An isentropic flow calculator gives the ratios of temperature, pressure, density and area in a smooth, lossless gas flow, from the Mach number and the specific heat ratio. It is the basic tool for studying nozzles and ducts. Enter the Mach number, and add a stagnation pressure, temperature or throat area to get actual values.
How to use the isentropic flow calculator
- Choose US or metric units.
- Enter the Mach number, and the specific heat ratio if it is not 1.4.
- Add the stagnation pressure, stagnation temperature or throat area if you want actual values.
- Press Calculate.
What isentropic flow means
The Wikipedia article on isentropic nozzle flow describes a flow that is steady, uniform and isentropic, along a straight line, of an ideal gas [1]. Isentropic means that the entropy does not change, so there is no friction and no heat transfer. The gas is also calorically perfect, which means that the ratio of specific heats is constant over the temperature range [1]. Real nozzles come close to this when the walls are smooth and the flow is not disturbed.
Stagnation conditions
The stagnation, or total, conditions are those that the gas would reach if it were brought to rest without loss, and they are written with a zero subscript [1]. In an isentropic flow they stay constant along the duct. The static conditions, the temperature and pressure that a probe moving with the gas would read, change with the speed. The calculator gives the static values as fractions of the stagnation ones, and as actual numbers if you enter a stagnation pressure or temperature.
The temperature, pressure and density ratios
With b = 1 + (γ − 1) ÷ 2 × M², the stagnation-to-static ratios are T₀ ÷ T = b, p₀ ÷ p = b raised to γ ÷ (γ − 1), and ρ₀ ÷ ρ = b raised to 1 ÷ (γ − 1) [1]. The calculator shows the reciprocals, T ÷ T₀, p ÷ p₀ and ρ ÷ ρ₀, which is the form NASA uses [2]. At Mach 2 with γ = 1.4, b is 1.8, so T ÷ T₀ is 0.5556, p ÷ p₀ is 0.1278 and ρ ÷ ρ₀ is 0.2301.
The area ratio
The area ratio is A ÷ A* = (1 ÷ M) × [2 ÷ (γ + 1) + (γ − 1) ÷ (γ + 1) × M²] raised to (γ + 1) ÷ (2 (γ − 1)) [2]. A* is the throat area, where the flow is at Mach 1. At Mach 2, A ÷ A* is 1.6875, so a nozzle with a throat of 0.1 square metres needs an exit of 0.16875 square metres. The figure is our own use of the formula.
The throat ratios
At the throat, M is 1, and the critical ratios are T* ÷ T₀ = 2 ÷ (γ + 1), p* ÷ p₀ = (2 ÷ (γ + 1)) raised to γ ÷ (γ − 1), and ρ* ÷ ρ₀ = (2 ÷ (γ + 1)) raised to 1 ÷ (γ − 1) [1]. For air, γ = 1.4, they are about 0.528 for the pressure ratio, 0.833 for the temperature ratio and 0.634 for the density ratio [1]. The calculator shows these for the specific heat ratio that you enter.
The specific heat ratio
The usual value for air is γ = 1.4 [1]. The calculator uses 1.4 when you leave the box blank and shows the value on the result. Other gases have other values, and the ratio changes with temperature, so the constant-γ assumption is an approximation. Enter your own γ for a gas such as a monatomic one, as long as it is above 1.
A worked example
Take a flow at Mach 2 with a stagnation pressure of 0.69 bar, a stagnation temperature of 310 kelvin and a throat area of 0.1 square metres. The static pressure is 0.08819 bar and the static temperature is 172.22 kelvin. In metric mode, enter 2, 69 kilopascals, 36.85 degrees Celsius and 0.1 to see 8.8185 kilopascals and 172.22 kelvin.
Mach angle and regime
The Mach angle for supersonic flow is μ = arcsin(1 ÷ M) [3]. At Mach 2, this is 30 degrees. The calculator labels the flow as subsonic below Mach 1, sonic at 1 and supersonic above it. The same area ratio occurs at one subsonic and one supersonic Mach number, which is why a nozzle has a converging section and a diverging one. The calculator does not solve for the Mach number from an area ratio.
What the calculator leaves out
The tool does not model shock waves, friction, heat addition or a changing γ. Across a shock, the flow is not isentropic, and the stagnation pressure drops. It also does not give the mass flow rate, which would need a gas constant for the gas. Use a full gas dynamics tool for choked flow, normal shocks or real nozzle design.
Units
In US mode, pressure is in psi, temperature in degrees Fahrenheit and area in square feet. In metric mode, they are in kilopascals, degrees Celsius and square metres. The temperature is converted to kelvin for the formula, and shown back in your unit, with the kelvin value next to it. The ratios have no unit. The pressure and area results use the unit that you entered, so any other pressure or area unit works too if you read the number as such.
A subsonic example at Mach 0.5
Not every case is supersonic. Take air with γ = 1.4 at Mach 0.5. Here b = 1 + 0.2 × 0.25 = 1.05, so T ÷ T₀ = 1 ÷ 1.05 = 0.9524. The pressure ratio is 1.05 raised to −3.5, which is 0.8430, and the density ratio is 1.05 raised to −2.5, which is 0.8852 [1]. The area ratio is (1 ÷ 0.5) × (2 ÷ 2.4 + 0.4 ÷ 2.4 × 0.25) raised to 3, which is 1.3398 [2]. This is our own example. It shows that the gas cools and loses pressure only a little at low Mach numbers, and that the same duct area ratio of about 1.34 also fits a supersonic flow at a higher Mach number.
Common mistakes
- Using a Celsius or Fahrenheit value in the formula. Temperatures are converted to kelvin inside the tool.
- Entering a static pressure as the stagnation pressure. The input must be the total pressure.
- Assuming γ = 1.4 for every gas. Enter the value for your gas.
- Applying the result across a shock wave. The flow is not isentropic there.
What next
Use this often? Add Isentropic F to your Home screen.
Frequently asked questions
What is an isentropic flow calculator?
A tool that gives the temperature, pressure, density and area ratios of a lossless gas flow from the Mach number.
What is the isentropic temperature ratio?
T₀ ÷ T = 1 + (γ − 1) ÷ 2 × M², so T ÷ T₀ is its reciprocal.
What are the critical ratios for air?
For γ = 1.4: 0.528 for pressure, 0.833 for temperature and 0.634 for density.
What is A ÷ A*?
The ratio of the local flow area to the throat area, where the flow is at Mach 1.
Is the flow isentropic across a shock wave?
No. The entropy rises across a shock, so these formulas do not apply there.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.