Saved

Press the star next to a tool's name to save it.

All my tools

Drywall Calculator

This drywall calculator works out the board area, number of 4 × 8, 4 × 10 or 4 × 12 sheets with waste, and the joint compound, tape, nails and adhesive for a room.

Restored your last values ·

Each door takes off about a third of a 4 × 8 sheet and each window a quarter. 5% is added for waste, and sheets are rounded up.

Worked out in your browser. Nothing is sent anywhere.

Drywall you need

–

Enter the room size and press Calculate.

See full result

A drywall calculator works out how many sheets of drywall you need for a room, plus the joint compound, tape and fasteners to finish it. Enter the room's length, width and wall height, choose whether to include the ceiling, add the number of doors and windows, and pick a sheet size. This drywall calculator gives the board area, the number of sheets with waste included, and estimates of compound, tape, nails and adhesive. Feet are the default, with meters a click away.

How the drywall calculator works

  1. Wall area: the perimeter of the room times the wall height, 2 × (length + width) × height.
  2. Ceiling area: length × width, if you include the ceiling.
  3. Openings: Millard Lumber's estimating guide deducts about 1/3 of a 4 × 8 sheet for each door and 1/4 of a sheet for each window. That's about 10.7 square feet per door and 8 square feet per window.
  4. Waste: the guide recommends adding another 5% for waste.
  5. Sheets: the board area plus waste divided by the area of one sheet, rounded up to a whole sheet.

Joint compound, tape and fasteners

The same guide gives quantities per amount of drywall, which the calculator scales to your room:

  • Joint compound: about 1 gallon of ready-mixed compound for 100 to 200 square feet, up to a 5-gallon pail for 900 to 1,000 square feet. Powder compound is estimated at 60 pounds per 1,000 square feet.
  • Tape: for 900 to 1,000 square feet, a 250-foot roll plus two 60-foot rolls, or about 370 feet in all.
  • Nails: about 5¼ pounds of coated drywall nails per 1,000 square feet, for 3/8-, 1/2- and 5/8-inch board.
  • Adhesive: with a 3/8-inch bead, about eight quart-size tubes for each 1,000 square feet.

The guide's tables are based on the adhesive-and-nail method. If you use screws instead of nails, follow the screw spacing recommended for your board.

Worked example

A bedroom is 14 feet long, 12 feet wide and 8 feet high, with one door and two windows, and you're covering the walls and the ceiling.

  • Walls: 2 × (14 + 12) × 8 = 416 square feet.
  • Ceiling: 14 × 12 = 168 square feet.
  • Openings: one door (10.7) and two windows (16) take off about 26.7 square feet.
  • Board area: about 557 square feet.
  • With 5% waste, that's 19 sheets of 4 × 8 drywall.
  • Finishing: about 2.8 gallons of ready-mixed compound, about 207 feet of tape, about 2.9 pounds of nails and 5 tubes of adhesive.

Choosing a sheet size

Standard sheets are 4 feet wide and 8, 10 or 12 feet long. Longer sheets mean fewer joints to tape and finish, but they're heavier and harder to carry and lift. The guide advises hanging drywall to leave the fewest possible joints: if the ceiling is under 8 feet 2 inches, a horizontal application gives about 25% fewer joints than a vertical one; for taller walls, install the sheets vertically.

Tips from the guide

  • Sketch the room first. A sketch lets you catch errors on paper, not on the job.
  • Do the ceiling first, then the walls, and run ceiling boards across the joists.
  • Use water-resistant board, usually with a green face paper, where moisture is a problem.
  • Use fire-rated Type X board where building codes require it.

How to use the drywall calculator

  1. Choose feet or meters.
  2. Enter the room length, width and wall height.
  3. Tick Include the ceiling if you're covering it too.
  4. Enter the number of doors and windows.
  5. Pick the sheet size and press Calculate.

Room by room or whole house

For several rooms, work out each room separately and add the results, or add up all the wall and ceiling areas first. Closets, hallways and stairwells are easy to forget, so list every space before you start. If a room isn't a simple rectangle, such as an L-shaped room, split it into rectangles, run the calculator for each part without the shared wall, and add the results together. That gives a slightly generous total, which is useful because irregular rooms usually need more cutting and create more waste than simple ones.

Handling large openings

The deductions for doors and windows are deliberately modest. Cutting around an opening still uses most of a sheet, and offcuts are rarely big enough to reuse elsewhere. For very large openings, such as a wide patio door or an archway, measure the opening and subtract its area from the board area yourself, then add the 5% waste back on. Garage doors, picture windows and open-plan gaps can make a big difference to the total.

Ordering tips

  • Order a sheet or two extra for damaged edges and mis-cuts.
  • Check the thickness: 1/2-inch board is common for walls, with thicker board where codes or fire ratings require it.
  • Plan deliveries so sheets can be stored flat and dry until you hang them.
  • Buy compound in larger pails if you're finishing several rooms; it's usually cheaper by volume.

Common mistakes

  • Forgetting the ceiling or a closet's walls.
  • No allowance for waste. Cuts around openings use extra board.
  • Mixing units. Measure everything in feet or everything in meters.
  • Deducting large openings fully. Offcuts around doors are rarely reusable.

What next

Use this often? Add Drywall to your Home screen.

Frequently asked questions

How does the drywall calculator work?

It adds the wall and ceiling area, takes off about a third of a sheet per door and a quarter per window, adds 5% waste and divides by the sheet area, rounding up.

How many sheets of drywall do I need for a 12 × 14 room?

With 8-foot walls, the ceiling, one door and two windows, about 19 sheets of 4 × 8 drywall.

How much joint compound do I need?

About a 5-gallon pail of ready-mixed compound for 900 to 1,000 square feet of drywall, or 60 pounds of powder per 1,000 square feet.

How much drywall tape do I need?

About 370 feet of tape for 1,000 square feet of drywall.

How much extra drywall should I buy?

Add about 5% for waste, and round up to whole sheets.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools