Saved

Press the star next to a tool's name to save it.

All my tools

Ohms Law Calculator

Use this ohms law calculator to find the voltage, current, resistance and power of a resistor from any two known values, with the Joule heat given off over a time.

Restored your last values ·

Enter any two of the four values and leave the other two empty. You get the other two. Add a time in seconds to see how much heat the resistor gives off in that time.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Fill in any two of voltage, current, resistance and power, then press Calculate.

See full result

An ohms law calculator finds the missing electrical values of a resistor from any two you know. Enter two of the voltage, the current, the resistance and the power, and it gives the other two, and the heat given off over a time you choose, so it also serves as a power dissipation and Joule heating calculator.

How to use the ohms law calculator

  1. Choose two of the four values and fill in those boxes.
  2. Leave the other two boxes empty.
  3. Add a time in seconds if you want the heat energy.
  4. Press Calculate.

What Ohm's law says

Ohm's law links the voltage across a conductor to the current through it. The usual forms are I = V ÷ R, V = I × R and R = V ÷ I, where I is the current, V the voltage and R the resistance [1]. For an ohmic conductor, the current is proportional to the voltage, and the resistance stays constant whatever the current [1]. The calculator uses these relations, together with the power formula, to fill in the two values that you leave blank.

The two inputs

The calculator needs any two of the four values, which are the voltage, the current, the resistance and the power, and gives the other two. There are six possible pairs. The calculator handles all of them: voltage and current, voltage and resistance, voltage and power, current and resistance, current and power, and resistance and power. If you give more than two, it uses the first two in that order and tells you.

The power formulas

Power is the voltage times the current, P = V × I [2]. Substituting Ohm's law gives the two other forms, P = I² × R and P = V² ÷ R. Wikipedia writes the three together as P = IV = I²R = V²/R [2]. The pairs that need a square root, such as V = √(P × R), are our own algebra from those relations.

A worked example

Take a battery of 18 volts that drives 6 amperes, which is a power of 6 × 18 = 108 watts. The resistance is R = 18 ÷ 6 = 3 ohms. Enter the voltage and current, and the tool returns 3 ohms and 108 watts. Enter the resistance of 3 ohms and the power of 108 watts instead, and it returns the same 18 volts and 6 amperes, which is a useful check.

Joule heating

When current flows through a resistor, the electrical power is turned into heat. This is Joule heating, and Joule's first law says that the heating power equals the resistance times the square of the current [2]. The power of the result is therefore the rate of heating. If you enter a time, the calculator multiplies the power by the time to give the energy in joules and in watt-hours. Our sources do not state the energy formula directly, so that multiplication is our own working.

Power dissipation and resistor wattage

A resistor must be able to get rid of the heat that it makes. The power in the result is the amount that the resistor dissipates for the values you entered. Compare it with the power rating on the data sheet of the part. A rating below the result means that the part will overheat. We do not give a safety margin, as none of our pages states one, so apply the rule of your design guide.

Voltage drop across a resistor

The voltage across a resistor in a circuit is the voltage drop. To find it, enter the current that flows and the resistance, and the voltage in the result is the drop, from V = I × R [1]. For example, 0.02 amperes through 220 ohms gives a drop of 4.4 volts and a power of 0.088 watts. The same page covers the current calculator and the resistance calculator, because the solved quantity can be any of the four.

When Ohm's law does not apply

Ohm's law is valid only under certain conditions, such as a fixed temperature [1]. It does not describe non-ohmic parts such as a diode, whose current does not rise in proportion to the voltage [1]. A lamp filament heats up as the current rises, so its resistance changes. Use the calculator for resistors and for ohmic parts at a steady temperature, and treat any other result as a rough guide only.

Units

The voltage is in volts, the current in amperes, the resistance in ohms and the power in watts. The time is in seconds, and the heat is given in joules and watt-hours. If your numbers are in milliamperes or kilo-ohms, convert them first: 20 milliamperes is 0.02 amperes, and 4.7 kilo-ohms is 4,700 ohms. The results are shown to six significant digits, so a very small or very large value is shown with an exponent.

Using the calculator

Fill in the two values you know and press the button. Read all four values in the first result, and the working below it. Change one input to see how the others move: doubling the voltage across a fixed resistor doubles the current but quadruples the power, since the power depends on the square of the voltage. This is why a small rise in the supply can overload a resistor.

Common mistakes

  • Entering more than two values. Only two are needed: clear the others.
  • Mixing milliamperes and amperes. Convert to amperes first.
  • Ignoring the power rating of the resistor. Compare the result with the data sheet.
  • Using the law for diodes or lamps. Their resistance changes with the current.

What next

Use this often? Add Ohms Law to your Home screen.

Frequently asked questions

What is an ohms law calculator?

A tool that finds the missing voltage, current, resistance or power from any two of them.

What is Ohm's law?

V = I × R, which can also be written I = V ÷ R and R = V ÷ I.

How do I find power from voltage and resistance?

Use P = V² ÷ R, which follows from P = V × I and Ohm's law.

What is Joule heating?

The conversion of electrical power in a resistor into heat, at a rate of I² × R.

Does Ohm's law work for every component?

No. It holds for ohmic conductors at a steady temperature, not for diodes or transistors.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools