A free-space path loss calculator finds how much a radio signal weakens over a clear line of sight between two antennas. Enter the distance and the frequency to get the loss in decibels, and add the transmit power and the antenna gains to get the power that reaches the receiver.
How to use the free-space path loss calculator
- Choose US or metric units.
- Enter the distance and the frequency.
- Add the power and the gains for the received power.
- Press Calculate.
The Friis equation
In free space, the ratio of the received power to the transmitted power for two isotropic antennas is (λ ÷ 4πd)², and the free-space path loss is the inverse, (4πd ÷ λ)² [1]. In terms of the frequency, it is (4πdf ÷ c)² [1]. The loss grows with the square of the distance and with the square of the frequency, so doubling either adds 6 dB.
In decibels
In decibels, the loss is FSPL = 20 log₁₀(4πdf ÷ c), where d is in metres, f in hertz and c is the speed of light, 299,792,458 metres per second [1]. This equals 20 log₁₀(d) + 20 log₁₀(f) − 147.55 [1]. The page gives a convenient form for kilometres and gigahertz: 20 log₁₀(d) + 20 log₁₀(f) + 92.45 [1].
A worked example
For a link of 1 kilometre at 2.4 gigahertz, the loss is 20 log₁₀(1) + 20 log₁₀(2.4) + 92.45, which is about 100.05 dB. At 5 gigahertz over 10 kilometres it is 126.43 dB. At 2.4 gigahertz over 1 mile, 1,609.34 metres, it is 104.18 dB. The calculator uses the exact formula with the constant c, and so gives these results to more digits than the rounded constants do.
Link budget
To find the received power, add the transmit power and the gains of both antennas, and subtract the path loss, all in decibels. With 20 dBm of transmit power, 3 dBi gain at each end and the 100.05 dB loss above, the received power is −74.05 dBm. This is the Friis link budget, and the sum is our own application of the formula on the page, with no cable or other losses.
Units
Enter the distance in miles or kilometres and the frequency in kilohertz, megahertz or gigahertz. The calculator converts to metres and hertz, and shows them in the working line. A power in dBm is relative to one milliwatt, so 20 dBm is 100 milliwatts and 0 dBm is 1 milliwatt. The calculator gives the received power in watts as well.
When the formula applies
The page states the conditions: the antennas must be in the far field, with the distance much larger than the wavelength, with lossless antennas, matched polarization, no multipath and a clear first Fresnel zone, at least 60 percent of it [1]. Where they do not hold, the real loss is higher than this formula gives, so treat the result as the best case.
What it leaves out
Real links also lose power in cables and connectors, in rain and fog, from buildings and trees, and by reflection from the ground, which can add or subtract. Enter a lower transmit power or antenna gain to allow for cable loss, and add a margin in your planning. The page includes a system loss factor that is at least 1 for hardware losses [1].
Frequency and range
Because the loss grows with frequency, a higher frequency carries a shorter distance for the same power and antenna gains. A link at 5 gigahertz has 6.4 dB more loss than one at 2.4 gigahertz over the same distance, since 20 log₁₀(5 ÷ 2.4) is 6.4. This is a central reason why lower frequencies reach farther, which is useful for long links.
Using the calculator
Choose your units, enter the distance and frequency and read the loss. Add a transmit power and the gains of the two antennas for the received power, and compare it with the sensitivity of the receiver. If it is higher by a margin of 10 to 20 dB, the link has a good chance of working. Check the working line for the units used.
More examples
At 900 megahertz over 5 kilometres, the loss is 20 log₁₀(5) + 20 log₁₀(0.9) + 92.45, which is 13.98 − 0.92 + 92.45, or 105.5 dB. That is 20.9 dB less than the 126.43 dB of the 5 gigahertz link over 10 kilometres, mostly because of the shorter distance and partly because of the lower frequency. These are our own calculations, and the calculator gives them in full precision.
Setting a margin
A link that only just works on paper will not work reliably in practice. Engineers add a fade margin, often 10 to 20 dB, for weather, small obstructions and variations in the equipment. Compare the received power with the receiver's sensitivity, and make sure that the difference is at least that margin before you rely on the link.
Choosing antennas
Antenna gain adds directly to the link budget, so a pair of high-gain antennas can make up for a long distance or a high frequency. Each 6 dB of gain, at either end, doubles the range that the link can span in free space. A gain of 12 dBi at each end offsets an extra 24 dB of path loss, which is about 16 times the distance. Check the legal limit on radiated power in your region before you add gain.
Common mistakes
- Mixing miles and kilometres. Check the units setting.
- Forgetting the gains. Add them to the received power.
- Entering the frequency in the wrong unit. Pick kHz, MHz or GHz.
- Expecting free-space loss in real life. Add a margin.
What next
Use this often? Add Free-Space P to your Home screen.
Frequently asked questions
What is a free-space path loss calculator?
A tool that finds the loss of a radio signal over a clear line of sight.
What is the formula for free-space path loss?
FSPL = 20 log₁₀(4πdf ÷ c) in decibels.
What is the loss at 2.4 GHz over 1 km?
About 100.05 dB.
Does doubling the distance change the loss?
Yes. It adds about 6 dB.
How do I find the received power?
Transmit power plus the antenna gains minus the path loss, in dBm and dB.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.