Saved

Press the star next to a tool's name to save it.

All my tools

Doppler Effect Calculator

Use this Doppler effect calculator to find the frequency a listener hears from the frequency of the source and the speeds and directions of the source and the listener.

Restored your last values ·

Enter the frequency of the source and the speeds of the source and the listener, with the direction of each. You get the frequency that the listener hears, and the shift.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the frequency and the speeds, then press Calculate.

See full result

A Doppler effect calculator finds the frequency that a listener hears when the source of a sound, the listener or both are moving. Enter the frequency of the source, the speeds, and whether each is moving towards or away from the other. It gives the observed frequency and the shift.

How to use the Doppler effect calculator

  1. Choose the speed unit.
  2. Enter the frequency and the speeds, with the direction of each.
  3. Press Calculate.

What the effect is

The Doppler effect is the change in the frequency of a wave, as seen by an observer who is moving relative to the source of the wave [1]. A sound that comes closer is heard at a higher pitch, the same pitch at the instant of passing, and a lower pitch while it recedes [1]. A siren on a passing vehicle starts high, slides down as it passes and stays lower.

The formula

The page gives the observed frequency as f = ((v + v_r) ÷ (v − v_s)) f₀ in the usual reading, where v is the speed of the wave in the medium, v_r the speed of the receiver and v_s that of the source [1]. The speed of the receiver is added if it moves towards the source and subtracted if it moves away [1]. The speed of the source is subtracted if it moves towards the receiver, and added if it moves away [1].

A worked example

A source of 500 hertz moves towards a listener at 30 metres per second, with sound at 343 metres per second. The listener hears 343 ÷ (343 − 30) × 500, which is 547.92 hertz. When the source moves away, the listener hears 343 ÷ (343 + 30) × 500 = 459.79 hertz. The speed of sound is not given in the page that we read, so we use the common value for air at 20 degrees Celsius.

Moving listener

A listener who walks towards a fixed source at 10 metres per second hears (343 + 10) ÷ 343 × 500 = 514.58 hertz. If both move towards one another, with the source at 30 and the listener at 10 metres per second, the pitch is 563.90 hertz. The calculator lets you set the direction of each separately, so it covers all four combinations.

The page's examples

The page gives examples with a source that moves at 0.7 of the speed of the wave. Ahead of the source, the received frequency is 3.33 times the source frequency, and behind it is 0.59 times [1]. To reproduce this, enter 240.1 metres per second for the source, with the default 343 for the speed of sound, and compare the ratio. The calculator gives 3.33333, as the page does.

Radar

The page gives a radar example. A police radar at 24.15 gigahertz measures a Doppler shift of about 4.83 kilohertz for a vehicle at 30 metres per second [1]. That is a different case, for a reflected radio wave, and it needs the relativistic or the double-shift form, so it is not what this calculator does. The calculator is for sound and other waves in a medium that moves slowly compared with the wave.

Speeds relative to the air

In the formula, the speeds are measured relative to the medium, and not relative to each other. A wind changes the result, since it moves the medium. For a still medium, which is the case here, the speeds relative to the ground are right. If there is a wind, add it to the speed of the source and the listener along the line between them.

Limits

The formula fails if the source moves as fast as the wave or faster, since the denominator becomes zero or negative. The calculator gives an error in that case. For light and other waves in a vacuum, only the relative speed matters [1], and the relativistic Doppler formula is needed for fast sources. The calculator is not for these.

Using the calculator

Choose the unit of speed, enter the source frequency, then the speeds with the direction of each, and press the button. Leave the speed of sound blank for 343 metres per second, or enter your own, in the unit that you chose. The result also shows the shift in hertz, which is the size of the change in pitch.

A passing train

A train horn of 1,000 hertz on a train at 100 kilometres per hour, which is 27.78 metres per second, is heard at 1,088.1 hertz as it approaches a listener standing by the track, and at 925.1 hertz as it recedes. The change between the two, about 163 hertz, is nearly three semitones, which is the familiar drop in pitch as a train passes. These are our own calculations, and they use 343 metres per second for the speed of sound.

Other waves

The Doppler effect applies to all waves. For sound in air, the speeds are measured relative to the air. For light, the shift is used in astronomy to measure how fast stars and galaxies move towards or away from us, and in radar and medical ultrasound to measure speeds. The formula in this calculator is the one for waves in a medium.

Common mistakes

  • Measuring the speeds relative to the ground in a wind. Use speeds relative to the air.
  • Entering a supersonic source. It is not valid.
  • Mixing the units of the speeds. Use one unit for all.
  • Swapping towards and away. Towards raises the pitch.

What next

Use this often? Add Doppler Effe to your Home screen.

Frequently asked questions

What is a Doppler effect calculator?

A tool that finds the frequency heard when a source or a listener is moving.

What is the Doppler formula for sound?

f = ((v + v_r) ÷ (v − v_s)) f₀ with signs set by the directions.

Does a source moving towards me raise the pitch?

Yes. The pitch is higher during the approach and lower after it passes.

What speed of sound does the calculator use?

343 m/s unless you enter another.

What if the source is supersonic?

The formula does not apply, and the calculator reports an error.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools