Saved

Press the star next to a tool's name to save it.

All my tools

Headphone Power Calculator

Use this headphone power calculator to find the milliwatts an amplifier delivers into headphones from voltage and impedance, and estimate loudness from sensitivity.

Restored your last values ·

V
Ω

Enter the RMS voltage your amplifier or phone puts out and the headphones' impedance from their specifications. Add the sensitivity in dB SPL per milliwatt to estimate how loud they will play.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter a value and press Calculate.

See full result

A headphone power calculator works out how much power an amplifier delivers into a pair of headphones and, if you know the headphones' sensitivity, roughly how loud they will play. Enter the RMS output voltage and the headphones' impedance, add the sensitivity in decibels per milliwatt if you have it, and the calculator shows the power in milliwatts and watts, the current, the level in dBm and the estimated sound pressure level.

The headphone power formula

Power (W) = V_RMS² ÷ impedance
Power (mW) = power (W) × 1,000
Loudness (dB SPL) = sensitivity (dB/mW) + 10 × log10(power in mW)

Wikipedia's article on root mean square gives the average power in a resistive load as the square of the RMS voltage divided by the resistance. Headphones are not perfectly resistive, but their rated impedance is close enough for an estimate. The loudness formula comes from the way decibels work: Wikipedia's article on the dBm describes a level relative to one milliwatt as 10 times the base-10 logarithm of the power divided by one milliwatt. A sensitivity rating tells you the sound level at one milliwatt, so every tenfold increase in power adds 10 dB.

How to use the headphone power calculator

  1. Enter the RMS output voltage of your amplifier, phone or audio interface. Datasheets often give it as the maximum output.
  2. Enter the headphones' impedance in ohms from their specification.
  3. Optionally enter the sensitivity in dB SPL per milliwatt.
  4. Press Calculate to see the power and the estimated loudness.

Worked examples

  • 1 V RMS into 32 Ω: 1² ÷ 32 = 0.03125 W, which is 31.25 mW. With a sensitivity of 100 dB/mW, the level is about 100 + 10 × log10(31.25) = 114.9 dB SPL.
  • 0.5 V RMS into 300 Ω: 0.25 ÷ 300 = 0.83 mW, about 99.2 dB SPL at 100 dB/mW.
  • 2 V RMS into 300 Ω: 13.3 mW, four times the power of 1 V into the same headphones, because power rises with the square of the voltage.

Why impedance matters

For the same voltage, a lower impedance draws more current and takes more power. The same 1 V gives 31 mW into 32 Ω but only 3.3 mW into 300 Ω. That is why high-impedance headphones often need an amplifier that can swing a higher voltage, while low-impedance headphones need one that can supply more current. The calculator shows both the power and the current, so you can compare the result with your amplifier's specifications.

Sensitivity in dB/mW and dB/V

Manufacturers give sensitivity in two ways. Decibels per milliwatt tell you the loudness for a given power, while decibels per volt tell you the loudness for a given voltage. This calculator uses dB per mW. If your headphones are rated in dB per volt, the loudness at your voltage is simply the rating plus 20 × log10 of the voltage, so 1 V gives the rated level and 2 V adds about 6 dB.

Matching an amplifier to headphones

Work out the power and loudness at your amplifier's maximum output. If the result is far louder than you need, the amplifier has plenty of headroom. If it barely reaches a comfortable level, quiet recordings may sound weak and you may want a stronger amplifier. The aim is enough headroom for peaks in the music without turning the volume close to the maximum. For other power conversions, use the dBm to watts converter and the RMS to watts calculator.

Protecting your hearing

Headphones can produce very high sound levels, close to the ear. The estimated loudness is a peak figure for a steady tone at full output, and you will usually listen far below it. Keep the volume at a level where you can still hear people around you, take breaks, and turn it down if your ears ring after listening.

Finding the numbers you need

The impedance and sensitivity are printed in the specifications of most headphones, often on the box or the manufacturer's product page. The amplifier's output voltage is less often listed. Some headphone amplifiers give a maximum output in milliwatts at a stated impedance instead. You can turn that back into a voltage by rearranging the formula: the voltage is the square root of the power in watts times the impedance. For example, 100 mW into 32 Ω is the square root of 0.1 × 32, which is about 1.79 V. Enter that voltage to see the result for other headphones.

Comparing two pairs of headphones

Run the calculator twice with the same voltage and each pair's impedance and sensitivity. The pair with the higher estimated loudness will play louder from the same source. This is a quick way to see whether a new pair will work well with a phone or a laptop before you buy it, and whether you might also need a separate amplifier to get the most from it.

What the dBm figure means

The table also shows the power as a level in dBm, which is the power compared with one milliwatt on a logarithmic scale. One milliwatt is 0 dBm, ten milliwatts is 10 dBm, and a hundred milliwatts is 20 dBm. It is the same scale used for radio signals, and it makes it easy to see how many decibels of headroom an amplifier gives.

Common mistakes

  • Using the peak voltage. The formula needs the RMS voltage.
  • Mixing dB per mW and dB per volt. Check which one your headphones use.
  • Expecting exact loudness. Fit, seal and frequency all change what you hear.

What next

Use this often? Add Headphone Po to your Home screen.

Frequently asked questions

How does a headphone power calculator work?

It squares the RMS voltage and divides by the impedance to get the power, then adds 10 × log10 of the power in milliwatts to the sensitivity for the loudness.

How much power does 1 V give into 32 ohm headphones?

1² ÷ 32 = 0.03125 W, which is 31.25 mW.

How loud are 100 dB/mW headphones at 31 mW?

About 114.9 dB SPL, because 10 × log10(31.25) is about 14.9 dB.

Do high-impedance headphones need more power?

They need more voltage for the same power. The same voltage gives less power into a higher impedance.

What is the difference between dB/mW and dB/V?

dB per milliwatt rates loudness for a given power, and dB per volt for a given voltage. This calculator uses dB per mW.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools