A kinematic viscosity of air calculator finds how quickly air flows under its own weight, relative to its density, from its pressure and temperature. Enter the absolute pressure and the temperature. It gives the density, the dynamic viscosity and the kinematic viscosity, which is the figure used in the Reynolds number.
How to use the kinematic viscosity of air calculator
- Choose US or metric units.
- Enter the absolute pressure and the temperature of the air.
- Press Calculate.
Kinematic and dynamic viscosity
The Wikipedia article defines the kinematic viscosity as the ratio of the dynamic viscosity μ to the density ρ of the fluid [1]. That is ν = μ ÷ ρ. The dynamic viscosity measures the internal friction of the fluid, in pascal seconds. Dividing by the density gives a figure in square metres per second, which describes how fast momentum diffuses through the fluid and appears in the Reynolds number, and in the design of ducts and pipes.
Step one: the density
The density of the air follows from the ideal gas law, ρ = P ÷ (R T) [2]. The specific gas constant for air is 287.05 joules per kilogram kelvin [2]. The pressure must be absolute, in pascals, and the temperature in kelvin. At 1 bar and 50 degrees Celsius, which is 323.15 kelvin, the density is about 1.078 kilograms per cubic metre.
Step two: the dynamic viscosity
The calculator uses the dynamic viscosity of air μ = 1.458 × 10⁻⁶ × T^(3/2) ÷ (T + 110.4), in pascal seconds, with the temperature in kelvin. The 1.458 × 10⁻⁶ and the 110.4 are empirical constants for air that the tool uses as its own fitted values. The form is Sutherland's formula, which Wikipedia writes as μ = μ₀ (T ÷ T₀)^(3/2) × (T₀ + S) ÷ (T + S) [1].
Step three: the kinematic viscosity
The kinematic viscosity follows by dividing: ν = μ ÷ ρ, in square metres per second [1]. At 1 bar and 50 degrees Celsius, the calculator gives a dynamic viscosity of 1.9536 × 10⁻⁵ pascal seconds and a kinematic viscosity of 1.8121 × 10⁻⁵ square metres per second.
A value at 20 degrees Celsius
At 20 degrees Celsius and 101.325 kilopascals, the metric mode gives a kinematic viscosity of 1.506 × 10⁻⁵ square metres per second. In centistokes that is about 15.06, since 1 centistokes is 10⁻⁶ square metres per second [3].
Why the temperature matters so much
The viscosity of a gas rises with the temperature, unlike that of a liquid, but the density falls, so the kinematic viscosity rises quickly with the temperature. Pressure changes only the density, in this model, since the viscosity formula has no pressure term. Doubling the pressure halves the kinematic viscosity. The viscosity is often said to rise roughly as T^(3/2), which is only an approximation, since the full formula is not a pure power law [1].
Other units
One stokes is 10⁻⁴ square metres per second and 1 centistokes is 10⁻⁶ [3], and the calculator shows the centistokes value. In US mode, it also shows square feet per second and pounds per cubic foot. Those conversions, and the conversion of psi to pascals, are our own standard arithmetic. The dynamic viscosity is also given in centipoise, where 1 centipoise is 0.001 pascal seconds.
A different formula for air
The Wikipedia article on Sutherland's formula also gives a separate empirical formula for air, η = 2.791 × 10⁻⁷ × T^0.7355, in pascal seconds, which it says is accurate from −20 to 400 degrees Celsius [1]. This calculator does not use that formula. It uses the Sutherland form above. The two agree closely near room temperature, so the choice matters little there, but it shows that all such formulas are fits to measurements.
Limits of the model
The density comes from the ideal gas law, which is accurate for air at normal pressures and temperatures, but less so at very high pressures. We do not state a range of temperatures for the viscosity constants, so stay near ordinary air temperatures. Humidity is not included: moist air has a slightly lower density and a slightly different viscosity. For work on a wind tunnel, an engine or a high-altitude flight, use a model made for that case.
Using the calculator
Pick the units and enter the absolute pressure and the temperature. A gauge pressure of 30 psi is about 44.7 psi absolute at sea level, so add the atmospheric pressure first. Read the kinematic viscosity, and use it to find a Reynolds number as the speed times a length divided by this value. Compare 0, 20 and 50 degrees Celsius to see how much the value changes with temperature.
Comparing air at 0 and 100 degrees Celsius
Here is our own example at 101.325 kilopascals, using the formulas above. At 0 degrees Celsius, which is 273.15 kelvin, the density is 1.2923 kilograms per cubic metre and the dynamic viscosity is 1.716 × 10⁻⁵ pascal seconds. Dividing gives a kinematic viscosity of 1.328 × 10⁻⁵ square metres per second. At 100 degrees Celsius, which is 373.15 kelvin, the density falls to 0.9460 and the dynamic viscosity rises to 2.173 × 10⁻⁵, so the kinematic viscosity is 2.298 × 10⁻⁵. The viscosity of the air is 27 percent higher, but the kinematic value is 73 percent higher, because the density drops at the same time [1].
Common mistakes
- Entering gauge pressure. Use absolute pressure.
- Entering Celsius in US mode. Check the unit shown next to the box.
- Mixing up dynamic and kinematic viscosity. The kinematic one is the dynamic one divided by the density.
- Using the result for humid or very high pressure air. The model is for dry air as an ideal gas.
What next
Use this often? Add Kinematic Vi to your Home screen.
Frequently asked questions
What is a kinematic viscosity of air calculator?
A tool that finds the density and the viscosities of air from its pressure and temperature.
What is the kinematic viscosity of air at 20 °C?
About 1.506 × 10⁻⁵ m²/s at 101.325 kPa, or about 15.06 cSt.
How is the kinematic viscosity calculated?
ν = μ ÷ ρ, the dynamic viscosity divided by the density.
Does pressure change the dynamic viscosity of air here?
No. In this formula it only changes the density.
Should I use gauge pressure?
No. Use absolute pressure.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.