Saved

Press the star next to a tool's name to save it.

All my tools

Hydraulic Jump Calculator

Use this hydraulic jump calculator to find the downstream depth, head loss, jump length and efficiency in a rectangular channel from the upstream depth and Froude number.

Restored your last values ·

Enter the upstream depth and one of: the Froude number, the flow rate with the channel width, or the velocity. The channel is taken as rectangular, level and smooth.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you know, fill in the boxes and press Calculate.

See full result

A hydraulic jump calculator finds what happens when fast, shallow water in an open channel suddenly slows and deepens. From the upstream depth and the Froude number, flow rate or velocity, it gives the downstream depth, the head loss, the jump length and the efficiency.

How to use the hydraulic jump calculator

  1. Choose what you know: the Froude number, the flow rate and width, or the velocity.
  2. Enter the upstream depth and the matching values, in US or metric units.
  3. Press Calculate.

What a hydraulic jump is

A hydraulic jump is the abrupt rise in the water surface that forms where fast, shallow, supercritical flow meets slower, deeper, subcritical flow, as below a weir, a spillway or a sluice gate. This tool treats a jump in a rectangular channel and calls the two depths before and after the jump the conjugate depths. A lot of the energy of the water is turned into turbulence in the jump.

The Froude number

The Froude number compares the flow speed with the speed of a shallow-water wave: Fr = v ÷ √(gy), and it is dimensionless [1]. A value above 1 means supercritical flow, and below 1 subcritical. A jump forms only when the upstream flow is supercritical, so the tool reports an error if Fr is 1 or less.

The conjugate depth

For a rectangular channel of uniform width, the Bélanger equation gives the depth after the jump: y₂ ÷ y₁ = ½ (√(1 + 8Fr₁²) − 1), where Fr₁ is the upstream Froude number [1]. It follows from the conservation of mass and momentum, with the drag of the channel neglected, which is our own summary of the derivation.

Head loss

The energy lost in the jump, expressed as a head, is ΔE = (y₂ − y₁)³ ÷ (4y₁y₂), which the Wikipedia page gives [1]. It grows quickly with the Froude number, because the depths get further apart. For a depth of 0.5 m and Fr₁ of 1.806, the loss is 0.0798 m. The tool shows it in the unit of length that you chose.

Jump length and height

The tool estimates the jump length with L = 220 y₁ tanh((Fr₁ − 1) ÷ 22), an empirical fit that we use as a planning figure, and takes the height of the jump as the rise y₂ − y₁. The Wikipedia page puts the length at roughly 4 times the downstream depth for weak jumps, rising to about 6.2 times for steady and strong jumps [1], so treat the length as approximate. For the example above the length is about 4.03 m and the surface rises by 0.55 m.

Jump efficiency

The efficiency of a jump is worked out with a formula in the upstream Froude number: ((8Fr₁² + 1)^(3/2) − 4Fr₁² + 1) ÷ (8Fr₁²(2 + Fr₁²)) × 100, the ratio of the specific energy after the jump to that before it, which is our own working. It is the share of the upstream energy that is still in the flow downstream, so a value of 93.9 percent means that 6.1 percent is dissipated. A strong jump with Fr₁ of 5 keeps only about half of its energy, and so is better at dissipating it.

Types of jump

A common classification groups jumps by the Froude number: an undular jump with a wavy surface below about 1.7, a weak jump up to about 2.5, an oscillating jump up to about 4.5, a steady jump up to about 9, and a strong jump above that. The Wikipedia page lists the same Froude number ranges for the five types, and notes that they are approximate [1]. The tool names the class.

Flow rate and velocity

If you know the discharge Q and the channel width B, the upstream velocity is v₁ = Q ÷ (B y₁), since Q = v y B for a rectangular section. The tool then works out the Froude number with g = 9.80665 m/s², the standard value on the Wikipedia page [2], or 32.17405 ft/s² in US mode, which is the same figure in feet [2]. The velocity after the jump follows from continuity, v₂ = v₁y₁ ÷ y₂.

A worked example

Take a rectangular channel 2 m wide carrying 4 m³/s at a depth of 0.5 m. The velocity is 4 m/s and the Froude number is 1.806. The depth after the jump is 1.0516 m, which is 2.103 times the upstream depth. The downstream velocity is 1.90 m/s and the Froude number drops to 0.59, so the flow is subcritical. In US units, 150 ft³/s in a 6 ft channel at 1.5 ft deep gives Fr₁ of 2.4 and y₂ = 4.40 ft.

Assumptions and limits

The model is for a level, rectangular channel with a smooth bed, a steady flow and a jump from supercritical to subcritical flow. It ignores bed friction, a sloping floor, a channel of another shape and air entrainment. It also does not locate the jump: that depends on the water level downstream. For a spillway, stilling basin or culvert, a hydraulic engineer must make the design, as the loads are large.

Common mistakes

  • Using a Froude number of 1 or below. No jump forms in subcritical flow.
  • Mixing depth units. Use feet with US mode and metres with metric.
  • Entering the downstream depth. The tool needs the upstream, shallow depth.
  • Using it for a sloping or non-rectangular channel. The equations do not apply there.

What next

Use this often? Add Hydraulic Ju to your Home screen.

Frequently asked questions

What is a hydraulic jump calculator?

It finds the downstream depth, head loss, length and efficiency of the jump that forms when supercritical flow in a rectangular channel slows down.

What is the conjugate depth?

The depth of the water after the jump, from the Bélanger equation, y₂ over y₁ equals a half of the square root of 1 plus 8 Fr₁ squared, minus 1.

When does a hydraulic jump occur?

When the upstream flow is supercritical, with a Froude number above 1, and meets a high enough downstream water level.

How is the energy loss found?

The head loss is the cube of the depth difference divided by four times the product of the two depths.

Can I use it for a real spillway design?

No, it is an educational estimate for a level rectangular channel; a hydraulic engineer must design real structures.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools