Saved

Press the star next to a tool's name to save it.

All my tools

Data Rate Converter

Enter a value in megabits per second and this data rate converter shows it in megabytes per second, or swap the units to convert megabytes per second to megabits per second. One megabit per second is 0.125 MB/s.

Restored your last values ·

Your result opens on the next page.

Result

12.5 MB/s

Enter a value to see the conversion.

See full result

To convert megabits per second to megabytes per second, multiply the number of megabits per second by 0.125. Both are units of data rate, so the relationship between them never changes. One megabit per second is 0.125 MB/s. Enter a value and this data rate converter gives the answer straight away; swap the units to turn megabytes per second back into megabits per second.

Data Rate formula

Megabytes per second = megabits per second × 0.125

To go the other way, multiply megabytes per second by 8 to get megabits per second. Because the factor is fixed, the answer is the same every time, and you can reverse the conversion without losing accuracy.

How to use the data rate converter

  1. Enter the amount in megabits per second. Decimals are fine.
  2. Check the units. From is megabits per second and To is megabytes per second. Press Swap units to convert megabytes per second to megabits per second.
  3. Read the result, with the same amount in other data rate units in the table below.

Worked example

A measurement comes to 250 megabits per second. Multiply by 0.125 to get 31.25 MB/s. Going the other way, 4 megabytes per second × 8 = 32 Mbps.

Megabits per second to megabytes per second conversion chart

These values cover amounts commonly converted between megabits per second and megabytes per second.

Megabits per second (Mbps)Megabytes per second (MB/s)
1 Mbps0.125 MB/s
5 Mbps0.625 MB/s
10 Mbps1.25 MB/s
25 Mbps3.125 MB/s
50 Mbps6.25 MB/s
100 Mbps12.5 MB/s
250 Mbps31.25 MB/s
500 Mbps62.5 MB/s
1,000 Mbps125 MB/s
10,000 Mbps1,250 MB/s

What is a megabit per second?

A megabit per second, written Mbps or Mbit/s, is one million bits passing a point every second. Data rate units are commonly multiples of bits per second and bytes per second, and home internet connections are usually advertised in megabits per second. A bit is the smallest piece of digital information, so eight of them are needed to make one byte. When an internet plan promises 100 Mbps, it refers to this unit, not to megabytes, which is why downloads often look slower than people expect.

What is a megabyte per second?

A megabyte per second, written MB/s, is one million bytes passing a point every second. In the context of data rates, one byte consists of eight bits. Download managers, browsers and file copies usually show their speed in megabytes per second, because files are measured in bytes. Look closely at the letter B in any abbreviation. A capital B means bytes, and a lower-case b means bits, so 10 MB/s is eight times faster than 10 Mb/s.

Estimating in your head

For a rough answer, divide the number of megabits per second by about 8.00. Going the other way, multiply the number of megabytes per second by about 8.00. Rounded figures are fine for a quick check, but use the converter when the result matters, because small differences add up over large amounts. A useful habit is to write the unit beside every number, so that you can see at a glance which way the conversion should go. It also helps to compare the two units directly: one megabit per second is 0.125 MB/s, and one megabyte per second is 8 Mbps.

Converting megabits per second to megabytes per second in a spreadsheet

To convert a whole column of megabits per second in Excel or Google Sheets, put the megabits per second in column A and type =A1/8.0 in the first cell of column B, then fill the formula down. To go back from megabytes per second to megabits per second, use =A1*8.0. The rule is the same as on paper: divide the number of megabits per second by about 8.00. Check one row against this converter before you trust the whole column.

Rounding the answer

The converter shows up to six significant digits so that nothing is lost, but most real measurements don't need that much precision. Quote only as many digits as your original measurement supports. Always convert the full figure first and round only the final answer.

Reading the table of units

Under the main answer, the converter lists the same amount in other data rate units. You don't need a second converter if a form, a label or a teacher asks for a different unit: read it straight from the table. Change the From and To lists to make any of those units the main answer instead, or press Swap units to reverse the direction.

Checking your answer

A quick sense check catches most slips. The number of megabytes per second should be about 8.00 times smaller than the number of megabits per second. If your answer is far away from that, you may have multiplied when you should have divided.

Why exact conversions matter

Small errors in a conversion grow quickly when a figure is multiplied, shared or reused in another calculation. Using the exact definitions of the units, rather than a rounded rule of thumb, keeps results consistent between people, documents and software. This converter uses the defined relationship between megabits per second and megabytes per second for every answer, so the same input always gives the same result, and you can copy it straight into a report, a spreadsheet or a homework answer. When you share a converted figure, give its unit and say how you rounded it, so anyone can check your working.

Quick reference

One megabit per second is 0.125 MB/s. Ten megabits per second is 1.25 MB/s. One megabyte per second is 8 Mbps.

Common mistakes

  • Multiplying instead of dividing. Check whether your answer should be larger or smaller.
  • Dropping digits. Round only at the end.
  • Mixing up similar units. Read the symbols carefully.

Try the data size converter all units, the kilobyte to bit converter and the power converter all units.

These are the data rate conversions that people look up most often, with the factor for each direction. All of them work in the converter above: choose the two units, or press Swap units to reverse a pair.

ConversionFactorReverse conversionReverse factor
Gbps to GB/s× 0.125Gigabytes per second to gigabits per second× 8
Gbps to MB/s× 125Megabytes per second to gigabits per second× 0.008
Kbps to Bps× 1,000Bits per second to kilobits per second× 0.001
Kbps to GB/s× 1.25 × 10⁻⁷Gigabytes per second to kilobits per second× 8,000,000
Kbps to Gbps× 1 × 10⁻⁶Gigabits per second to kilobits per second× 1,000,000
Kbps to MB/s× 0.000125Megabytes per second to kilobits per second× 8,000
Mbps to Bps× 1,000,000Bits per second to megabits per second× 1 × 10⁻⁶
Mbps to GB/s× 0.000125Gigabytes per second to megabits per second× 8,000
Mbps to Gbps× 0.001Gigabits per second to megabits per second× 1,000
Mbps to Kbps× 1,000Kilobits per second to megabits per second× 0.001
Mbps to MB/s× 0.125Megabytes per second to megabits per second× 8

More about the data rate units

  • Bit per second (bps). A bit per second is the basic unit of data transfer rate. A bit is the smallest unit of digital information, a single 0 or 1.
  • Kilobit per second (kbps). A kilobit per second, written kbit/s or often kbps, is a unit of data transfer rate equal to 1,000 bits per second. Because this is a decimal multiple, it's different from the binary kibibit.
  • Megabit per second (Mbps). A megabit per second, written Mbps or Mbit/s, is one million bits passing a point every second. Data rate units are commonly multiples of bits per second and bytes per second, and home internet connections are usually advertised in megabits per second.
  • Gigabit per second (Gbps). A gigabit per second, written Gbit/s or often Gbps, is a unit of data transfer rate equal to 1,000 megabits, or one billion bits, per second. It's used to describe fast home fiber connections and network equipment.
  • Megabyte per second (MB/s). A megabyte per second, written MB/s, is one million bytes passing a point every second. In the context of data rates, one byte consists of eight bits.
  • Gigabyte per second (GB/s). A gigabyte per second, written GB/s, is a unit of data transfer rate equal to 1,000 megabytes, or eight gigabits, per second. It's a very high rate that's often used to describe storage devices and internal computer connections.

What next

Use this often? Add Data Rate to your Home screen.

Frequently asked questions

How does the data rate converter work?

It uses the fixed relationship between the two units: one megabit per second is exactly a set fraction or multiple of one megabyte per second.

How many megabytes per second are in a megabit per second?

One megabit per second is about 0.1250 megabytes per second.

How many megabits per second are in a megabyte per second?

One megabyte per second is about 8.000 megabits per second.

How do I convert megabytes per second to megabits per second?

Press Swap units, then enter the number of megabytes per second.

How do I convert Gbps to bps?

Multiply by 1,000,000,000. One gigabit per second is one billion bits per second, so 2.5 Gbps is 2,500,000,000 bps.

What are the most common data rate conversions?

Among the pairs people look up most are gigabits per second to gigabytes per second (multiply by 0.125); gigabits per second to megabytes per second (multiply by 125); kilobits per second to bits per second (multiply by 1,000); and kilobits per second to gigabytes per second (multiply by 1.25 × 10⁻⁷). The table of popular conversions on this page lists the rest.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters