in kilograms, kilograms per cubic metre and cubic metres. The logic is the same; only the unit of the mass changes, and the calculator converts it with the exact pound definition. The time is always in minutes, and the headline result is always given in pounds per minute.
Cubic feet per minute
You can also convert between cubic feet per minute and pounds per minute: multiply the cfm by the density in pounds per cubic foot to get pounds per minute, and divide to go back [1]. The density mode here does the same thing for a volume and a time. The calculator gives no density values for air, water or gasoline, so it asks you to enter the density that applies to your substance and conditions.
Why density matters
The same volume flow carries a different mass for each substance and for each temperature. A gas is much lighter than a liquid, and its density changes with pressure and temperature. If you use the density mode, take the value for the conditions at the point where you measure the volume. Water at room temperature is close to 62.4 pounds per cubic foot, which is the figure used in our example; check a data sheet for any other substance.
Where it is used
Mass flow rates in pounds per minute appear in the specifications of burners, fuel and chemical feed systems, compressors and air handlers, and in the supply rates of materials to a machine. The mass flow rate matters because the mass is conserved through a pipe or a duct, while the volume changes with density. Wikipedia notes the continuity equation, ρ₁v₁A₁ = ρ₂v₂A₂, which expresses this [1].
Limits
The calculator assumes a steady flow, so that the rate is the same during the whole time. It converts and divides only; it does not size a pipe, a pump or a nozzle. For a gas, the density depends on the temperature and pressure, and an error there passes straight into the answer. Check the units of every number, since a confusion between pounds and pounds-force, or between volume and mass, is the usual cause of a wrong result.
Common mistakes
- Using weight as a force. Pounds here are a mass.
- Using a density for the wrong temperature. The mass flow changes with it.
- Mixing minutes and hours. The time box is in minutes.
- Mixing US and metric densities. Pick one system for all boxes.
What next
Use this often? Add Pounds per M to your Home screen.
Frequently asked questions
What is a pounds per minute calculator?
A tool that finds a mass flow rate in pounds per minute from a weight and a time or from a density and a volume.
How do you calculate pounds per minute?
Divide the weight in pounds by the time in minutes.
How many kg/s is one pound per minute?
About 0.00756 kilograms per second.
How do you convert cfm to pounds per minute?
Multiply the cubic feet per minute by the density in pounds per cubic foot.
Is weight the same as mass here?
Yes, the flow rate uses the mass of the substance.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.