Saved

Press the star next to a tool's name to save it.

All my tools

Electric Current/Charge Converter

This electric charge converter changes a charge between coulombs, milliampere-hours, ampere-hours, elementary charges and more. A second mode finds the charge a steady current carries in a given time, using Q = I × t.

Restored your last values ·

Pick a mode. To convert, type the amount and choose the unit you have and the unit you want. For current and time, type the current in amperes and the time, then choose its unit.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter a charge, or a current and a time, to see the result.

See full result

What this electric charge converter does

Electric charge is measured in coulombs in the SI system. This electric charge converter moves a value between the units people meet in physics, electronics and battery specifications: coulomb, kilocoulomb, millicoulomb, microcoulomb, nanocoulomb, picocoulomb, ampere-hour, milliampere-hour, the elementary charge and the faraday. It also has a second mode that finds the charge delivered by a steady current over a stated time.

The coulomb is the unit everything else is built on. It is defined as the charge delivered by a current of 1 ampere in 1 second. [2] That one sentence links charge to the current and time inputs of the second mode.

How to use it

  1. Choose "Convert a charge" or "Charge from current and time" in the first box.
  2. For a conversion, type the amount, then pick the unit you have under From and the unit you want under To.
  3. For current and time, type the current in amperes, then the time and its unit: seconds, minutes or hours.
  4. Press Calculate. The main result is shown first, followed by the same charge in coulombs, ampere-hours and elementary charges.

The units and their sizes

UnitSize in coulombs
Kilocoulomb (kC)1,000 C
Millicoulomb (mC)0.001 C
Microcoulomb (µC)0.000001 C
Nanocoulomb (nC)10^-9 C
Picocoulomb (pC)10^-12 C
Ampere-hour (Ah)3,600 C
Milliampere-hour (mAh)3.6 C
Elementary charge (e)1.602176634 × 10^-19 C
Faraday (F)about 96,485.33 C

One ampere-hour equals 3,600 coulombs, which follows straight from the definition: 1 A for 3,600 seconds. [2] A milliampere-hour is a thousandth of that, 3.6 C.

The elementary charge and the faraday

The elementary charge is the charge of a single proton. Its value is 1.602 176 634 × 10^-19 C, and NIST lists it as exact. [1] The calculator uses it to say how many elementary charges a given charge contains. One coulomb is a little over 6.24 × 10^18 of them.

The faraday here means the charge of one mole of elementary charges. NIST gives the Faraday constant as 96 485.332 12 coulombs per mole and marks it exact. [3] We use that figure, which is the elementary charge times the Avogadro constant, so one faraday is about 96,485.33 C. This is the same number that appears in electrolysis calculations.

The formula for current and time

When a steady current flows, the charge is the current times the time: Q = I × t, with Q in coulombs, I in amperes and t in seconds. The calculator converts minutes and hours to seconds first. Because 1 A for 1 s is 1 C by definition, this formula needs no extra constant. [2]

Worked examples

Example 1: a phone battery is rated 2,000 mAh. Converting to coulombs gives 2,000 × 3.6 = 7,200 C. That equals 2 Ah. Choose milliampere-hour as the From unit, coulomb as the To unit and type 2000 to see it.

Example 2: a steady 2 A current flows for 30 minutes. The time is 1,800 seconds, so Q = 2 × 1,800 = 3,600 C. That is exactly 1 Ah, or 1,000 mAh.

Example 3: how many elementary charges are in 1 C? Choose coulomb to elementary charge. The answer is about 6.241509 × 10^18.

Where each unit is used

  • Coulomb, millicoulomb and microcoulomb: textbook problems, capacitors and static electricity.
  • Nanocoulomb and picocoulomb: tiny charges in sensors and electrostatic work.
  • Ampere-hour and milliampere-hour: batteries, power banks and chargers.
  • Elementary charge: atomic and particle physics.
  • Faraday: electrochemistry, such as plating and electrolysis.

Tips and common mistakes

  • Do not confuse mAh with mA. A rating in mAh is a charge. A rating in mA is a current.
  • An mAh figure on a battery does not say the voltage. To compare energy you also need volts, because energy is charge times voltage.
  • In the current mode, make sure the time unit matches the number. 30 means 30 minutes only if you chose minutes.
  • A negative current is allowed and gives a negative charge, which just means the flow runs the other way.
  • Very large and very small results are shown in powers of ten, written like 6.241509 × 10^18.

The charge in a battery label is a nominal capacity. A cell rated 2,000 mAh seldom delivers exactly that in use, and it falls with age, heat and high discharge rates. Treat the converted number as a label figure, not a promise.

What the calculator does not do

It does not work out voltage, energy or battery life, and it does not model a changing current. If the current varies, split the time into parts, find the charge in each part and add the charges. For a capacitor, charge also equals capacitance times voltage, which is a different formula from the one used here.

A quick way to compare batteries

Battery makers print capacity in milliampere-hours because it is easy to compare cells of the same voltage. A 3,000 mAh cell holds more charge than a 2,000 mAh cell. If you convert both to coulombs, you can see the gap in the SI unit: 10,800 C against 7,200 C. The converter does this in one step and also gives the same figure in ampere-hours, which is handy for larger packs such as those used in vehicles and solar storage.

Working with very small charges

Static electricity and sensor signals involve charges of nanocoulombs and picocoulombs. A nanocoulomb is a billionth of a coulomb. Because these amounts are tiny, the result may be shown in powers of ten, such as 6.241509 × 10^9. To read it, move the decimal point to the right by the number after the 10^ sign. You can also choose a nearer unit, for example microcoulombs, to see a friendlier number.

How to check your answer by hand

To check a conversion without the tool, change the starting amount to coulombs by multiplying with the unit size in the table, then divide by the size of the target unit. For 2,000 mAh to Ah, multiply by 3.6 to get 7,200 C, then divide by 3,600 to get 2 Ah. Doing the same sum a second way is a good habit in physics and engineering, because a slipped power of ten is the most common error.

What next

Use this often? Add Electric Cur to your Home screen.

Frequently asked questions

What is an electric charge converter?

It is a tool that changes a charge from one unit to another, such as milliampere-hours to coulombs, and can also find charge from current and time.

How do I convert mAh to coulombs?

Multiply by 3.6. One milliampere-hour is 3.6 coulombs, so 2,000 mAh is 7,200 C.

How many elementary charges are in one coulomb?

About 6.241509 × 10^18, found by dividing 1 C by the elementary charge of 1.602176634 × 10^-19 C.

What is the formula for charge from current?

Q = I × t. The charge in coulombs is the current in amperes times the time in seconds.

Is 1 Ah the same as 3,600 coulombs?

Yes. One ampere for one hour is 3,600 seconds, so it carries 3,600 coulombs.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools