Saved

Press the star next to a tool's name to save it.

All my tools

Insulation Calculator

This insulation calculator shows the R-value ENERGY STAR recommends for your attic or floor, and the depth and number of bags or rolls to buy for your area.

Restored your last values ·

Take the R-value per inch and the coverage at your target R-value from the product's label. Leave them blank to see just the R-value to add.

Everything is worked out in your browser. Nothing is uploaded.

Insulation to add

–

Choose your zone, enter the area and press Calculate.

See full result

An insulation calculator tells you how much insulation to add to an attic or floor. Choose your climate zone and where you're insulating, enter the length and width, and this insulation calculator shows the R-value ENERGY STAR recommends adding. Add the R-value per inch and the coverage printed on the product you're buying, and it also works out the depth to install and how many bags or rolls you need, with an optional 10% for waste. US units are the default, with a switch for metric.

How to use the insulation calculator

  1. Choose US or Metric units.
  2. Pick your climate zone and where you're insulating: an attic with no insulation, an attic that already has 3 to 4 inches, or a floor.
  3. Enter the length and width of the area.
  4. Optionally, enter the product details from the label: its R-value per inch and how much area one bag or roll covers at your target R-value.
  5. Press Calculate to see the R-value to add, the depth and the number of bags or rolls.

What R-value means

ENERGY STAR describes R-value as a measure of insulation's ability to resist heat traveling through it. The higher the R-value, the better the thermal performance. R-values add up when you stack layers, so a material rated R-3.5 per inch gives about R-35 at 10 inches. That's why you need to know the R-value per inch of the product you're buying: it turns the R-value you want into a depth you can measure with a ruler in the attic.

For retrofitting existing wood-framed buildings, ENERGY STAR recommends these levels, based on the 2021 International Energy Conservation Code:

ZoneAttic, uninsulatedAttic with 3–4 inFloor
1R30R25R13
2R49R38R13
3R49R38R19
4A and 4BR60R49R19
4C, 5 and 6R60R49R30
7 and 8R60R49R38

Zone 1 is the warmest part of the United States and zones 7 and 8 the coldest. If you don't know your zone, look up a climate zone map for your county before you buy.

The formulas

Area = length × width

Depth to add = R-value to add ÷ R-value per inch

Bags or rolls = area × 1.1 ÷ coverage per bag or roll, rounded up, when you include 10% for waste.

Worked example

An attic floor measures 40 by 30 feet, so the area is 1,200 square feet. The house is in climate zone 5 and the attic has no insulation, so ENERGY STAR recommends adding R60. The blown-in product you've chosen says R-3.5 per inch on the bag, and its coverage chart says one bag covers 40 square feet at R60.

  • Depth: 60 ÷ 3.5 = 17.1 inches
  • Bags: 1,200 × 1.1 ÷ 40 = 33 bags

Without the waste allowance, it would be exactly 30 bags.

Walls, basements and crawlspaces

ENERGY STAR also gives advice for walls whenever exterior siding is removed. For an uninsulated wood-frame wall, it suggests drilling holes in the sheathing and blowing insulation into the empty cavity before the new siding goes on, and adding insulative sheathing: R5 in zone 3 and R5 to R10 in zones 4 to 8. For basement or crawlspace walls, it suggests R5 sheathing or an R13 batt in zone 3, R10 sheathing or an R13 batt in zones 4A and 4B, and R15 sheathing or an R19 batt in zones 4C and 5 to 8. This calculator focuses on attics and floors, where most homes have the easiest and most cost-effective gains.

Tips before you start

  • Seal air leaks first. Gaps around pipes, wires and attic hatches let warm air escape no matter how much insulation you add.
  • Use the coverage chart for your R-value. Blown insulation covers less area per bag at higher R-values.
  • Keep vents clear. Don't block soffit vents or bury recessed lights that aren't rated for contact with insulation.
  • Wear protection. Gloves, long sleeves, eye protection and a mask make the job much more comfortable.

Batts or blown-in?

Insulation for attics mostly comes as batts or rolls, which are laid between the joists, or as loose fill, which is blown in with a machine. Batts are easy for a do-it-yourself job in an open attic with regular joist spacing. Loose fill flows around wires, pipes and awkward corners and is often used to top up existing insulation. Whichever you choose, the label tells you its R-value, and for loose fill a coverage chart shows how many bags you need per thousand square feet at each R-value. Enter the figure for your target R-value in the calculator.

Measuring the area

For an attic, measure the floor of the attic, not the roof: insulation goes on top of the ceiling below. Measure the length and width of the space between the outside walls. If the attic is L-shaped, split it into rectangles, run each one through the calculator and add the results. For a floor over a crawlspace or unheated garage, measure the floor area of the rooms above it.

Common mistakes

  • Using total R when topping up. If you already have 3 to 4 inches, use the top-up figure.
  • Ignoring the label. R-value per inch differs between products.
  • Compressing batts. Squashed insulation loses R-value.
  • Forgetting waste. Cutting and settling use extra material.

What next

Use this often? Add Insulation to your Home screen.

Frequently asked questions

How does the insulation calculator work out how much I need?

It uses ENERGY STAR's recommended R-value for your zone and area, divides it by your product's R-value per inch for depth, and divides the area by the bag or roll coverage for quantity.

What R-value should my attic have?

ENERGY STAR recommends adding R30 to R60 to an uninsulated attic depending on the zone, or R25 to R49 if it already has 3 to 4 inches.

How deep should attic insulation be?

Divide the R-value you need by the product's R-value per inch. R60 with a product rated R-3.5 per inch is about 17 inches.

How many bags of insulation do I need?

Divide the area by the coverage per bag at your target R-value, from the bag's chart, and add about 10% for waste.

Does the insulation calculator work in metric?

Yes. Switch to Metric to enter meters and see square meters and centimeters. R-values are ENERGY STAR's US values.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools